OP
- Joined
- Oct 2, 2016
- Location
- Your window
- Thread Starter
- #41
You added system agent voltage?
Do all four sticks work? Meaning, you can see two, have you swapped out sticks in working slots?
Is that memory on their QVL list?
Have you reached out to asus?
I have yet to over clock the CPU I know that's the first thing that should be done but I don't want to screw it up. There are so many options and I am not an overclocker buy any means I'm still researching this as I don't want rush it and just assume anything at this point as it could cost me a lot of time or money .one of my biggest problems is that I can't find a lot of stuff on this exact i7 6850k as far as over clocking templates to get started.
Also the memory is not on the list I believe for the sabertooth x99 2400 MHz is the highest recommended ram for that motherboard same goes for the processor it also recommends only 2400mhz so I'm trying to decide if I should just send the ram back or keep it and mess with the overclocking of the CPU then mess with the ram and see if I can get it to work.
Even after the bios update tho every time I start up the PC and go into bios it's showing a different amount of sticks, last night when I shut it off it only saw 2 sticks this morning when I turned it on it saw 3 stick lol. And since I'm still learning it could be the overclock that not allowing my PC to see all the sticks, but once I put the correct 1.35 voltage into them it will probably see them I'm not sure tho. I work a lot haven't had much time so learning exactly what every setting does on my own is going to take quite some time, but I'm in it for the Long haul =)
Unless someone knows exactly every setting I should have and were it should go without missing a detail that could fry out my entire system, I'm on my own. I've got a couple recommendations from you and I appreciate it but when I get into bios and I start seeing setting like CPU strap and there was another one that lets you adjust ohm loads, many more settings I don't want to just jump the gun and change one or 2 things and then get frustrated when it doesn't work.... I don't know if that makes any sense .
Last edited: