- Joined
- Dec 23, 2014
- Location
- NSW, Australia
have a bit of a problem. I set all my settings in bios to optimised defaults, ran aida64 for 1hr turns out it was stable at around 40C on load at 3.2Ghz so I went into bios and did this
and set voltages to 1.200 then saved and exited to windows, ran aida64 and cpu z, speccy. While tests where proceeding cpu z and speccy both stated that my cpu was running at 3.2Ghz (originals) but said cpu had vcore of 1.2 volts (like I set) and CPU z and speccy also stated the ratio clock was 32x. I disabled speedstep and left c States on auto. Please help