Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 21 to 40 of 49
  1. #21
    Member King107s's Avatar
    Join Date
    Oct 2008
    Location
    Florida
    Heatware Profile
    Return both cards to stock settings and test them out individually. Do a fresh install of the ATI CCC drivers for each test. Run the single cards in both slots on 3DMark11 and see what happens. If both cards work in both slots put both of them back in and enable crossfire again and test again. If that works as well, then I'd say your overclock was the problem.
    CPU Intel Core i7-2600K @ 4.9 GHz on H2O
    MB ASRock Z77 Extreme9
    RAM G.SKILL Ripjaws X Series 16GB (4 x 4GB) DDR3 2133 9-11-10-28
    VC Sapphire Dual-X OC 7970 3GB 1050/1500 (3DMark11 P10551)
    SSD Samsung 840 Pro 256GB
    HDD RAID0 2x1TB Seagate Barracuda 7200.12
    PSU Corsair AX1200
    Case Corsair Carbide Air 540 w/ Aerocool Shark Black ed. fans
    Cooling EK Supreme HF Rev 2 block, Swiftech MCR320-XP eXtreme Performance Triple 120mm Slim Radiator, AFC1212D-PWM Fans, EK D5 X-RES Top 100 Res, Swiftech MCP655-B, Prolimatech PK-1 TIM, PrimoChill Liquid Utopia, 1/2" x 3/4"PrimoFlex PRO LRT Tubing UV Blue

  2. #22
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    I have had them at stock clocks. I'll have to try another fresh install of CCC when I get off work. I'd really like to know why I got a BSOD on my last install.

    Edit: Just got done with a whole new fresh install of windows and I kind of still have the same problem. I can actually login now. Although, as soon as I open something I get a black screen, but the monitor stays awake.
    Last edited by Cojac92; 04-19-12 at 07:05 PM.

  3. #23
    Member King107s's Avatar
    Join Date
    Oct 2008
    Location
    Florida
    Heatware Profile
    You need to test the cards out separately in both slots.

    List out your hardware and the settings you are running please. Especially your power supply.
    CPU Intel Core i7-2600K @ 4.9 GHz on H2O
    MB ASRock Z77 Extreme9
    RAM G.SKILL Ripjaws X Series 16GB (4 x 4GB) DDR3 2133 9-11-10-28
    VC Sapphire Dual-X OC 7970 3GB 1050/1500 (3DMark11 P10551)
    SSD Samsung 840 Pro 256GB
    HDD RAID0 2x1TB Seagate Barracuda 7200.12
    PSU Corsair AX1200
    Case Corsair Carbide Air 540 w/ Aerocool Shark Black ed. fans
    Cooling EK Supreme HF Rev 2 block, Swiftech MCR320-XP eXtreme Performance Triple 120mm Slim Radiator, AFC1212D-PWM Fans, EK D5 X-RES Top 100 Res, Swiftech MCP655-B, Prolimatech PK-1 TIM, PrimoChill Liquid Utopia, 1/2" x 3/4"PrimoFlex PRO LRT Tubing UV Blue

  4. #24
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    Quote Originally Posted by King107s View Post
    You need to test the cards out separately in both slots.


    List out your hardware and the settings you are running please. Especially your power supply.
    Already tried different cards in different slots. Any time I make a change like that, I get a driver error as soon as I load my desktop. Then I get an alert to restart my computer, after I restart it's fine. It's just when I run both of them together.

    All my hardware is in my signature, I'm not sure what happened to it in my last post.

    Edit: Also tried a another bridge last night... Nothing.
    Last edited by Cojac92; 04-21-12 at 12:51 PM.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  5. #25
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    Ok, after even more swapping and moving, and testing. I think the problem seeds from my old card. I searched the card over for broken/burnt solder joints, I even took the cooler back off of it to search under there. I have no dang idea why my old card would be the one giving me problems. It has ran fine for a over a year, and it even worked fine for the first hour of crossfire.

    Getting some more people in this particular thread would be nice.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  6. #26
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    385 views, and only 4-5 people have something to add.

    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  7. #27
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    I just tried the card in another system, everything was good until I installed CCC. After I installed the drivers I am able to sit in bios all day, but as soon as windows loads I get a black screen with my screen still awake.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  8. #28
    Member pwnmachine's Avatar
    Join Date
    Nov 2009
    Location
    Alberta, Canada
    Did you do a 100% clean install using Driver Sweeper?

    A lot of times the simplest things can cause instability, I suggest sweeping all video related drivers(safe mode) and reinstalling latest drivers(safe mode).

    I had a similar issue and a clean install fixed everything
    i5 2500k @ 4.8 gHz. 1.3v..................Q9650 @ 4.0 gHz.
    Kingston Hyper 1600mHz 4gb..........XMS3 1600mHz 4gb
    Asus P8P67 Pro B3...........................790i Ultra FTW
    XFX 5970 BE + XFX 5850..................GTX 260 2xSLI
    CM Hyper 212/Thermalright HR-03...Scythe Mugen II
    CM Cosmos S Modified......................NZXT H2
    Custom Maple Gaming Case

  9. #29
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    Alright, I uninstalled my drivers via driver sweeper. That caused my next CCC installation to have an error. Did that twice in a row. Then I uninstalled CCC via control panel & drive sweeper... In that order. Also removed Net framework, and all my Microsoft visual packs, and reinstalled CCC. Installation went without a hitch, rebooted... "Starting Windows" froze. So I did a hard reset, and it loaded into windows fine after that. About 15 sec after being in my desktop I got these errors.





    Edit: You asked about a clean driver install... I did a whole fresh win7 install a day or two ago, just trying to resolve this issue.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  10. #30
    Member pwnmachine's Avatar
    Join Date
    Nov 2009
    Location
    Alberta, Canada
    Did you do this in safe mode? You need to be in safe mode for it to work properly.
    i5 2500k @ 4.8 gHz. 1.3v..................Q9650 @ 4.0 gHz.
    Kingston Hyper 1600mHz 4gb..........XMS3 1600mHz 4gb
    Asus P8P67 Pro B3...........................790i Ultra FTW
    XFX 5970 BE + XFX 5850..................GTX 260 2xSLI
    CM Hyper 212/Thermalright HR-03...Scythe Mugen II
    CM Cosmos S Modified......................NZXT H2
    Custom Maple Gaming Case

  11. #31
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    Quote Originally Posted by pwnmachine View Post
    Did you do this in safe mode? You need to be in safe mode for it to work properly.
    Clean the drivers? Install them? Or both?
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  12. #32
    Member pwnmachine's Avatar
    Join Date
    Nov 2009
    Location
    Alberta, Canada
    Quote Originally Posted by Cojac92 View Post
    Clean the drivers? Install them? Or both?
    Both. It's best to install them in safe mode otherwise windows will try to install the drivers itself which is what gives you the errors you see.

    You should repeat the process.

    -Boot safe mode
    -sweep all video drivers
    -restart
    -boot into safe mode(make sure you have latest drivers downloaded)
    -install new drivers
    -boot normally

    Hopefully that works
    i5 2500k @ 4.8 gHz. 1.3v..................Q9650 @ 4.0 gHz.
    Kingston Hyper 1600mHz 4gb..........XMS3 1600mHz 4gb
    Asus P8P67 Pro B3...........................790i Ultra FTW
    XFX 5970 BE + XFX 5850..................GTX 260 2xSLI
    CM Hyper 212/Thermalright HR-03...Scythe Mugen II
    CM Cosmos S Modified......................NZXT H2
    Custom Maple Gaming Case

  13. #33
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    Ok, going to do it right after this post.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  14. #34
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    I am unable to figure out how to get into safe mode with this new motherboard. F8, or F12 didn't work. I didn't see anything in the manual or bios that was relevant either.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  15. #35
    Member pwnmachine's Avatar
    Join Date
    Nov 2009
    Location
    Alberta, Canada
    Quote Originally Posted by Cojac92 View Post
    I am unable to figure out how to get into safe mode with this new motherboard. F8, or F12 didn't work. I didn't see anything in the manual or bios that was relevant either.
    I'm pretty sure it's F8, right after you see the mobo splash screen tap F8 repeatedly.
    i5 2500k @ 4.8 gHz. 1.3v..................Q9650 @ 4.0 gHz.
    Kingston Hyper 1600mHz 4gb..........XMS3 1600mHz 4gb
    Asus P8P67 Pro B3...........................790i Ultra FTW
    XFX 5970 BE + XFX 5850..................GTX 260 2xSLI
    CM Hyper 212/Thermalright HR-03...Scythe Mugen II
    CM Cosmos S Modified......................NZXT H2
    Custom Maple Gaming Case

  16. #36
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    F8 just gives me my boot menu. There isn't anything on my splash screen telling me my different options either.

    Edit: Never mind, I found it in my manual. It was in a freaking footnote with tiny print. It's F5 for my board.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  17. #37
    Member pwnmachine's Avatar
    Join Date
    Nov 2009
    Location
    Alberta, Canada
    lol F5 really? Never heard of that before...
    i5 2500k @ 4.8 gHz. 1.3v..................Q9650 @ 4.0 gHz.
    Kingston Hyper 1600mHz 4gb..........XMS3 1600mHz 4gb
    Asus P8P67 Pro B3...........................790i Ultra FTW
    XFX 5970 BE + XFX 5850..................GTX 260 2xSLI
    CM Hyper 212/Thermalright HR-03...Scythe Mugen II
    CM Cosmos S Modified......................NZXT H2
    Custom Maple Gaming Case

  18. #38
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    Quote Originally Posted by pwnmachine View Post
    lol F5 really? Never heard of that before...
    Yeah it's really F5... Still didn't work for me though. I had to enter safe mode via changing my settings in msconfig. Although, once I was in safe mode. I was unable to uninstall my drivers. It said "The windows installer service is unavailable in safe mode."
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

  19. #39
    Member pwnmachine's Avatar
    Join Date
    Nov 2009
    Location
    Alberta, Canada
    Quote Originally Posted by Cojac92 View Post
    Yeah it's really F5... Still didn't work for me though. I had to enter safe mode via changing my settings in msconfig. Although, once I was in safe mode. I was unable to uninstall my drivers. It said "The windows installer service is unavailable in safe mode."
    Don't uninstall them using the .exe simply wipe them using DriverSweeper.
    i5 2500k @ 4.8 gHz. 1.3v..................Q9650 @ 4.0 gHz.
    Kingston Hyper 1600mHz 4gb..........XMS3 1600mHz 4gb
    Asus P8P67 Pro B3...........................790i Ultra FTW
    XFX 5970 BE + XFX 5850..................GTX 260 2xSLI
    CM Hyper 212/Thermalright HR-03...Scythe Mugen II
    CM Cosmos S Modified......................NZXT H2
    Custom Maple Gaming Case

  20. #40
    Cojac92's Avatar
    Join Date
    Jun 2011
    Location
    South Carolina
    Benching Profile
    I get an error after uninstalling my driver with driver sweeper and then trying to reinstall it. (in safe mode) During the CCC installation, I get a "Failed to load detection driver" error that aborts the installation.
    CPU: i7-2700k @ 5.0GHz
    Motherboard: ASUS P8Z68-V GEN3
    RAM: Mushkin Redline DDR3 1600 | 6-8-6-24 8GB.
    Video Card: Sapphire 7970 OC - Dual X
    Case: Corsair 650D
    PSU: Corsair TX850w.
    Boot: 2 x OCZ Vertex 4 128GB in RAID 0.

    3x ASUS 21.5" LED IPS panels in Eyefinity @ 6024x1080

    My water cooling loop, Dangerden M6 1155 block, Dangerden 800lph pump, XSPC bay reservoir, and a Black Ice Pro II 240 Radiator.

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •