Results 1 to 6 of 6
  1. #1
    New Member
    Join Date
    Jul 2012
    Posts
    3

    Need Assistance If Possible Please.

    i just got a x7dca-l with two e5405 processors ive tried to get setfsb to change the clock speed but with no avail is there something im doing wrong maybe? is there a flash anyone knows of to unlock the pll? im lost since i dont think i can do a tape mod on this board because it doesnt suppot 1600 fsb

  2. #2
    Overclockers Team Content Editor
    Shelnutt2's Avatar
    Join Date
    Jun 2005
    Location
    /home/
    Posts
    5,914
    According to XS the only thing to do is pin mod the cpus.
    Build!.Borg!.Recruit!.Folding.for.Team.32!
    Gigabyte P35-DS3R, E6300, 2x512MB Team Group DDR2 667, EVGA 7800GT Heat

    Want to run the folding@home gpu client in linux?
    www.linuxfah.info

    Your teacher is a dumbass. The equation is exact. ~Frodo Baggins
    Damn....It's 12:00 AM and I thought my 805 would be a magic pumkin and turn into a conroe.........boy was I fooled:) ~Stilletto
    This is what I get for not only being a newb, but also disregarding instructions! ~ShadowPho
    I hate women... but im not gay lol. ~MrCrowley
    Love can fade but knowledge stays forever (unless you develop alzheimers). ~Constantinos

  3. #3
    New Member
    Join Date
    Jul 2012
    Posts
    3
    Quote Originally Posted by Shelnutt2 View Post
    According to XS the only thing to do is pin mod the cpus.
    but that mobo doesnt suppot 1600fsb itll crap out

  4. #4
    Overclockers Team Content Editor
    Shelnutt2's Avatar
    Join Date
    Jun 2005
    Location
    /home/
    Posts
    5,914
    Quote Originally Posted by PoisonXA View Post
    but that mobo doesnt suppot 1600fsb itll crap out
    Only one way to find out if it can support it, or if it won't boot.

    http://www.xtremesystems.org/forums/...-mod-Xeon-54xx!

    Worst case just take the tape off the pins.

    I don't find any other way to overclock the board besides pin mod.
    Build!.Borg!.Recruit!.Folding.for.Team.32!
    Gigabyte P35-DS3R, E6300, 2x512MB Team Group DDR2 667, EVGA 7800GT Heat

    Want to run the folding@home gpu client in linux?
    www.linuxfah.info

    Your teacher is a dumbass. The equation is exact. ~Frodo Baggins
    Damn....It's 12:00 AM and I thought my 805 would be a magic pumkin and turn into a conroe.........boy was I fooled:) ~Stilletto
    This is what I get for not only being a newb, but also disregarding instructions! ~ShadowPho
    I hate women... but im not gay lol. ~MrCrowley
    Love can fade but knowledge stays forever (unless you develop alzheimers). ~Constantinos

  5. #5
    New Member
    Join Date
    Jul 2012
    Posts
    3
    i know i have a x7dcu that ive taken to 1589 almost 1600 but ive heard some boards can go over it all depends on ur luck so ill see ~

  6. #6
    Senior Member DaveB's Avatar
    Join Date
    Dec 2000
    Location
    Gainesville, VA
    Posts
    1,499
    Back in 2008 I built a nice little 8-core setup around Supermicro X7DCA-L Micro ATX in a Lian Li PC-V350B SFF Cube Case. I used a pair of quad core E5340 ES 1066 FSB Clovertowns, tape modded to 3 GHz @ 1333 FSB with 12GB (6 x 2GB) DDR2-667 Reg/ECC RAM. The video card was an eVGA 9800 GX2 1GB Dual GPU which just fit in thal Lian Li cube case. The Lian Li came with dual 120mm inlet fans at the front which were right next to the Xeons, providing fresh cool air for the HS/Fans. A couple of slot coolers cleared out any heat from either side of the 9800 GX2 although it did have a fan between the two cards that exhausts heat out the back also. The power supply was an Antec Earth Watts 650W which did a nice job of powering everything nice and stable.
    1. Thermaltake V9 BlacX Case, Gigabyte X99-UD4, i7 5820K, 16GB Crucial DDR4 2133, Intel 80GB SSD, HD 7850 Video
    2. Acer AS5750-9422, 15.6", Core i7-2670QM Laptop, 4GB DDR3-1333, HD 3000 Graphic
    3. Old Antec Case, Asus PC-DL, 2 x 1.6 LV D1 Xeons @ 3 GHz, 2GB Corsair PC3200 (4x512MB) @ 200 MHz, Chaintech 6800 128MB AGP Video [/FONT]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •