- Joined
- Apr 6, 2011
- Location
- Long Island, NY
I haven't overclocked in some time; so I read up on current information and decided to re-overclock my system from stock.
Hardware:
ASUSTeK Computer INC. P8Z68 DELUXE/GEN3
G.Skill 12.0GB Dual-Channel DDR3 @ 800MHz (9-9-9-24)
Intel Core i5 2500K
I'm trying to use this:
Multiplier: 42
BLCK: 100
VCORE: 1.290
BIOS Screenshots:
My P95 HWMonitor/CPU-Z Results:
I'm having these problems:
I'm at a loss for words here why my voltage is varying. I didn't have this issue when I first got the chips years back. Maybe it's just time for a new chip?
Thank you very much,
JKessell
Hardware:
ASUSTeK Computer INC. P8Z68 DELUXE/GEN3
G.Skill 12.0GB Dual-Channel DDR3 @ 800MHz (9-9-9-24)
Intel Core i5 2500K
I'm trying to use this:
Multiplier: 42
BLCK: 100
VCORE: 1.290
BIOS Screenshots:
My P95 HWMonitor/CPU-Z Results:
I'm having these problems:
- My HWMonitor VCORE is showing in two different places and two different values; one VCORE under my Mobo, and one VCORE under my actual CPU are reading different during a P95 test and idle. Which is technically correct?
- Why are my voltages varying if I set it manually to 1.290?
- I'm using an SSD for my build, I left my computer for about 2 hours, came back, the computer was ON, but it would not wake up by me pressing any keys. Any idea what that could be? I know it's not hibernating like the old HDD.
I'm at a loss for words here why my voltage is varying. I didn't have this issue when I first got the chips years back. Maybe it's just time for a new chip?
Thank you very much,
JKessell
Last edited: