Hello to everyone over at OCF, this is my first post
i have an athlon ii x4 630 with stock cooler,a msi890gxm g65 mobo and an msi 5770 graphics card
after checking hw monitor and coretemp my idle temps show as much as 65 degrees!!! after finding out that its supposed to idle at around 25 degrees, i changed the vcore to 1.35v and the NB voltage to 1.15 instead of putting them on auto hoping that it would fix the problem but it hasn't helped
my case has a 120mm intake fan in front and a 140mm exhaust on top, and the cables are routed to ensure max airflow, the CPU even runs at STOCK speed, how can i get it to operate at proper temperatures
once i get that done i want to know how to get a modest 3.0 ghz overclock on the stock cooler with stock volts so i dont get the temperatures back up again, any advice from owners of the 890gxm would be helpful as the BIOS layout is confusing, treat me as a COMPLETE noob please
thanks
i have an athlon ii x4 630 with stock cooler,a msi890gxm g65 mobo and an msi 5770 graphics card
after checking hw monitor and coretemp my idle temps show as much as 65 degrees!!! after finding out that its supposed to idle at around 25 degrees, i changed the vcore to 1.35v and the NB voltage to 1.15 instead of putting them on auto hoping that it would fix the problem but it hasn't helped
my case has a 120mm intake fan in front and a 140mm exhaust on top, and the cables are routed to ensure max airflow, the CPU even runs at STOCK speed, how can i get it to operate at proper temperatures
once i get that done i want to know how to get a modest 3.0 ghz overclock on the stock cooler with stock volts so i dont get the temperatures back up again, any advice from owners of the 890gxm would be helpful as the BIOS layout is confusing, treat me as a COMPLETE noob please
thanks
Attachments
Last edited: