PROJECT LOG Tempest (modded CM MasterCase Maker 5t) by SimpleModz

Hey guys,

Welcome back to another one of my builds logs! I'm happy to announce my entry into the 2017 Cooler Master CaseMod World Series in the MasterCase Maker 5t. It's a stunning looking case and I'm excited to work on it. I have a few interesting things planned for it, including some layout changes on the inside and a more unique water cooling loop set-up.

I am calling this one Tempest and it will be based on the Tempest spaceship from the new Mass Effect Andromeda game.

I did an overview video of the case as well as talked a bit about the mods where you can get a better idea of what I'm going to do in this case.

Check it out below:


SPECS:

Case - Cooler Master MasterCase Maker 5t
CPU - Intel TBC
MB - ASUS Rampage V Extreme
RAM - 8 x 4GB Crucial Ballistix Elite 3000MHz DDR4
GPU*- NVIDIA TBC
SSD -*2 x 275GB Crucial MX300
HDD - Seagate TBC
PSU - Cooler Master V1000

Custom cables & lighting - CableMod

Water Cooling - Bitspower

I'll start it off with some photos of the gorgeous case:







































Thanks for checking it out and stay tuned for more

Cheers,

Alex

That's an impressive looking case, the build quality seems fantastic.

Now this is one sexy case, definitely my favorite CM so far.

Moratek said:

That's an impressive looking case, the build quality seems fantastic.

Click to expand...

Dalchi Frusche said:

Now this is one sexy case, definitely my favorite CM so far.

Click to expand...

Yea guys, it's a really nice case. I've worked with the normal Maker 5 before and this one still have me really impressed. It's the same case pretty much but with a few upgrades

Im in!

I think I might need to reach out to CM and see if I can acquire a sponsorship, this would be an awesome workshop PC case...... can you imagine my logo(sig pic) etched into the glass?

Great things Alex! Look forward to this coming to fruition.

Sub'd for sure. Is that a "Stock" case from cooler master. When you say "modded CM MasterCase Maker 5t", you mean that it was modded pior by CM in some way or another? Or refers to your planned Tempest mods?

Sorry the SwartHack can be a little slow at times...

Suerte

Gonna have to follow this one. Huge fan of the game series so I will be interested to see how this ends up.

Yup, I'm in.

Blaylock said:

Im in!

Click to expand...

Haha cheers mate

Dalchi Frusche said:

I think I might need to reach out to CM and see if I can acquire a sponsorship, this would be an awesome workshop PC case...... can you imagine my logo(sig pic) etched into the glass?

Great things Alex! Look forward to this coming to fruition.

Click to expand...

Yea the case is awesome. I'm really loving it and the quality is really good too

SwartHack said:

Sub'd for sure. Is that a "Stock" case from cooler master. When you say "modded CM MasterCase Maker 5t", you mean that it was modded pior by CM in some way or another? Or refers to your planned Tempest mods?

Sorry the SwartHack can be a little slow at times...

Suerte

Click to expand...

Hey mate. No worries, happy to answer your question hehe. The case comes as is from Cooler Master. The "modded" that I put in the title is referring to my Tempest mod once done

Lochekey said:

Gonna have to follow this one. Huge fan of the game series so I will be interested to see how this ends up.

Click to expand...

As am I hehe, thanks for following! I haven't been able to play the new game yet unfortunately. A bit too busy at the moment

Alaric said:

Yup, I'm in.

Click to expand...

Thanks mate

Hey guys,

Progress has been slow with this one however I thought to give you guys at least some content as I'm still trying to figure out how to tackle this build

The case is fully stripped at the moment, ready to be cut into! And by the look of things, there will be a lot of cutting

















Stay tuned!

Cheers,

Alex

Things have started to come apart



















Stay tuned for more!

Cheers,

Alex

Not much real progress on the build with this update unfortunately. It's a bit hard to keep up with the 3 builds I'm working on at the moment.

Here are the new Cooler Master RGB fans.

















Stay tuned for more!

Cheers,

Alex

Hey guys,

Sorry for the lack of updates on this build but unfortunately that's what happens when you're working on 3 case mods at the same time and they all have to be finished at the same time. Plus I've got my full time job on top of that. Been super busy lately.

What I'm gonna do however is focus on getting this build log ready and finishing this build as it has to be done and submitted for the Cooler Master Case Mod World Series by the 3rd of May.

So here is the progress that I've made so far. The PSU has been mounted in it's new location, I have a new motherboard tray that is mounted over the existing one to maintain the case rigidity, the back panel has been completely cut out and a new panel installed that has a 240 radiator mount and the I/O is in the top.

I also have the extra 'top' exterior panel mounted on the back. There is also a cut out in the mid-tray section with a piece of acrylic mounted over it. This is for the pass-through fittings later.

You will also see an acrylic panel in the bottom and a piece on the back.

I hope that all makes sense but I'll have a video in the end explaining it all and showing more of the actual progress for those interested.

I have to give a huge shout out to Corey from Imfaceroll Gaming for the help in cutting the aluminium panels on his CNC machine. Otherwise I don't know how I would have had time to get this done for the submission date.

Also thanks to Justin from Metalicacid for the tips on how to brush my aluminium panels. I think minus some of the deeper scratches they all came out really good. Most of that will be covered anyways.

So here are the photos guys!











I forgot to mention the cut out in the front panel as well.

















Hope you guys enjoy the progress so far and stay tuned, there will be a lot more photos to come!

Cheers,

Alex

Hey guys,

Here's some quick pics of the motherboard going in. I know the Rampage V Extreme is a bit old now however it will match the theme perfectly

Also, huge shout out to Mwave Australia for sending over a 6850K for the build!















Time to get some water blocks on

Thanks for checking it out!

Cheers,

Alex

I don't think I've done this many water blocks on a motherboard before, and GPUs will be added as well of course

I'm excited to pipe it all up!

I decided not to use the monoblock cover that comes with this Bitspower kit and I'll connect everything separately. It will work better with the look I am going for.



























Thanks for checking it out!

Cheers,

Alex

Hey guys,

Here's some further progress of the way I mounted the reservoir/s and also some close-ups of the combo. You can also get a better look at the new back panel and the cut out in the mid section.

You can see the vinyl design for the fans and if you saw earlier in the build log, I showed the new CM RGB fans... well I ended up changing these to the red LED JetFlos to make things easier with the cabling; the RGB fans were adding one extra cable per fan and I would only want to have them on red for this build anyway so I didn't make sense to add the extra cables.



























Thanks for checking it out and stay tuned as I wrap up this build log.

Cheers,

Alex

Hey Alex,

Is that aluminum or steel? And what thickness do you prefer to work with?

Dalchi Frusche said:

Hey Alex,

Is that aluminum or steel? And what thickness do you prefer to work with?

Click to expand...

Hey mate! It's alu, steel would be too hard to cut. I've used 1.5 and 1.2mm thickness before. This is 1.2mm

Alright, motherboard is in, the reservoir is in, some of the tubes are in and the graphics cards have waterblocks on. I'm using reference 980s but hey it's not about the latest hardware with this build.

























Thanks for checking it out and stay tuned for more!

Cheers,

Alex