I've never tried solid core wiring for speaker wire, don't know if you would have a prob with interference, if I had a choice I'd rather go with a stranded core coaxial.
in that case i think i'll get some thick multi-strand, but before i do would having more current be better for quality or volume? would there be an advantage to one big thick wire? if so what?
More current is better for quality as well as volume. The more current getting to a speaker makes it so you can play it louder obviously, but it also makes a more reliable power source so when you are playing it loud it won't destort. The best example I can think of is with a subwoofer in a car. If you have an amp that doesn't supply all the power the bus demands at a certain volume then the sub will start to distort because it isn't getting reliable enough power sent to it.
I've heard of people using that thick (usually orange) extension cord stuff found at hardware stores for long speaker wire runs. i dont know if thats what you had in mind but its something to look into.
you can use whatever kind of wire you want for speaker wire pretty much.
For a while I was using 2awg power cable from my amp to my subs, it was all I had. Didn't sound too good but worked fine.
Big thick wire for speakers is only good up to a certain point, past there the internal resistance of the wire itself starts to mess with you. Electrically, its fine, but acoustically it ain't too good.
If you need to do a long run (100 foot +) go to a good stereo place, they will have tons of advice to give you. They have special types of cable for really long runs. If you are over 250 foot you get to use those cool +17v convertors
you can use house hold wires.. you just have to make sure that the wires inside are stranded and not 1 whole piece...I use them as extensions to put my Creative LAbs DTT3500 around the top corners of my room.
thanx all here is what i finaly got. Went down to the local HW store and got some 50Feet of 99.9% pure copper speaker wire that is 99.9% oxygen free. sounds great with gold solder on all the connects
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.