- Joined
- Jun 9, 2013
Takes me 1.35v on the CPU/NB to do 1900 on the ram @ 2600 NB frequency. I can't do 2800+ at all, so you're doing better than I am. Nice chip.
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
FEATURED Marathon SIII: November HWBOT Prime.
- Thread starter Johan45
- Start date
- Joined
- Jan 12, 2012
Thanks, 1866+ and 2600+ is 1.35 Cpu Nb for daily Oc's, don't want anyone to know what I had it at for that run, Thanks Mr Scott!
It's a shame Johans Fx-8350 met an untimely demise, it was a heck of a clocker with sub ambient temps. I believe his Nb Freq would run 2900-3000 Mhz for some benches
AMD can make quite high memory clock for benchmarks but it's almost never fully stable above ~2133. Harder is to set high CPU-NB clock and without it high memory clock is pointless.
My FX8320 also needed something like 1.35V for 2600 CPU-NB for daily stable work and it was almost max clock regardless of voltage. FX8120 was slightly better than the 8320. For benching 2600+ memory clock wasn't an issue but best results were at something like 2400 CL7.
My FX8320 also needed something like 1.35V for 2600 CPU-NB for daily stable work and it was almost max clock regardless of voltage. FX8120 was slightly better than the 8320. For benching 2600+ memory clock wasn't an issue but best results were at something like 2400 CL7.
OP
- Joined
- Dec 19, 2012
- Thread Starter
- #345
My 8350 was OK most benching was 26-2800, it's my 9370 that's the sweetheart there. It'll run 3000 with 1.35 v and I've benched up to 3150+ on water with up to 1.45v. Normal clock of 2600 is 1.25v and pretty stable. Had the 8320 up to 3550 during my last cold session, too bad the CPU just didn't want to go.
Oh yeah, I'll definitely have to give this a shot over the holiday weekend.
Have at er Doc, just don't wait too long. Ends Sunday at midnight EST.
- Joined
- Jan 12, 2012
Is it me or does McCoy in McCoys avatar look like he's hold up a tube of thermal paste.
- Joined
- Sep 7, 2013
Is it me or does McCoy in McCoys avatar look like he's hold up a tube of thermal paste.
Now that you mention it....
- Joined
- Aug 14, 2006
MetalRacer / 4930k / H2O / 7186.12
- Joined
- Aug 14, 2006
Thanks Johan45! I just got my RIVE back from RMA 
and I'm setting it up in my daily driver.
and I'm setting it up in my daily driver.
- Joined
- Apr 12, 2014
Thought I would run this on the grinder while waiting for the turkey to cook
Witchdoctor / 3930k / H2O / 6044.58
Sorry
Witchdoctor / 3930k / H2O / 6044.58
Sorry
Thanks Johan45! I just got my RIVE back from RMA
My RIVE finished in my daily rig too. Too good stuff to sell it for half price.
- Joined
- Aug 30, 2014
Devlos / i5 4690k / water / 6171.28 pps
http://hwbot.org/submission/2684696_
And Happy Thanksgiving to all!
http://hwbot.org/submission/2684696_
And Happy Thanksgiving to all!
Last edited:
- Joined
- Apr 12, 2014
yea, that is pretty on par for those chips.
Works great for a gaming CPU, less than stellar for benching
Works great for a gaming CPU, less than stellar for benching
- Joined
- Jan 12, 2012
So am I.
- Joined
- Aug 14, 2006
Agreed, I just can't see selling it off for cheap. I have a Biostar x79 for backup and I couldn't wait to get it out of my machine.
This was my third RIVE RMA and I've never been denied. This one was a quick turn, they received my board on 11/19 and I got the replacement on 11/26.
Still tuning it in for daily use, this CPU sips the volts.
Similar threads
