MSi H81-p33 mobo and intel G3258 overclocking help

this is what my bois looks like now

i just upped the ratio to 40,the cpu core voltage is auto as you can see.I need help how to overclock further i would like to get around 4.5ghz

If you can give me a starting point like what core voltages to start with and what would be safe for 4.5ghz?I have run intel burn test and says it is stable and ran intel extreme utility stress test and also says it stable.So please help me get a safe overclock and safe temp and voltage.IF you maybe can give steps would really be great.Also must i desable eist?

looked on hwinfo core vid 1.198v.should i start there?

here is my build

MSi H81 P33
4gig ram
two cases fasns
Deepcool gammax 200 cpu cooler
Intel G3258 cpu
Seasonic 520w psu

h81-p33 & g3258 help us all

Hi! which BIOS version on msi h81-p33 (ATX) - (v.1.3 ,1.4, 1.5) and which stepping & batch of g3258 in use ? I have h81-p33 and bios version 1.4 & 1.5 - cpu ratio is locked, retail BOX CPU is stepping C3 , batch is 3418C011.

Hear that OP? So you don't want bios 1.4 or 1.5.

what bios version enable overclock (cpu ratio auto to off) pentium G3258 - 7820v??.zip ? say me please.

Leo_080372 said:

what bios version enable overclock (cpu ratio auto to off) pentium G3258 - 7820v??.zip ? say me please.

Click to expand...

Google can answer that for you.

"Google can answer that for you" . Thanks for your help theocnoob - you are miser, really...

Leo_080372 said:

"Google can answer that for you" . Thanks for your help theocnoob - you are miser, really...

Click to expand...

7817V15.zip is the bios you want.

Now apologize for your unnecessary and rude insult.

BTW you know how I found out it was 7817V15.zip? Google!

Just saying...

I am sorry, but don't wait any apologies
your post misinforms - H81-P33 is not H81M-P33.

bios ver. 7817v15 is for H81M-P33 (mATX) only, and not for ATX H81-P33 (without M). yes or no ? google - shmoogle.

Leo_080372 said:

I am sorry, but don't wait any apologies
your post misinforms - H81-P33 is not H81M-P33.

bios ver. 7817v15 is for H81M-P33 (mATX) only, and not for ATX H81-P33 (without M). yes or no ? google - shmoogle.

Click to expand...

Well if you can google the fact that it's for the wrong board then you can google the correct bios I think. I wasn't rude to you. You were rude to me.

But now... my apologies, and I am very sorry about error post.
bios v. 7820v14 and maybe 7820v15 can enable overclock G3258 @ H81-P33. CPU adjusting ratio: by + & - key without problem. I wish you good luck! Theocnoob. Thank you.

So is it working for you now?