PROJECT LOG ModArt QUADRAD Custom Case (Double Sided)

ModArt ByLevon · Dec 31, 2016

The First Double Sided Mod Art QUADRAD Custom Case In The World / With Four Loop Four Rad Four Rez

Hello there. Welcome to my new project.[IMG]

We designed a big extreme case. A case with a square look.
4 radiators, 4 pumps, 4 reservoirs in the system. I wanted to build a system with 4 loops.[IMG]

For this reason the name QUAD-RAD.

Case design is mine.

This case can be used in different systems.

The case would be made from scratch, not by modifying a standard case.
After our first work, we decided to make a case in this view.

Case Designed as square cross-section and 45 degree broken.
The case is a plain-flap shape with the front and rear top panels on the wings.
It is designed to bend 45 degrees towards the side covers.
With this, the depth of the cradle, normally 18 cm, was removed by 30 cm.

We started making a 1/1 carton to see what the case would be like.

There are air grids on the wings. And on the outside there are reservoirs.

In the form of 4 reservoirs in 4 corners.

ModArt ByLevon · Dec 31, 2016

We made vector drawings of Case.

We used 1.20 mm sheet metal.

After the interrupted spaces, the finished state of the empty stall was 12.5 kg.

Corsair Obsidian Series 900D Super Tower Case is 18.6 kg.....

During vector drawing, we decided to make the box from 4 equal parts, 2 smaller parts equal to the upper and lower, 2 larger parts equal to the front and the back.

The chassis 2 will consist of the top and bottom parts, 2 front and back parts, motherboard back plate.

The radiator grills, specially designed on the 4 sides of the cabin, are integrated with the frame.

In the bottom and top part, another four 20mm diameter holes from the grille will fill the system with liquid from the top.

A) There are 2 side parts, integrated fangriller and a panel which provides all cable entry and exit into the case in the lower parts coming to the corners.

B) At the top, a 30 mm diameter ON-OF button and a 22 mm restart button were made. And two USB 3.00 sockets were made.

C) There are also two 5.25 drawers for fan controllers close to the top.

D) The HDD control drawer was made near the bottom.

The front and back panels were equally spaced so that both sides of the frame could be used as the front panel.

- - - Updated - - -

The drawings were cut in CNC laser.

To check the size of the sockets, the cable box was panned out and the gauge was checked. Necessary corrections were made.

ModArt ByLevon · Dec 31, 2016

The drawings were cut in CNC laser.

And the CNC sheet is bent with metal bender.

Twisted parts
The cut and bent parts together in bulk.

Front and rear panel interior and exterior details.
Details of the upper and lower panels.

[

IMG]http://imageshack.com/a/img924/696/ZbGg6d.jpg[/IMG]

ModArt ByLevon · Dec 31, 2016

The parts were assembled for testing purposes.

Silver_Pharaoh · Dec 31, 2016

Sub'd!!!!! Looking sweet! :thup:

and welcome to OCF!!

Blaylock · Dec 31, 2016

That looks incredible Levon! I really wish I had access to a CNC.

ModArt ByLevon · Jan 1, 2017

Hello there. First of all thank you very much.

I'm new here. And my english is bad. I use google translation. Sorry..

Please tell me if there is a mistake.
I have read the forum rules. But google translates sometimes wrong translation.

ModArt ByLevon · Jan 1, 2017

Thank you so much. The case will be completed in 1 month.

I will buy myself a small CNC. I will buy Step Craft. A very nice cnc. And 3d printer feature.

Alaric · Jan 1, 2017

Too good to pass up! A from scratch build on a grand scale. Subbed!

ModArt ByLevon · Jan 1, 2017

The base and ceiling were made of 2 pieces of hair marked in the picture to prevent the shaking of the table.

They were then welded to the base and ceiling.

Then, the back panel was screwed between them. This has increased the stability much more.

Blaylock · Jan 1, 2017

There is nothing wrong with using Google translation and there are several members here who use it. It does a good enough job as long as you spell everything correct in your language.

How thick is that steel? It looks very heavy.

Silver_Pharaoh · Jan 1, 2017

Man I want a CNC machine now :-/

+1 to what Blaylock said about Google Translate. It works pretty darn well! :thup:

ModArt ByLevon · Jan 1, 2017

Hello, thank you very much ..

The thickness of this steel is 1.2mm. I added the weight on the picture above. 12.5kg

I think it's normal weight. How about you?

Blaylock · Jan 1, 2017

Yes. Pretty close to normal. I think the major manufacturers use about 1mm thick.

ModArt ByLevon · Jan 9, 2017

I / O Panel is set to face down.

Special extension cables must be used on all sockets to not open the cover each time to mount the mainland cable.

There is no need to open the case cover with extension cables to be attached to the case corners.

Cables collected at the corners.

With the holes to be opened, the cables will be hidden behind the panel.

ModArt ByLevon · Jan 9, 2017

Mounted cable sockets and their cabling.

And the cables were taken from these holes to the rear.

ModArt ByLevon · Jan 9, 2017

1- Display Port panel mount cable Male/Female StarTech 3-Feet (6 pcs)
2- USB 3.0 Dual Male/Female Panel Mount Cable 100cm (6 pcs)
3- HDMI 1.4 19pin Male/Female Panel Mount Extension Cable 60cm(5 pcs)
4- DualPort USB3.0 Female Mount to Motherboard 20pin Cable40cm(2 pcs)
5- MecallTech RJ45 Male/Female Panel Mount Ethernet 60cm (2 pcs)
6- AC 250V C14 Power Cord Inlet Plug Socket Switch Screw Mount(2 pcs)
7- Ugreen Digital Optical audio cable Toslink gold plate 100cm(2 pcs)
8- Ugreen High Speed Cat 7 RJ45 Ethernet Network Cable 200cm (2 pcs)
9- Kenable RCA Panel Mount Socket Audio Red White & Yellow set(2 set)
10-Kenable Optical TOSlink Panel Mount Socket to Socket (2 pcs)
11-Kenable Panel Mount 3.5mm Male/Female Locking Nut Stereo (6 pcs)
12-Vention Jack 2 RCA Audio Cable to 2 RCA Aux Cable 100cm (2 pcs)

Silver_Pharaoh · Jan 10, 2017

To have access to all those connectors... :drool:

That's pretty darn sweet! :thup:

Nebulous · Jan 12, 2017

Holy that's an awesome scratch build! Can't wait to see that finished gem! :thup:

t1nm4n · Jan 13, 2017

Truly impressive. I've been eyeing this machine for awhile, I think it woudl be a nice addition to any case modders tool box.

Your case looks awesome, can't wait to see the finished product, I already know it will be awesome, now it's just waiting to see it finished.

PROJECT LOG ModArt QUADRAD Custom Case (Double Sided)

Registered

Attachments

Registered

Registered

Registered

Likes the big ones n00b Member

"That Backfired" Senior Member

Registered

Registered

New Member

Registered

"That Backfired" Senior Member

Likes the big ones n00b Member

Registered

"That Backfired" Senior Member

Registered

Registered

Registered

Likes the big ones n00b Member

Dreadnought Class Senior

Member

Similar threads