Results 1 to 10 of 10
Thread: Thermalright HR-02 Macho Review
10-19-11, 09:19 AM #1
Thermalright HR-02 Macho ReviewMuddocktor takes a close look at the Thermalright HR 02 Macho, a heatsink designed for use with and without a fan. As a revamped and low price brother to the original HR 02, how does it perform...?
... Return to article to continue reading.
Last edited by David; 10-19-11 at 09:39 AM.
10-19-11, 09:24 AM #2
Another excellent article, which is a pleasure to read.
Thanks Jim!David J. Nelson MChem(Edin) PhD(Strath) MRSC [ResearcherID: D-3927-2011] [Google Scholar]
OC Forums Super Moderator // Overclockers.com Editor
The Workhorse: [Lenovo W510] Intel Core i7-720QM / 8 GB DDR3 / nVidia Quadro FX880M / Crucial M4 256 GB SSD / Windows 7
The Home Machine: AMD Llano A6-3650 APU / 8 GB DDR3 / Lots of HDDs / Antec Dark Fleet DF-85 Case / Windows 7
The Benchmarking Setup: Various LGA775 chips / Asus Rampage Formula / 2 GB OCZ 1066 MHz DDR2 / nVidia Quadro NVS 285 / 320 GB HDD / Windows 7 [ Untouched for well over a year ]
My research fellowship is eating all my time, so I may be slow to reply to emails and private messages.
10-19-11, 11:13 PM #3
Thank you David.
I figured this one would gather some attention right away, especially with it's performance for the price it sells for, but I guessed wrong.
10-21-11, 01:24 AM #4
- Join Date
- Dec 2010
Great read, GJ as usual.
10-21-11, 02:41 AM #5
- Join Date
- Aug 2011
Interesting.. Never seen a heatsink with holes/slots in the fins before.. Are there any others that are like that as well?
Also, what size are they? Ok its a slot and not a hole, but if you drill a hole in a plate, you actually lose surface area when the hole diameter is twice that to the plate thickness, so something similar will occur if too big slots are used. At least from the pictures they seem big enough to do that..
Wouldn't losing surface area be bad for dispersing heat, or am I getting something wrong here.. Or! Is it to, again, reduce cost?
Argh.. Have to stop thinking too much into heatsink design. It's hurting my brain.
10-21-11, 08:45 AM #6
The big hole in the middle area of the heatsink is to give you access to the mounting screw with a long shank screwdriver to mount the heatsink. The slots are there to help promote airflow between the fins I guess, in fanless mode. This heatsink was originally designed a year ago or so to run without a fan; just using normal case airflow for cooling. I'm no thermodynamics engineer that can give you a scientific reason for them though.
10-21-11, 09:58 AM #7
This is an impressive cooler. Especially at that price. Great review as usual. Looking forward to more availability of these. I may have to pick one up.
10-27-11, 12:29 PM #8
I had wanted to use this HS for a build ~1.5 months ago (think it was announced 3-4 months ago), but was disappointed to discover it really was unavailable anywhere, which still appears to be the case
Well, not that I would have any use for one now =pCurrent
6600K | ASRock Z170 Gaming-ITX/ac | Noctua NH-D9L
Gigabyte GTX 1070 Mini | 2x8GB Crucial LP
Seasonic X650 | NCASE M1
10-27-11, 02:05 PM #9
- Join Date
- Oct 2011
I would have picked this up, but I was offered a good price for the Noctua. This thing looks huge! So Im sure the cooling is very very good.
10-27-11, 02:19 PM #10
If you are worried about buying from Nan's, they also sell through Amazon too and for the same price. That way you have Amazon guaranteeing that you will have your goods delivered.