I wasn't sure what the recessed area on ( I assume the) the back of the tray was for, but it looks like it will be for you to run the wiring? That's gonna make for a lot of patients measuring and cutting the wire to exact length, but will look so sweet. So last question, you done yet? Look forward to the updates.
Since the block is finally here, it is time to start the massive sleeving job!..
Today i started on the 24pin, and have some troubles choosing what layout to go with, so i took some photos and threw in some numbers on them,
and hopefully you guys can help me pick the best design, before i go all crazy with all the damn double wires i have to make!
Take your pick and let me know guys
Also added a quick picture of my pinout for the 24pin.. massive! ..Always remember to write down the pinouts before you rip the old cable apart !
And will be using white connectors in the front, instead of black ones, so threw in a photo of the 4pin CPU cable going in through the block, to give you an idea.
Also i decided that it will look too disturbing to the eyes if using cablecombs,when there's 44 cables in the back that has to be nicely tugged together..
So instead i will probably go Oldschool and do cable lacing on all 44 cables.
Hopefully with a very neat looking end result.
Please write what number you like the most, so i can get started with the 24pin.
So the past week i've been busy doing all the sleeving, and I'm still not done... I started with the cable lacing, (takes forever!), and i'm not sure i want to use the
blue cotton thread because it looks fluffy. So probably going to get some waxed blue thread instead and redo it.
Anyways i will attach a few images below so you can see what i mean.
I also installed all the waterblocks and fittings today, and see if i can find the best looking way to do the tubing, this weekend.
Another thing i have been doing is drilling 14 holes on the backside of the reservoir and tapped them, then mounted some standoffs that will keep the clear plexi plate in
place, which is going to keep all the cables neatly in place.. At least thats the idea, dont know how it'g going to look yet.
Almost forgot! Been trying a few options out for the placement of the powerbutton, and ended up bending some acrylic under the rad, and installed the button in that.
Not done with it yet though!.. need some fine adjustments and maybe some blue vinyl.. Originally i was going to put an LCD temp in the acrylic piece also, but we'll see
Stay tuned guys, soon more sleeving and also the tubing is getting done soon!
Thank GOD, i am allmost done with all the sleeving.. The cable lacing took forever and was hard on my OCD haha.
I still have to arrange them a little more neat and close together, and also sand the edges of the acrylic window that holds them in place.
But leaving the cables alone for a while and have started doing all the tubing, Just to get my mind on something else than lacing!
Anyways, here's a few photos of the sleeving result so far, hope you enjoy it, and i'm sure it will look very nice once it's all done.
Majestic looking EK WATER BLOCKS below <3
Now to continue all the bends on the tubing. Needed a break! haha.
SO after 14 days more of work offshore, and i am finally home again to work on this beauty!.. Just finished the Tubing, and am pretty happy about the result, or i WAS, untill i did the first leak test!
one of the small 90 degree bends from tray tunnel to rad was leaking, so tried 6 new bends but just couldnt get it to work in that small space, so ended up using 2 x 45 adapter and a spacer instead.
Also the top tube from cpu to reservoir was bleeding a little, so decided to make a new tube for that one as well.. And finally no leaks! But updates of that will follow soon!
First off, here's a few images of the bends.
I also took the time to get the 2 x 6pin sleeves inside and under the frame, instead of the horrible crap where i had them going out and over the frame! Was messing so bad with my OCD, so had to fix it, and finally im pleased!
While posting this update, the blue morpho is doing a 24 hour bleed test! Updates and final images VERY soon !! <3
Hope you like it !! cant wait to show you the next update!
I had to go with red and white inside, and blue and white outside. I think red and black have run their course for me for a while. Unless you pick them for your next build, then I'm subbed. LMAO
I had to go with red and white inside, and blue and white outside. I think red and black have run their course for me for a while. Unless you pick them for your next build, then I'm subbed. LMAO
FINALLY it was time to fill the loop with the beautiful Mayhems Pastel Blue, and it looks amazing! Really spot on color match with the sky blue acrylic parts!
Before i filled the loop, i obviously did a leak test and cleaning of the parts with distilled water, and found a few smaller leaks, that had to be fixed.
But once that was taken care off, the mayhems blue filled up the loop and res block of the Blue Morpho, and result looks breathtaking! <3
So lean back, scroll through these images and enjoy! .. Final images will come very soon, just have to do some minor adjustments before it's ready.
Need to figure out if i should bend some of the remaining white acrylic, and do some smexy cover for the I/O in the top,
and also still need to get the white acrylic cover in the bottom finished, and glue the small butterflies in place, for a final touch.. Also last but not least, tighten those cables up again so please my OCD..
Enjoy!! Thanks so much for the support both from all you guys in the forum and my facebookpage "Beckmodz - liquid Designs" who has been following this project!<3
I keep looking at it and it feels like the first time I saw Disney World. LOL. Non geek friends come over and I pull up this build thread and we point and "Ooh" and Aah" like little kids.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.