I'm new to this forum and would first like to say Hi to everyone. I'm in the process of completing my first custom loop. I'd been using the Corsair H100 cpu cooler and it's done a good job of keeping my i5 2500K cool OC'd @ 4.3Ghz but now I'd like to water cool my GPU's also. I have GTX 480's SLI at stock speeds with dual monitors and my cards idle in the 40's and under load in the 70's.
I've acquired a number of parts and I'm really close to completion but I'm still not decided if I want to do a dual or a single loop.
My Specs are:
Corsair 800d
Asus P8Z68-V Pro
Intel i5 2500K
Corsair Vengeance 1600 Mhz 4 X 4Gbs
SeaSonic Platinium 1000 PSU
GTX 480 SLI
Corsair Force 3 120Gb SSD
Samsung Spinpoint F3 1 Tb HDD
Corsair H100
My Parts list to date:
Scythe Kaze Master Pro Fan Controller
Koolance RP-452X2 Reservoir
XSPC Raystorrm CPU Block
Laing D5 pumps X 2
TFC X-Changer 360mm Rad
TFC X-Changer 120mm Rad (These are some really thick Rads)
Black Ice GTX 140mm Rad
Scythe S-Flex fans X 3
Yate Loon 140mm Med Speed Fan
Yate Loon 120mm High Speed Fan
I need compression fittings, tubing and a few odds and ends. I'd like to know it is true you can run 3 fans on one channel with the Kaze Pro. I'd like to run the 3 Scythe fans on the 360 Rad off one channel at the same speed if thats possible.
I've acquired a number of parts and I'm really close to completion but I'm still not decided if I want to do a dual or a single loop.
My Specs are:
Corsair 800d
Asus P8Z68-V Pro
Intel i5 2500K
Corsair Vengeance 1600 Mhz 4 X 4Gbs
SeaSonic Platinium 1000 PSU
GTX 480 SLI
Corsair Force 3 120Gb SSD
Samsung Spinpoint F3 1 Tb HDD
Corsair H100
My Parts list to date:
Scythe Kaze Master Pro Fan Controller
Koolance RP-452X2 Reservoir
XSPC Raystorrm CPU Block
Laing D5 pumps X 2
TFC X-Changer 360mm Rad
TFC X-Changer 120mm Rad (These are some really thick Rads)
Black Ice GTX 140mm Rad
Scythe S-Flex fans X 3
Yate Loon 140mm Med Speed Fan
Yate Loon 120mm High Speed Fan
I need compression fittings, tubing and a few odds and ends. I'd like to know it is true you can run 3 fans on one channel with the Kaze Pro. I'd like to run the 3 Scythe fans on the 360 Rad off one channel at the same speed if thats possible.