- Joined
- Aug 15, 2015
Got Asus Maximus VIII Impact MiniITX, but the manual does not explain clearly what's the plus pins on the front panel connectors row. The illustration of the pins is kind of like this:
_________*
PWRBTN * * RESET
_______* *
PLED___ * * +HDLED
_______* *
_________ PIN 1
And my Cooler Master Elite 110 has an arrow on each plug, with a + and - for PLED. Read that "PIN 1" on the illustration above stands for plus, but where exactly on this row should I put the plus (arrow) pins?
This is my first build, and the fan of the PSU will not even start, there is just one blink of a blue light at the front panel, and the start button and the jack connections for mic and headset are lit up, but nothing happens, no sound, even though I have installed the system speaker which should beep to indicate what's wrong. Hope it's only the plus pins above that have been misplaced, and not that I have fried components with static or broken anything when pressing relatively hard to connect them.
_________*
PWRBTN * * RESET
_______* *
PLED___ * * +HDLED
_______* *
_________ PIN 1
And my Cooler Master Elite 110 has an arrow on each plug, with a + and - for PLED. Read that "PIN 1" on the illustration above stands for plus, but where exactly on this row should I put the plus (arrow) pins?
This is my first build, and the fan of the PSU will not even start, there is just one blink of a blue light at the front panel, and the start button and the jack connections for mic and headset are lit up, but nothing happens, no sound, even though I have installed the system speaker which should beep to indicate what's wrong. Hope it's only the plus pins above that have been misplaced, and not that I have fried components with static or broken anything when pressing relatively hard to connect them.