Is that build in ??? Celeron 1300

Rio71

Member

​

Joined

Feb 2, 2002

Location

Karlsruhe, Germany

• Mar 14, 2002

• #1

Hello,
that is my first Posting here... (however not Reply)
I has the following problem:
- different Tools shows me: that max. PCU SPEED are 1600 MHz
- that is also the highest PCU SPEED those stably run to let can
- an increase the v-core and the Vi/o do not have an effect (or only very small)
- is that build in ?
- as is with you? ( other Board`s/CPU )

 

Last edited: Mar 14, 2002

OP

Rio71

Member

​

Joined

Feb 2, 2002

Location

Karlsruhe, Germany

• Mar 14, 2002

• Thread Starter
• #2

...

 

OP

Rio71

Member

​

Joined

Feb 2, 2002

Location

Karlsruhe, Germany

• Mar 14, 2002

• Thread Starter
• #3

...

 

deez

Member

​

Joined

Jul 9, 2001

Location

Louisville, KY

• Mar 14, 2002

• #4

Its probably just incorrect software readings B/C your not even running at 133FSB which is a default setting for the TUSL-2C. And FSB adjustment goes past 160

Perhaps you need a bios update or try vidpinning your CPU to avoid the cold boot problem to get better performance. Your temps seem to be OK

 

OP

Rio71

Member

​

Joined

Feb 2, 2002

Location

Karlsruhe, Germany

• Mar 14, 2002

• Thread Starter
• #5

thanks,
my Bios is 1011 @Mad www.x86-secrets.com (edited my Sig)
my default V-Core Range 1.500V - 1.800V
Wather-Cooling coming soon, hope this helps by 1.800V ++ (Vidpinning)

 

Last edited: Mar 14, 2002

deez

Member

​

Joined

Jul 9, 2001

Location

Louisville, KY

• Mar 14, 2002

• #6

is your CPU default voltage 1.50? b/c cele 1.0A-1.2A is 1.475

perhaps try an official bios from ASUS and see if that helps at all

 

deez

Member

​

Joined

Jul 9, 2001

Location

Louisville, KY

• Mar 14, 2002

• #7

your right...mine said it too but according to the CPU database people have hit above 1600 on the TUSL-2C 1680 seems to be the highest with a 1.2

 

Last edited: Mar 14, 2002

OP

Rio71

Member

​

Joined

Feb 2, 2002

Location

Karlsruhe, Germany

• Mar 15, 2002

• Thread Starter
• #8

deez said:

is your CPU default voltage 1.50? b/c cele 1.0A-1.2A is 1.475

perhaps try an official bios from ASUS and see if that helps at all

Click to expand...

yes, the default V-core is 1.500V for Cel-T 1300.
the official Bios shows the same V-Core Range
with 1.650V ++ --> to hot --> Thermal Protect --> hanging up
Wather -Cooling is on the Way (Innovatek Flat-Flow)
with vidpinning theoretical go to 1.650V - 1.950V ( i must VID1 and VID0 connected to Vss )
i hope this works ( without grilled )
I poste it, if it works

Links:
http://www.x86-secret.com/articles/tweak/i815twken.htm
http://support.intel.com/support/processors/sspec/icp.htm
http://forum.oc-forums.com/vb/showthread.php?s=&postid=578205&t=4709