Results 1 to 5 of 5
03-08-12, 09:59 AM #1
Arctic Freezer 13 Pro CO Heatsink Review
Today, I will be taking a look at my second cooler from Arctic. This one is named the Freezer 13 Pro CO and it looks to be a higher performance offering than the last cooler I reviewed from Arctic, the Freezer 13. I found the Freezer 13 to be a mediocre cooler as far as overclocking is concerned. While it was able to cool my test system at 4 GHz, it was marginal at best for cooling my test system at that overclock. Today we will see if this offering can improve on that performance.
... Return to article to continue reading.
03-14-12, 09:04 AM #2
Good in-depth review as always!Haswell Benching and Gaming: ASRock Z87 OC Formula : Intel i7 4770k w/ Phanteks PH-TC14 : 16GB 4x4GB G.Skill TridentX DDR3-2666 : 2x R9 290X
Other Components: Samsung 840 Evo 500GB SSD : 2TB Hitachi 7200rpm : Seasonic Platinum 1000W : Auria EQ276W 2560x1440, Crossover P27Q 2560x1440, Dell 2407WFP 1920x1200
03-14-12, 12:27 PM #3
03-15-12, 10:50 PM #4
Meh. Good word for AC heatsinks.
OTOH, their F PWM fan did very well on my D14 testbed. Is that the fan they used on their heatsinks?Fan comparison: 65 Fans Tested on a Megahalems
Good Cases for Air Cooling
Core i7 4770K @4.3GHz + HD 4600 w/1GB system RAM | GA-Z87X-UD4H f7
Armageddon w/two NF-A15's | 2x4GB Crucial Ballistix @1600MHz
Samsung 840 Pro 512GB | Seagate Barracuda 7200.12 1TB file disk | WD Red 3TB backup
CM N600 1x GT - AP12 + 1xNF-P12+ULNF front, TY-140 top intake, NF-S12A mid-case, PWM frankenfan side intake
03-16-12, 09:53 AM #5
The motor and bearing package, as well as the rotor assembly might be the same, but it is integrated into the shroud. And I find that unfortunate, since you can't try different fans on the heatsink itself because of the fan being made into the shroud, unless you want to do some significant mods so that you could mount directly to the heatsink or make your own custom shroud.