- Joined
- Nov 7, 2004
I am going to be installing this tommorow the pipes will be in a bendy way as my CPU position on my board is quite closer to the top left of the board not far off the rear exhaust and PSU.
My current set-up is a 120mm fan as an exhaust alone with the 120mm fan in the PSU above the CPU (not sure if thats pulling or pushing air out) and a 80mm side intake fan both run around 1300rpm.
Which way would be best to set the fans as an exhaust with both front and back of radiator or just 1 at the front only.
Or both as intakes or 1 would it best to play around with the format a little
My current set-up is a 120mm fan as an exhaust alone with the 120mm fan in the PSU above the CPU (not sure if thats pulling or pushing air out) and a 80mm side intake fan both run around 1300rpm.
Which way would be best to set the fans as an exhaust with both front and back of radiator or just 1 at the front only.
Or both as intakes or 1 would it best to play around with the format a little