• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

EVGA GTX 980 classified issues

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
jiccman1965

jiccman1965

Member
​
Joined
Oct 13, 2010
Issue is with the LN2 bios, keep crashing have followed all the direction on the forum for the classified but still crashed driver and windows 7 & 8. any help would be great.
 
1293/1750 I think with voltage 1.21 to 1.275, im on water right now have not touch setting just trying to get it to run. It keep saying display driver failed tried newest on and one older driver.
 
Looks like card is crashing because you hit its max at given voltage/power limit. 1543MHz boost means that real boost is 1600+MHz and for that you need much higher voltage than stock BIOS can provide.
 
+1 to Woomack.
Get that thing on the XOC BIOS and get the Classy Tuner going.
 
That was on the OC bios, Have loaded XOC bios keep crashing every time I load drivers. Have tried the newest and one older driver, followed all the direction the forum for flashing. It took the flash no problem.
Woomack said:
Looks like card is crashing because you hit its max at given voltage/power limit. 1543MHz boost means that real boost is 1600+MHz and for that you need much higher voltage than stock BIOS can provide.
Click to expand...
 
Last edited:
Are you rebooting after the flash? I know my card is different but I found that needed to be done to work correctly.
 
Yes every time, have to do safe mode after to remove drivers again. I think I got a LN2 dud card...
Johan45 said:
Are you rebooting after the flash? I know my card is different but I found that needed to be done to work correctly.
Click to expand...
 
Have you tried putting the XOC BIOS on a switch position that isn't LN2? It may be that there's a bad BIOS chip in there.
 
Well I flash the OC bios with the LN2 bios still did not work, I did back up my bois first went to flash back from the LN2 2988 to the OC 3988 and it said the flash was not new enough. So I go get the most updated flash ad it will not detect the card I think IM hosed here. Not getting feed back from the kingpin forum. But I will keep working on it.
 
Yes I uninstalled all the drivers also did clean install of OS. I also tried yx and xx rom files with the flash he had on KPC site. I have seen a few people with the same issue. Just nned more help from the KPC site or maybe EVGA.
MetalRacer said:
Did you disable the driver or have it uninstalled before you flashed the bios?

Also it looks like there are two different BIOS, have you tried both?

http://overclockingpin.com/HalloweenX/ClassyX.rom

http://overclockingpin.com/classfied980tools/classXX.rom
Click to expand...
 
Yes I uninstalled all the drivers also did clean install of OS. I also tried yx and xx rom files with the flash he had on KPC site. I have seen a few people with the same issue. Just need more help from the KPC site or maybe EVGA.
MetalRacer said:
Did you disable the driver or have it uninstalled before you flashed the bios?

Also it looks like there are two different BIOS, have you tried both?

http://overclockingpin.com/HalloweenX/ClassyX.rom

http://overclockingpin.com/classfied980tools/classXX.rom
Click to expand...
 
You must log in or register to reply here.

Similar threads

C
G-Helper on Asus Prime Z690-P WiFi Desktop?
Replies
9
Views
342
Crash1
C
Voodoo Rufus
Haha! I did it! Win7 on Coffee Lake
Replies
0
Views
183
Voodoo Rufus
Voodoo Rufus
AnEEsO
ZOTAC GTX 1080 TI AMP EXTREME CORE EDITION 139mhz Clock bug after Bios flash
Replies
5
Views
276
Kenrou
Kenrou
spiritedandy
RX 7900 XTX Black screen Mouse freezing in bios . General freezing instability
Replies
9
Views
389
spiritedandy
spiritedandy
J
Trouble Shooting KVM USB Isssue
Replies
11
Views
200
jmh547
J
Back