4P Down

WhitehawkEQ · Jan 21, 2016

Well, 1 of my 4P's is down, not sure if it's the MB or PSU, will find out in the morning.

Silver_Pharaoh · Jan 21, 2016

Damn. Hope it's a simple fix!!!!!
Fold on with the rest though! :salute:

Macaholic · Jan 22, 2016

That stinks. I've got a few idle parts if you find you need something in particular to help get things running again. :thup:

WhitehawkEQ · Jan 22, 2016

What happens is if I reboot the 4P while it is still hot or if power goes out, it goes in to a thermal lockup and I have to wait hours or even a day before I can power back on. I'm going to get a new PSU and if it still happens then it's the MB and I really don't want it to be that. On the other hand, if I stop the client and let the 4P cool down before I turn off power or reboot, then no problem.
Any ideas?

donuts · Jan 22, 2016

Fans blowing on the board? Mine doesn't like hot re-boots, but it's only for about 15min wait time. Shutting off the PSU seems to help the wait time. I've waited up to an hour, but patience went out the window.

Currently mine runs caseless with a box fan circulating air in the room. Don't know how your set-up is configured, but I am curious to see what others have to say. First couple times it wouldn't reboot I was really worried. My 4p is relatively new, so I'm still learning it's quirks.

machausta · Jan 22, 2016

donuts said:
Fans blowing on the board? Mine doesn't like hot re-boots, but it's only for about 15min wait time. Shutting off the PSU seems to help the wait time. I've waited up to an hour, but patience went out the window.

Currently mine runs caseless with a box fan circulating air in the room. Don't know how your set-up is configured, but I am curious to see what others have to say. First couple times it wouldn't reboot I was really worried. My 4p is relatively new, so I'm still learning it's quirks.

When I had my supermicro 2p (6176) going it didn't like 'hot' boots either.

orion456 · Jan 23, 2016

Most of my supermicro 4p problems have been the PSU going bad. Started with random reboots then died over the space of a few months.

WhitehawkEQ · Jan 24, 2016

Macaholic said:
That stinks. I've got a few idle parts if you find you need something in particular to help get things running again.

What you really mean is you took your 4P apart and it's now in pieces and now you want to give some to me? :rofl:

Macaholic · Jan 29, 2016

WhitehawkEQ said:
What you really mean is you took your 4P apart and it's now in pieces and now you want to give some to me?

Only one of them.

WhitehawkEQ · Feb 2, 2016

Hey guys, take a look at this log and tell me if I need new CPU's:

Code:

14:52:03:WU00:FS00:Uploading 87.13MiB to 128.143.231.201
14:52:03:WU00:FS00:Connecting to 128.143.231.201:8080
14:53:36:WU01:FS00:0xa5:Completed 125000 out of 250000 steps  (50%)
14:54:10:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
14:54:10:WU00:FS00:Connecting to 128.143.231.201:80
14:54:17:WU00:FS00:Upload 0.07%
14:54:23:WU00:FS00:Upload 9.61%
14:54:29:WU00:FS00:Upload 19.15%
14:54:35:WU00:FS00:Upload 28.84%
[COLOR="#FF0000"]14:54:36:Started thread 117 on PID 1717[/COLOR]
14:54:41:WU00:FS00:Upload 38.95%
14:54:47:WU00:FS00:Upload 48.56%
14:54:53:WU00:FS00:Upload 58.24%
14:54:59:WU00:FS00:Upload 67.43%
14:55:05:WU00:FS00:Upload 77.11%
14:55:11:WU00:FS00:Upload 86.86%
14:56:11:WU00:FS00:Upload 93.46%
14:56:11:WARNING:WU00:FS00:Exception: Failed to send results to work server: Transfer failed
14:56:11:WU00:FS00:Trying to send results to collection server
14:56:11:WU00:FS00:Uploading 87.13MiB to 128.143.199.97
14:56:11:WU00:FS00:Connecting to 128.143.199.97:8080
14:57:09:WU00:FS00:Upload 6.67%
14:57:10:ERROR:WU00:FS00:Exception: Transfer failed
15:01:16:WU01:FS00:0xa5:Completed 127500 out of 250000 steps  (51%)
15:03:08:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:8106 run:0 clone:68 gen:8 core:0xa5 unit:0x0000000d088988e154cd32b6fab8f902
15:03:08:WU00:FS00:Uploading 87.13MiB to 128.143.231.201
15:03:08:WU00:FS00:Connecting to 128.143.231.201:8080
[COLOR="#FF0000"]15:04:12:Started thread 118 on PID 1717[/COLOR]
15:05:16:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
15:05:16:WU00:FS00:Connecting to 128.143.231.201:80
15:05:16:WU00:FS00:Upload 0.07%
15:05:22:WU00:FS00:Upload 11.05%
15:05:28:WU00:FS00:Upload 20.16%
15:05:34:WU00:FS00:Upload 29.91%
15:05:40:WU00:FS00:Upload 39.81%
15:05:46:WU00:FS00:Upload 49.13%
15:05:52:WU00:FS00:Upload 58.96%
15:05:58:WU00:FS00:Upload 68.86%
15:06:04:WU00:FS00:Upload 78.69%
15:06:10:WU00:FS00:Upload 87.65%
15:08:53:WU01:FS00:0xa5:Completed 130000 out of 250000 steps  (52%)
15:10:15:WU00:FS00:Upload 96.19%
15:10:15:WARNING:WU00:FS00:Exception: Failed to send results to work server: Transfer failed
15:10:15:WU00:FS00:Trying to send results to collection server
15:10:15:WU00:FS00:Uploading 87.13MiB to 128.143.199.97
15:10:15:WU00:FS00:Connecting to 128.143.199.97:8080
15:10:21:WU00:FS00:Upload 10.40%
15:10:27:WU00:FS00:Upload 20.30%
15:10:33:WU00:FS00:Upload 29.91%
15:10:39:WU00:FS00:Upload 39.59%
15:10:45:WU00:FS00:Upload 48.63%
15:10:51:WU00:FS00:Upload 58.24%
15:10:57:WU00:FS00:Upload 68.00%
15:11:03:WU00:FS00:Upload 77.61%
15:11:09:WU00:FS00:Upload 87.22%
15:12:13:WU00:FS00:Upload 96.84%
15:12:13:ERROR:WU00:FS00:Exception: Transfer failed
[COLOR="#FF0000"]15:13:53:Started thread 119 on PID 1717[/COLOR]
15:16:31:WU01:FS00:0xa5:Completed 132500 out of 250000 steps  (53%)
15:21:05:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:8106 run:0 clone:68 gen:8 core:0xa5 unit:0x0000000d088988e154cd32b6fab8f902
15:21:05:WU00:FS00:Uploading 87.13MiB to 128.143.231.201
15:21:05:WU00:FS00:Connecting to 128.143.231.201:8080
15:23:12:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
15:23:12:WU00:FS00:Connecting to 128.143.231.201:80
15:23:19:WU00:FS00:Upload 0.07%
15:23:25:WU00:FS00:Upload 8.68%
15:23:31:WU00:FS00:Upload 19.01%
15:23:37:WU00:FS00:Upload 28.69%
15:24:10:WU01:FS00:0xa5:Completed 135000 out of 250000 steps  (54%)
[COLOR="#FF0000"]15:24:54:Started thread 120 on PID 1717[/COLOR]
15:25:40:WU00:FS00:Upload 31.13%
15:25:40:WARNING:WU00:FS00:Exception: Failed to send results to work server: Transfer failed
15:25:40:WU00:FS00:Trying to send results to collection server
15:25:41:WU00:FS00:Uploading 87.13MiB to 128.143.199.97
15:25:41:WU00:FS00:Connecting to 128.143.199.97:8080
15:25:47:WU00:FS00:Upload 9.68%
15:25:53:WU00:FS00:Upload 19.94%
15:25:59:WU00:FS00:Upload 29.91%
15:26:05:WU00:FS00:Upload 39.38%
15:26:11:WU00:FS00:Upload 48.56%
15:28:15:WU00:FS00:Upload 54.37%
15:28:15:ERROR:WU00:FS00:Exception: Transfer failed
15:31:49:WU01:FS00:0xa5:Completed 137500 out of 250000 steps  (55%)
[COLOR="#FF0000"]15:35:55:Started thread 121 on PID 1717[/COLOR]
15:39:23:WU01:FS00:0xa5:Completed 140000 out of 250000 steps  (56%)
15:46:59:WU01:FS00:0xa5:Completed 142500 out of 250000 steps  (57%)
15:50:07:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:8106 run:0 clone:68 gen:8 core:0xa5 unit:0x0000000d088988e154cd32b6fab8f902
15:50:07:WU00:FS00:Uploading 87.13MiB to 128.143.231.201
15:50:07:WU00:FS00:Connecting to 128.143.231.201:8080
15:52:15:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
15:52:15:WU00:FS00:Connecting to 128.143.231.201:80
15:52:15:WU00:FS00:Upload 0.07%
15:52:21:WU00:FS00:Upload 11.12%
15:52:27:WU00:FS00:Upload 20.01%
15:52:33:WU00:FS00:Upload 29.77%
15:52:39:WU00:FS00:Upload 39.59%
15:52:45:WU00:FS00:Upload 48.92%
15:52:51:WU00:FS00:Upload 58.75%
15:52:57:WU00:FS00:Upload 68.72%
15:53:03:WU00:FS00:Upload 78.47%
15:53:09:WU00:FS00:Upload 87.65%
15:54:33:WU01:FS00:0xa5:Completed 145000 out of 250000 steps  (58%)
15:55:15:WU00:FS00:Upload 97.34%
15:55:15:WARNING:WU00:FS00:Exception: Failed to send results to work server: Transfer failed
15:55:15:WU00:FS00:Trying to send results to collection server
15:55:15:WU00:FS00:Uploading 87.13MiB to 128.143.199.97
15:55:15:WU00:FS00:Connecting to 128.143.199.97:8080
15:55:21:WU00:FS00:Upload 9.97%
15:55:27:WU00:FS00:Upload 19.94%
15:55:33:WU00:FS00:Upload 28.98%
15:55:39:WU00:FS00:Upload 38.30%
15:55:45:WU00:FS00:Upload 48.27%
15:55:51:WU00:FS00:Upload 58.17%
15:55:57:WU00:FS00:Upload 67.35%
15:56:03:WU00:FS00:Upload 77.25%
15:56:09:WU00:FS00:Upload 86.58%
15:58:11:WU00:FS00:Upload 96.48%
15:58:11:ERROR:WU00:FS00:Exception: Transfer failed
[COLOR="#FF0000"]16:00:40:Started thread 122 on PID 1717[/COLOR]
16:02:10:WU01:FS00:0xa5:Completed 147500 out of 250000 steps  (59%)
16:09:43:WU01:FS00:0xa5:Completed 150000 out of 250000 steps  (60%)
16:10:41:FS00:Finishing
[COLOR="#FF0000"]16:11:39:Started thread 123 on PID 1717[/COLOR]

PID 1717 is the client, everything seems to work till it's time to upload.

JrClocker · Feb 2, 2016

Are you sure the network card is working good? (Or the Ethernet cable?)

WhitehawkEQ · Feb 2, 2016

JrClocker said:
Are you sure the network card is working good? (Or the Ethernet cable?)

Yes, it's able to download and I can go on the internet with Firefox so I know the nic is working.

JrClocker · Feb 2, 2016

Upload uses a separate set of conductors than download. Firefox could be more tolerant of data drops (i.e. higher BER).

Do you have a spare Ethernet card and cable laying around? Worth a shot if you haven't tried it yet.

If it's not the Ethernet, I would think maybe memory before CPU.

WhitehawkEQ · Feb 2, 2016

JrClocker said:
Upload uses a separate set of conductors than download. Firefox could be more tolerant of data drops (i.e. higher BER).

Do you have a spare Ethernet card and cable laying around? Worth a shot if you haven't tried it yet.

If it's not the Ethernet, I would think maybe memory before CPU.

I think your missing the point, look at what I have marked in red, and it will upload a WU if I get a a4 type WU.

WhitehawkEQ · Feb 12, 2016

I'm back at full speed with 2 4P's now, the 4P I had problems with had 2 things wrong with it.
1. PSU was going bad, changed from AX850 to RM1000. (AX850 was a referb)
2. OS was corrupted from a power outage, I reinstalled Ubuntu 14.04.02 and all is good.

orion456 · Feb 13, 2016

WhitehawkEQ said:
I'm back at full speed with 2 4P's now, the 4P I had problems with had 2 things wrong with it.
1. PSU was going bad, changed from AX850 to RM1000. (AX850 was a referb)
2. OS was corrupted from a power outage, I reinstalled Ubuntu 14.04.02 and all is good.

Very good!

I was unable to get U 14.04 working on my 4p. It resulted in super slow video so I used U 12.04 instead. Do you have a separate video card?

WhitehawkEQ · Feb 13, 2016

orion456 said:
Very good!

I was unable to get U 14.04 working on my 4p. It resulted in super slow video so I used U 12.04 instead. Do you have a separate video card?

I'm using a GT210 on both of my 4P's, and I'm using Ubuntu 14.04.02 LTS, 12.xx is end of life.

donuts · Feb 13, 2016

Glad you got it figured out. Also good to know about EOL on 12.xx. (14.04 wasn't working out for me either. Though it is a BOINC rig.)

Nathan_P · Feb 13, 2016

for a folding box it shouldn't matter that its EOL, christ xp was EOL when everyone was using it for multi gpu boxes 4-5 years ago

WhitehawkEQ · Feb 13, 2016

Nathan_P said:
for a folding box it shouldn't matter that its EOL, christ xp was EOL when everyone was using it for multi gpu boxes 4-5 years ago

Yes, but you can still share drives, folders and files on XP, with Ubuntu 12.xx, you can NOT install Samba for sharing, for that mater, you can't install any updates on 12.xx. Also 14.10 is EOL as well.

4P Down

Premium Member

Likes the big ones n00b Member

Member

Premium Member

Member

Member

Member

Premium Member

Member

Premium Member

AKA: JrMiyagi

Premium Member

AKA: JrMiyagi

Premium Member

Premium Member

Member

Premium Member

Member

Member

Premium Member

Similar threads