Results 1 to 6 of 6
  1. #1

    Hotrod Heatsink: Faster Fans for the Noctua NH-D14

    We are overclockers. We are not satisfied with stock. Like our automotive forebears we hotrod our rigs, pushing them to faster speeds. That?s what we do. And when we do it, our chips get hot and we need to cool them off.

    Let's say you really want to overclock your CPU, and you want to cool it with air. You know that the Noctua NH-D14 is a very good heatsink, designed for quiet cooling; but you want more. Can you get better cooling from a D14?

    ... Return to article to continue reading.
    Last edited by mdcomp; 01-20-12 at 11:51 AM.

  2. #2
    Grammer, its my favoriate thing

    Mario1's Avatar
    Join Date
    Nov 2009
    Location
    Pleven, Bulgaria
    Benching Profile
    "So it is perfectly compatible with the D14 — after you do a little modding (link)."
    Doesn't link to anywhere.
    Dis is mai Pee-Cee;
    MB: Gigabyte 990FXA-D3 (rev 1.x)
    CPU: Phenom II X4 850 (stock clocks, undervolted @ 1,3v)
    CPU Cooler; Box AM2 cooler
    RAM: 2x4GB Corsair Vengeance & 1x2GB Corsair XMS3 @ 804mhz 9-9-9-24 1T CR
    Graphics card: HD3650 1GB DDR2 (400/400, runs at x4 for some weird reason)
    HDD: WesternDigital Caviar Black 1TB, SATA III, 64MB Cache
    PSU:Corsair CX430
    Case: CoolerMaster Elite 430 (3x 120mm Thermaltake intake fans; 1 front, 1 side, 1 bot. 3x 120mm Thermaltake exhaust fans; 2 top, 1 back)

  3. #3
    Member

    psionic98's Avatar
    Join Date
    Jun 2009
    Location
    4th Floor office, East Coast
    Heatware Profile
    Nice writeup. I think the missing link just tells you how to mod it to work with the noctua clips. The clips are made for 140mm hole setup and the other one is setup to attach to 120mm.
    EVGA x58 Micro (756) / i7 D0 @ 4.0, 1.278v w/HT (Air)
    2x 300GB V-rap raid0, WD Caviar Black 640GB & 1TB
    HIS 6950 @ 840/1450
    Mushkin 6GB @ 6-7-6-18
    / Enermax 720 Modular
    HAF 922 / Noctua D14Win7 Pro x64 / Mint 10
    HEAT
    i7(x58) OC'ing/Info
    / AMD Oc'ing/Info / C2D/C2Q OC'ing/Info
    Recommended Power Supply Listing

  4. #4
    Retired muddocktor's Avatar
    10 Year Badge
    Join Date
    Nov 2001
    Location
    New Iberia, LA
    Author Profile Benching Profile Folding Profile SETI Profile Heatware Profile Rosetta Profile
    Very nice writeup, ehume!

  5. #5
    aHa! Caught! The missing link!!!

    OK, here's how you mod it:

    Let's start with a normal fan. In this case I have cut the corners out of a Gentle Typhoon. Notice how the clip holder pushes only partly through the flange of the fan:



    Now you need The Tool: a 9/32-inch drill bit. You can also use a 7mm drill bit, but that could be a little tight, so you might use an 8mm drill bit. Here is the GT with The Tool:



    You grip the drill bit in your hand and slowly drill what is called a countersink hole partway through the flange. I suggest you practice on the intake side of a fan to get the feel of how it is done. If you are too strong or don't know when to quit, you can fully enlarge a hole, and that is not what you want to do.

    This is what you want to do:



    Note the the enlarged hole -- the countersink -- only goes partway through the flange. The idea is to accommodate the clip holder peg's larger diameter without letting it pull all the way through.

    When you are done you will get this:



    You do this for all four corners, and you put the clip ends through these pegs. Now your fan will fit onto a Noctua fin stack with Noctua clips.
    Fan comparison: 65 Fans Tested on a Megahalems

    Good Cases for Air Cooling

    Core i7 4770K @4.3GHz + HD 4600 w/1GB system RAM | GA-Z87X-UD4H f7
    Armageddon w/two NF-A15's | 2x4GB Crucial Ballistix @1600MHz
    Samsung 840 Pro 512GB | Seagate Barracuda 7200.12 1TB file disk | WD Red 3TB backup
    CM N600 1x GT - AP12 + 1xNF-P12+ULNF front, TY-140 top intake, NF-S12A mid-case, PWM frankenfan side intake

  6. #6
    Senior Headphone Guru
    TollhouseFrank's Avatar
    10 Year Badge
    Join Date
    Nov 2004
    Location
    T3h Intr@tub3z!
    nice article. it is surprising what the cost of performance vs. noise can be.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •