Well, I just got my new motherboard yesterday, ECS K7S5A, and i was toying around with it. I lowered the mult. to 9 and cranked the fsb to 133, and restarted and voila!! 1.2ghz from my morgan 1ghz, this morning i wake up and had an idea, "I'll lower the multiplier to 8 and see if i can hit 8*166 just for fun even though i knew i had no chance with my pc133 sdram, so i lowered the mult to 8 rebooted and set the fsb to 138 and i got 1104mhz with decent temps, then tried 150, and booted with decent temps though a bit unstable, so i upped the vcore to 1.85, and when i powered up i went into the bios and looked at the hardware monitor and the temp said 44 and it was only at 800mhz, after this i powered down and set my mult back to 9, and wanted to go back to my original oc from last night, i cleaned off the hsf and cpu and reapplied ASII and powered up and i went into hardware monitor and my temp was 47 so i started to get upset so i removed the side of my case, removed the heatsink only to realize i cracked the core!!!!!!!!!!!! this sux