Just purchased a Kingston SHPM2280P2-480G M.2 SSD and have it installed directly on my MB (in its M.2 connector), and as per the Gigabyte GA-Z97X-UD3H manual I do not have any hard drives plugged into SATA3 4/5 Connectors. I also do not have any cards plugged into the MB...so I am confused as to why I am not getting the speeds shown on the Kingston SHPM2280P2-480G overclockers.com review. BTW M.2 slot is set to 4x.
Here is a picture of the Anvil score for the drive as reviewed by overclockers.com:
Here is a picture of the Anvil score from my system:
Can anyone speculate why my Kingston SHPM2280P2-480G is running slower than the one reviewed?
Thanks,
MrSparkle
My System:
Gigabyte Z97X-UD3H
8.00 GB RAM
Windows 7 Ultimate x64
Intel(R) HD Graphics 4600
Intel Core i7-4790 CPU @ 3.60GHz
Kingston SHPM2280P2/480G ATA M2 SSD
Here is a picture of the Anvil score for the drive as reviewed by overclockers.com:
Here is a picture of the Anvil score from my system:
Can anyone speculate why my Kingston SHPM2280P2-480G is running slower than the one reviewed?
Thanks,
MrSparkle
My System:
Gigabyte Z97X-UD3H
8.00 GB RAM
Windows 7 Ultimate x64
Intel(R) HD Graphics 4600
Intel Core i7-4790 CPU @ 3.60GHz
Kingston SHPM2280P2/480G ATA M2 SSD