Results 1 to 7 of 7
Thread: My multipliers are screwy
04-02-02, 07:02 PM #1
My multipliers are screwy
When I set my multipliers on 10 or 10.5 it shows 9.5,but the rest work fine,any ideas?
It is unlocked and never has been any problems always worked fine,did I burn up my CPU?
04-02-02, 07:17 PM #2
04-02-02, 07:57 PM #3
04-02-02, 09:25 PM #4
Well I redid it and everything is working except the 10 multiplier..\
but I found one of the pads on my CPU seems to be falling apart,is there a quick fix for this
04-02-02, 09:34 PM #5
04-02-02, 10:12 PM #6
Im talkng about thelittle foam tab on each corner of the CPU.
In fact that was the problem one closest to the L1 was worn so bad I thing the heat sink may have been close enough to short it out,but anyway it seems to be ok now,I want to thank you guys again for the help,were would I be with out you guys...
Id be throwing a lot of ruined parts in the trash most likely
04-03-02, 03:38 AM #7
i think super glue would work fine.. or just tape it back.. ive seen in a thg video and they taped their little pad back on in the unlocking a XP video..
or i think u might be able to take all 4 off and buy a shim.. but dont do this first as im not sure how it will work.. just a idea..