Results 1 to 5 of 5
Thread: CPU Heat
07-15-12, 10:44 PM #1
- Join Date
- Jul 2012
New to PC building and just built a new computer for the first time any suggestions on how to lower the temp on my CPU? And which would be the better of the two to use an after market heat sink or a water cooled setup? Any suggestions would help thanks my PC build specs
Case: Thermaltake Chaser MK-I
MB: Asus Sabbertooth 990 FX AM3+ AMD
CPU: AMD FX-8150 FX 8-Core Black Edition AM3+
RAM: Corsair Vengence DDR3 1866 MHZ 16GB (2X8GB)
GPU: EVGA Geforce GTX680 2 GB GDDR5
PSU: Corsair HX Professional Series 850w
SSD: Corsair Force GT 180GB SATA III
HDD: Seagate Barracuda 2TB 64MB Cache 7200RPM
Drive: Asus blue ray drive
07-15-12, 10:57 PM #2
Heatsink are easy, buy it, install it, done.
With water cooling, it takes a lot more research and planning. However, you can make it cool however well you want and be as quiet as you want it, you're only limited by how much you can spend.
07-15-12, 11:35 PM #3
It depends on the particular air cooler and the particular water system. There is a common misconception out there that any water cooling kit will out perform all air coolers. Not so! And it may depend on your budget. The Corsair H100, probably the best self-contained ready to go out of the box water kit is a little over $100 US and a lot of people are going that way with the FX 8xxx CPUs. The only air cooler I would recommend for that CPU as being adequate for some overclocking is the Noctua D14 for under $90 US. Neither would be problematic as far as installation in your case.
One piece of information you did not include in your Sig or in your post is the CPU cooler you are currently using. Shall we assume you are using the stock boxed cooler that came with the CPU?
Last edited by trents; 07-15-12 at 11:41 PM.CPU: i7 firstname.lastname@example.org ghz
Motherboard: Asus P8P67 Deluxe b3
Cooler: Swiftech H320
RAM: 16 (4x4) gb Team Group Vulcan 2400 mhz @ 2176 mhz / 11-13-13-35-2T
GPU: Sapphire Radeon R9 280X
Case: NZXT Source 530
PSU: OCZ 750W
Storage: Segate 480 gb SSD + 2x300 gb WD Velociraptors
Jesus said, "I am the way and the truth and the life. No one comes to the Father but through me". John 14:6
07-15-12, 11:46 PM #4
- Join Date
- Jul 2012
Yes I'm using the stock cpu cooler
07-16-12, 01:45 AM #5
The Corsair H100 = However those that have "reallly" pushed an 8 core FX processor have found the H100 not enough. NOT when really pushed. I do think that the H100 in well cooled environment would handle 4.4Ghz without much drama. After that and depending on how you setup the H100, it could make you wish you had gone another route and had that $100 to go against another route.
One other note to remember is that when you have n0 air cooled cpu HSF in the case, you have g0t to make sure you have air going toward the VRM sinks since going water removes the air that spilled there from the fan powered cpu cooler.You May Need Help = We Need Info to Help.
MOBO > Model and Bios version.
CPU & Cooler > Be Specific.
MEMORY > Manufacturer & P/N & Size.
POWER SUPPLY > Manufacturer & Wattage.
VIDEO CARD > Make/Model/How Many.
HDDs/Optical drives > How Many? SSD? Raid/No Raid?
SOUND DEVICE > Onboard or Add-in?
USB > Usb Devices Plugged to Mobo?
O/S > Win? SP? Linux?
Case > Brand/Model/Fans Installed?
Institute of Level Headed Over Clockers