- Joined
- Nov 14, 2014
- Location
- Bahrain
Hey guys,
I just ordered the Parvum S2.0 mATX case, I wanted the case to be an air-cooled case but then changed my mind to water-cooling.
The problem is I don't know jack about water-cooling, I know how to build a PC but never bought any water-cooling parts.
I'd appreciate it if someone helps me choose all the parts necessary to build my loop, money is not an issue.
Parts Ordered:
Case: Parvum S2.0
Fans: 2x Corsair AF120 Red LED PWM, 2x Corsair SP120, 3x 80mm Enermax Red
Processor: Intel 4970k
Motherboard: Asus Maximus VII Gene
Ram: G.Skill Trident X 32GB 2400Mhz
GPU: EVGA GTX 980 Classified
Storage: 2x Samsung 840 Evo SSDs
PSU: Corsair AX860i
Sound Card:Creative Labs Sound Blaster Z
Cables: Corsair AXi series red sleeved cables
Cable Management: Ensourced 3D printed wire wraps
Please note that the case is Black/Red, (like the picture below), so all watercooling parts need to be black matte and red. (Im doing an ROG project)
Combo pump/res is preferable
I just ordered the Parvum S2.0 mATX case, I wanted the case to be an air-cooled case but then changed my mind to water-cooling.
The problem is I don't know jack about water-cooling, I know how to build a PC but never bought any water-cooling parts.
I'd appreciate it if someone helps me choose all the parts necessary to build my loop, money is not an issue.
Parts Ordered:
Case: Parvum S2.0
Fans: 2x Corsair AF120 Red LED PWM, 2x Corsair SP120, 3x 80mm Enermax Red
Processor: Intel 4970k
Motherboard: Asus Maximus VII Gene
Ram: G.Skill Trident X 32GB 2400Mhz
GPU: EVGA GTX 980 Classified
Storage: 2x Samsung 840 Evo SSDs
PSU: Corsair AX860i
Sound Card:Creative Labs Sound Blaster Z
Cables: Corsair AXi series red sleeved cables
Cable Management: Ensourced 3D printed wire wraps
Please note that the case is Black/Red, (like the picture below), so all watercooling parts need to be black matte and red. (Im doing an ROG project)
Combo pump/res is preferable
Last edited: