[Case Mod] Pinky Silencio

uh, yea, grabbing my popcorn and blaylock and I will enjoy this, I like pink!

Blaylock said:

View attachment 161310

Click to expand...

Love this animation

caddi daddi said:

uh, yea, grabbing my popcorn and blaylock and I will enjoy this, I like pink!

Click to expand...

Thank you so much!

---------------------------------------------

UPDATE

The first thing I started with was the side panel. Draw her resp. to redraw it to the PC was a breeze and the lasercutting came on a few bucks. All my measurement was accurate and fortunately side sits beautifully. I've made a few photos of case without modification



The front part is designed with the door. Behind them we can see directly to fans and slots for mechanics.



The front panel offers, in addition to buttons, USB 2.0 and USB 3.0 ports, a card reader, audio input and output.



Dust filter, which will definitely come in handy a lot!



The case seems quite spacious, but do not know how much will be spacious with water cooling





Mounting Accessories.



And of course a picture with the new sidewall mounted.



This week will pass the cabinet painting on white. Previously it was necessary to partially decompose and remove the slot for the floppy drive and HDD slots.



Here CoolerMaster comforted me how to drive and HDD slots were only mounted on screws, so removal done without greater violence



Photos from the painting I will try to add as soon as possible!

Sub'd

I love the side window. We see so many full tower case mods, it's nice to see a micro tower get modded. They were always my favorite as they take up less space. It's going to be interesting to see how you "find" places to put all the cooling parts.

Blaylock said:

I love the side window. We see so many full tower case mods, it's nice to see a micro tower get modded. They were always my favorite as they take up less space. It's going to be interesting to see how you "find" places to put all the cooling parts.

Click to expand...

Thanks! I love it too because is very small and cute - perfect for girl

-----------------------------------------------

UPDATE

I have some photos from a mobile phone, how was the painting with my good friend. As I wrote earlier - the interior will remain black and white color comes from the outside. When I was in a paint shop, the salesman took me to 120 shades of white Hoping I choosed right

On dismantled case will be painted only the upper part, which is riveted. That's why I had the rest of the case thoroughly covered.



The first color layer





The upper part after the first layer of paint, it looks good ..



Rear panel of the case after two layers - a completely finished and painted As soon as possible I would like to start to mount hardware, and so for three weeks have finished PC. I got an offer to use fittings from one manufacturer, so we'll see if they can speak on something specific.

No sanding?No primer at all?Any kind of preparation?You sure about the outcome?

quadcore said:

No sanding?No primer at all?Any kind of preparation?You sure about the outcome?

Click to expand...

No sanding and no primer bcause it was not necessary. Everything was cleaned and degreased before painting

This looks interesting!

Sub'd, liking where this is going!

Nice pink Crocs your good friend is wearing. Was he getting into the Pink Silencio mood?

Blaylock said:

Nice pink Crocs your good friend is wearing. Was he getting into the Pink Silencio mood?

Click to expand...

I didn't even see those!

That's real comfort, right there
Liking what's going on so far L4mka!

Nebulous said:

This looks interesting!

Click to expand...

Thank you! I love this popcorn smilies

ATMINSIDE said:

Sub'd, liking where this is going!

Click to expand...

Thanks!

Blaylock said:

Nice pink Crocs your good friend is wearing. Was he getting into the Pink Silencio mood?

Click to expand...

Well, if you have pinky project you must have pink everything

ATMINSIDE said:

I didn't even see those!

Click to expand...

Me dont either

SubPar said:

That's real comfort, right there
Liking what's going on so far L4mka!

Click to expand...

Thank you! I hope it will be good build

UPDATE

Yesterday a large package arrived from Germany. Exactky from the shop Aquatuning.de that supports this project. The package was very big because there were also some things for the next project



I would like to really thank Aquatuning.de shop for products sent to this project!

The first time I will use ALPHACOOL blocks, so I hope that will be as good as the blocks from the competitors. Because they look very well, we'll see how it will be on the temperatures.



RAM block is not nickel plated, or other modifications. I'm not 100% sure if I will use it - it's about to loop mainly looked simple and nice. But when I will use I will have to paint it black. At least in places that will not cover pastel water



As always ALPHACOOL VPP655 - or a licensed copy of the Laing D5. With these pumps work like best. Great performance, physically regulates inaudible at first to second grade and very silent.



ALPHACOOL XP3 block, for me, a big unknown. But both the appearance and content rich packaging making clear that it will not be anything wrong





There picture painted top of the case. Other parts of the case I will mount on after finishing everything inside because in the assembly is not absolutely necessary, and I dont want it scratched by carelessness photographing white on a white background is not the best, but unfortunately at the moment I have not a different background.

UPDATE

Finally, I started with the assembly of components into the chassis 

First came a ALPHACOOL XT45 240 radiator and it FP120 two PWM fans from Cooler Master. On their performance and noise'm very curious



Further, also the pump and expansion vessel directly mounted. Unfortunately Bitspower offers this kit only 150 mm and 250 mm. So I had to order a 100 mm tube to make it there came up and I had access to the threads in the radiator Perhaps it comes as soon as possible






During the week, another package arrived from Germany. This time from Nanoxia and CoolForce1.



I would like to really thank the company for Nanoxia and CoolForce1 sent fittings!

Like ALPHACOOL blocks and with these fittings will work for the first time





These fittings use the nut just like the classic fittings on the hose





They can not miss Angle Adapters. The most probably not what you say, from each manufacturer are almost the same, changing only logo I received 90 °, 45 ° and 30 ° couple.





Blanks look decent and i will tune to the cabling, which will also be black and gray.



All 35 pieces together



We got some extra things, molex cables and power strips and extension cords PWM.

UPDATE

Lately I have less and less time .. Definitely catch. But despite that starts next week here on the forums next project and it will definitely be a big machine

However, in this project I finished water circuit of the board and joined graphics, so I just have been putting the board in the case and connect cabling + two pipes which closes the whole loop and it will be ready for filling

Here there were only connect to the graphics cpu block.



Originally I thought I was going to bend pipes, but when I did this, I did not like it. I just like straight lines in the circuit and must be bent pipe ram block to the CPU block was crooked and did not pose any real good ..



Detail on the connections using CoolForce fittings and pipes PETG.



Almost the entire water system, just mount the cabinet and can be impregnated!




I also aks my sponsor, who once patronized me and offered me two SSDs for this project



I would like to really thank the company for Adata sent samples!

We chose disks so it was all the room with good speed reading, writing not completely super fast, but I think in this case it does not matter



The discs are in a small package. Looks very classy



These discs are quite light but very well done and especially their appearance is, at least for me, super







I think that in a week by a computer could be done

UPDATE

It's the latest update, because the computer is ready and functional. The final pictures, I will try to deliver as soon as possible, hopefully this Monday

There is already a complete circuit and actually cabling and everything is ready for filling.



After soaking liquid I'm still mounted disks. The "front" of them left the place, so that's why I like to solve their installation





Well .. here a little tasting The computer is fully functional and there is a photo when during first turn

UPDATE

So here are the photos of finished computer