Results 1 to 7 of 7
  1. #1
    New Member
    Join Date
    Jun 2012

    i7 930 Heating overclocking Problem.

    As you all know I'm new to OC and having some heating problem.

    My setttings:
    CPU Ratio: 21
    BCLK: 167
    CPU Voltage: 1.12
    Ram Voltage: 1.64 @ 1678 MHz

    My specs:
    650w Corsair
    ASUS Sabertooth X58 LGA 1366
    i7 930 @ 2.8ghz
    18gb of Gskill @ 1600 Mhz 9-9-9-24 1.5V

    Running stock fan. I just want a slight OC for this i7 to around 3.4ghz-3.5ghz.

    I ran prime95 and it keeps exceeding 80 C so I stop the test fearing it might heat up too much. What am I doing wrong? Thanks in advance for any advice and tips.
    Last edited by khoi420; 06-10-12 at 01:21 AM.

  2. #2
    Member
    Join Date
    Nov 2010
    It's a warm chip by it's nature compared to a 32nm SB and that's a decent OC, ditch the stock cooler junk and grab a h80 if you can or a coolermaster evo 212 if you don't want water.

    I don't think 80C is bad for that OC, your voltage is excellent too if it's stable at 80. You can get up to about 90C and be okay with that chip, especially with excellent low voltage like that.

    24/7 PC
    CPU: i7 950 d0 @ stock (v)
    QPI: stock
    RAM: OCZ DDR3 2000 2GB x 6 @ 1333 Mhz
    Cooling: Corsair H50
    Mobo: Asus Rampage III Formula
    GPU: AMD RX 470
    Case: Corsair 700D
    PSU: Corsair HX850

  3. #3
    New Member
    Join Date
    Jun 2012
    So should I continue to let prime95 run? Because I read on some OC guides and they say if prime95 exceeds 80C means I'm doing something wrong.

  4. #4
    Member
    Join Date
    Nov 2010
    Yeah those are guides for proper cooling solutions I would assume, your cooling solution isn't great for OCing. 80C is an ideal goal for Prime 95 temps after half an hour.

    I don't know how fast you're getting to 80C. If it's within 5 minutes then your cooler is probably saturated and won't be able to dissapate heat faster then it's coming in. If you're running it for an hour though and averaging around 80C then that is reasonable and not bad at all for that cooler.

    24/7 PC
    CPU: i7 950 d0 @ stock (v)
    QPI: stock
    RAM: OCZ DDR3 2000 2GB x 6 @ 1333 Mhz
    Cooling: Corsair H50
    Mobo: Asus Rampage III Formula
    GPU: AMD RX 470
    Case: Corsair 700D
    PSU: Corsair HX850

  5. #5

    Join Date
    Apr 2011
    Location
    Mickleton NJ
    I had a 930 and ran it at 3.5ghz, REPLACE THAT STOCK CRAP COOLER. A hyper 212 Evo would drop 10c easy. The volt you are at is actually good, 90c i would be worried, but 80c is not to bad. I wouldnt want to go much over, but if your hitting 80c with a stock cooler swapping that out to a Hyper 212 evo would help a lot.

    Remember Prim95 is going to put a load on the CPU that 99% of us out there will never be able to duplicate outside of stress testing.
    Mobo Asus H170 Pro Gaming
    CPU i5-6600k
    CPU HS/F Corsair H-100
    RAM Corsair Veng 16gig DDr4-3200
    GPU EVGA 760 SC Acx
    Storage Samsung 850 Pro 256gig
    Storage 2tb HDD
    DVD Samsung BD/DVD/CD
    Inputs Logitech G510S and G700S
    Sound Sb X-Fi titanium , Monster Game MVP
    My Heatware

  6. #6
    New Member
    Join Date
    Jun 2012
    Thanks for the advice. I will seek out for a heatsink to solve this problem.
    Also my stock RAM Speed is 1600 mhz, is it ok for me to set the speed to the closest stock speed even if it goes a bit over?

  7. #7
    Member
    Join Date
    Nov 2010
    Yeah that should be okay. Run memtest86 (boots from a CD) to be sure your ram is functioning properly. You may even be able to tighten the timings on that ram, first thing's first make sure the command rate is set to 1T/N.

    24/7 PC
    CPU: i7 950 d0 @ stock (v)
    QPI: stock
    RAM: OCZ DDR3 2000 2GB x 6 @ 1333 Mhz
    Cooling: Corsair H50
    Mobo: Asus Rampage III Formula
    GPU: AMD RX 470
    Case: Corsair 700D
    PSU: Corsair HX850

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •