Is this a good PSU?

satrow said:

Google Translate link to a test review of the 520W version, if it's of any use for comparison or w/e.

Click to expand...

That is what I read yesterday, ATM, when we were talking in chat about it.. its ripple/etc was well under control, but, again, single rail, may be a different OEM... etc.

http://www.ms-tech.de/eng/index.php/product/detail/pdcid/82/pdid/240 official product page, and an english version available too.

Until people can post a review on the ACTUAL PSU IN QUESTION or provide a UL # to check the OEM, this is all pretty meaningless!! The specs are not any more helpful than the already posted testing done...

I posted the link not to replace the review, but if any one wanted to contact the OEM about info. Nothing more.

Say that then...or contact them and find out for the OP...

EDIT: They are likely not the OEM... we are trying to find that out!!! That link doesn't help because it does not contain the UL # to figure out the OEM...

EDIT: Wait, why are we trying to find out if this is a good PSU?
We all know it's not.... Best to just swallow the cost and buy a quality unit.



Parent Ecos ID# is ULTRON AG....
Still not sure who makes it though..

This will be the parent's similar model:
Now to find reviews on it...

hey guys, i installed it on my old pc that has these specs:

-asrock 775 dual VSTA
- 2 x 1 gb kingston ddr2 @ 667Mhz
- Intel core 2 duo Core 2 Duo E6600-Conroe-2.40GHz-1066MHz-4MB
HIS ICEQ -Ati Radeon HD4670 @512Mb DDR5
- 3 HDD
-1 x Scythe Kaze Maru 140 mm @ 1200rpm

and overclocked to 3 GHz ... the Bios was not loading properly
so i down clocked it to 2.7 GHz and it's workin' silently

I will repost when i will buy the better parts that i mentioned earlyer.