• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Help with WDS/wireless around a corner challenge

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

JCLW

Member
Joined
Apr 1, 2002
Anyone have experience with WDS setups?

At work the IT dept is looking to wrap wi-fi coverage around the corner of a building.


Code:
     (2) - Post for                                                 (1) - Internet
           repeater                                                        here

                           -------------------------------------------------------
                          |
                          |
                          |
              (*) - tree  |          Steel/concrete building
                          |
                          |
                          |
                          |
                          |
                          |
              (*) - tree  |
                          |
                          |
                          |
                          |
                          |
                          |
              (*) - tree  |
                          |
                          |
                          |
                          |
                          |
                          |
              (*) - tree  |
                          |
                          |
                  (3) - wifi required
                        here

Antenna at (1) will be ~3m (10') high.

Antenna at (2) will be ~6m (20') high.

Distance from (1) to (2) is about 75m (225') with a 100% clear line of sight

Distance from (2) to (3) is about 100m (300') with a few small trees in the way

Would dual radio repeaters be ideal in this situation?

We were looking at the Engenius EOR 7550.

Our thought was to place one at (1) and one at (2). In both locations radio one (600mw B/G) would be set up with a 9db gain omni directional antenna as an access point to provide wifi access for devices. Radio two (lower power B/G/N) on both devices would be setup to provide a dedicated WDS bridge for backhaul.

Anyone have any experience or thoughts?

Anyone played with dual radio devices before?
 
Anyone have experience with WDS setups?

At work the IT dept is looking to wrap wi-fi coverage around the corner of a building.


Code:
     (2) - Post for                                                 (1) - Internet
           repeater                                                        here

                           -------------------------------------------------------
                          |
                          |
                          |
              (*) - tree  |          Steel/concrete building
                          |
                          |
                          |
                          |
                          |
                          |
              (*) - tree  |
                          |
                          |
                          |
                          |
                          |
                          |
              (*) - tree  |
                          |
                          |
                          |
                          |
                          |
                          |
              (*) - tree  |
                          |
                          |
                  (3) - wifi required
                        here

Antenna at (1) will be ~3m (10') high.

Antenna at (2) will be ~6m (20') high.

Distance from (1) to (2) is about 75m (225') with a 100% clear line of sight

Distance from (2) to (3) is about 100m (300') with a few small trees in the way

Would dual radio repeaters be ideal in this situation?

We were looking at the Engenius EOR 7550.

Our thought was to place one at (1) and one at (2). In both locations radio one (600mw B/G) would be set up with a 9db gain omni directional antenna as an access point to provide wifi access for devices. Radio two (lower power B/G/N) on both devices would be setup to provide a dedicated WDS bridge for backhaul.

Anyone have any experience or thoughts?

Anyone played with dual radio devices before?


are you looking to keep wireless at pole 2 & throughout areas 1 and 3?


only reason i ask is because you can use line of sight antenna's (AkA Cantenna's) if you just need to hop from Ap to there.
 
Need Wifi at 1.

Don't really need wifi from 2, as existing wifi from 1 reaches.

Just need to get it around the corner.
 
Back