- Joined
- Jul 2, 2015
- Location
- Minnesota
I'm back in the workshop with another build. This will be a liquid cooled 3-way 980 GTX gaming system for a friend. I'll post photos of the hardware as it arrives to me. The theme will be inspired by Star Trek. I'll be performing some case mods to the Phanteks Enthoo Luxe Full tower case. I really like this case for it's features.
I'll be hardlining with 1/2" OD x 3/8" ID PETG tubing, Mnpctech offers 24" & 12" pre-cut tubes here, http://mnpctech.com/pc-computer-alp...ng/petg-tube-clear-bend-petg-tubing-mnpctech/
Mnpctech created a full view replacement window panel to show off the hardware in his Phanteks Enthoo Luxe case. It's CNC machined from 3/8" thick 100% cast acrylic.
Remove this Black factory case screw. You will replace it with the included Black Thumb screw included with the panel.
The bottom of the clear panel has groove that mounts over the lip of the Phanteks chassis.
The clear panel is mounted onto the chassis vertically, from the bottom first.
The clear panel includes this custom made lock washer. The raised portion of the washer must be positioned over the clear panel.
Use the included Black Thumb screw and lock washer to fasten in the clear panel.
I like the clean look of this Antec 380 front grill
The very 1st "Ph-antecs" case mod
Shrouding the Phanteks Luxe chassis is really easy....
Just make a cardboard template
Used my template to cut a piece of White opaque acrylic... everything took less than 30 mins... I will use adhesive backed velcro to attached the shroud, so it's easily removed.
Stay Tuned for more soon!
I'll be hardlining with 1/2" OD x 3/8" ID PETG tubing, Mnpctech offers 24" & 12" pre-cut tubes here, http://mnpctech.com/pc-computer-alp...ng/petg-tube-clear-bend-petg-tubing-mnpctech/
Mnpctech created a full view replacement window panel to show off the hardware in his Phanteks Enthoo Luxe case. It's CNC machined from 3/8" thick 100% cast acrylic.
Remove this Black factory case screw. You will replace it with the included Black Thumb screw included with the panel.
The bottom of the clear panel has groove that mounts over the lip of the Phanteks chassis.
The clear panel is mounted onto the chassis vertically, from the bottom first.
The clear panel includes this custom made lock washer. The raised portion of the washer must be positioned over the clear panel.
Use the included Black Thumb screw and lock washer to fasten in the clear panel.
I like the clean look of this Antec 380 front grill
The very 1st "Ph-antecs" case mod
Shrouding the Phanteks Luxe chassis is really easy....
Just make a cardboard template
Used my template to cut a piece of White opaque acrylic... everything took less than 30 mins... I will use adhesive backed velcro to attached the shroud, so it's easily removed.
Stay Tuned for more soon!