Overclockers

dominick32 · 09-10-06, 04:42 PM

Well, I finally got my rig to boot and not freeze the bios at 500 FSB +.
CPU - E6600 Retail @ 4.32Ghz Week 25
RAM - Corsair PC8500 2X1GB 1200 mhz capable 5-5-5-15, 2.4volts
Mobo - Asus P5B-Deluxe Wifi with Bios 614

I pretty much tried everything for the last week or so and it would freeze up the bios on me, than require me to wait a few minutes for asus auto overclocking failure feature to kick in. 499 mhz FSB would be, but anything over 500 would freeze the bios no matter what Ive tried. Over here I have been hearing many similar stories to my own.

Pre-requisite:
1. Update to 614 Bios
2. Make sure you are using 1:1 memory setup with no dividers.

Finally, the only thing that worked for me was a simple voltage adjustment to 1.80 volts on the Southbridge, weird huh??? I always tried automatic voltage on SB and also up to 1.70volts, but never 1.80. Well what do you know? The one adjustment that I dont try creates complete stability. I would urge anyone with this mobo having problems getting over 500 FSB to definitely select manual and raise SB voltage to 1.80 volts. Be sure you have decent case air cooling to prevent any heat incidents.

Right now I am cruising the XP desktop with full stability @ 500 FSB. Give me some time to push her further.

More results to follow.

Rattle · 09-10-06, 04:46 PM

nice I also freeze with 500fsb even if its with a 6 multi lol

dominick32 · 09-10-06, 04:47 PM

Quote:

Originally Posted by Rattle

nice I also freeze with 500fsb even if its with a 6 multi lol

Rattle,
Select 1.80 volts on Southbridge and I can almost guarantee stability.

Rattle · 09-10-06, 04:50 PM

i wonder if that bitch gets hot

I am to lazy to mess with it now

d94 · 09-10-06, 05:27 PM

guys try this out!
if this turns out to work
ill switch back to my p5b-d...

gixxer420 · 09-10-06, 05:49 PM

^
|
|

lol

Evilsizer · 09-10-06, 06:04 PM

Quote:

Originally Posted by d94

guys try this out!
if this turns out to work
ill switch back to my p5b-d...

no no your P5B is missing and i know where it is. LOL :P

dominick32 · 10-22-06, 04:48 PM

bump for recent inquiry on this issue...

09-10-06, 04:42 PM	#1
dominick32 Senior Solid State Aficionado Join Date: Dec 2005 Location: New York	Is your conroe and Asus P5B-Deluxe Wifi not capable of 500FSB? Read This! Well, I finally got my rig to boot and not freeze the bios at 500 FSB +. CPU - E6600 Retail @ 4.32Ghz Week 25 RAM - Corsair PC8500 2X1GB 1200 mhz capable 5-5-5-15, 2.4volts Mobo - Asus P5B-Deluxe Wifi with Bios 614 I pretty much tried everything for the last week or so and it would freeze up the bios on me, than require me to wait a few minutes for asus auto overclocking failure feature to kick in. 499 mhz FSB would be, but anything over 500 would freeze the bios no matter what Ive tried. Over here I have been hearing many similar stories to my own. Pre-requisite: 1. Update to 614 Bios 2. Make sure you are using 1:1 memory setup with no dividers. Finally, the only thing that worked for me was a simple voltage adjustment to 1.80 volts on the Southbridge, weird huh??? I always tried automatic voltage on SB and also up to 1.70volts, but never 1.80. Well what do you know? The one adjustment that I dont try creates complete stability. I would urge anyone with this mobo having problems getting over 500 FSB to definitely select manual and raise SB voltage to 1.80 volts. Be sure you have decent case air cooling to prevent any heat incidents. Right now I am cruising the XP desktop with full stability @ 500 FSB. Give me some time to push her further. More results to follow. Attached Images __________________ Next Level Hardware Solid State Drive Technology Discussion Thread ...i7-920 D0@ 4.59 GHz...6GB Dom GT's Cas7...TRUE...4870X2...Asus P6TD...Corsair HX1000...Intel X25-M G2...2 X 1TB Blacks in Raid1... Dominick32 states "Bow down to your SSD god dominick32 and kiss my feet which are actually made of pure light. Jason4207 Responds: "Upon closer inspection to go in for that foot kiss I'm noticing that the 'light' isn't doing you any justice. This should help. :) Circa 2010

09-10-06, 04:46 PM	#2
Rattle Member Join Date: May 2005 Location: Home... again	nice I also freeze with 500fsb even if its with a 6 multi lol __________________ i5 750 @ 4.0 1.25v - P55 UD6 4gb RipJaws 1600 7-7-7-20 eVGA gtx 470 800/1600/1800 - G2400WD 300 Vraptor - 640 Black Forte - ATH-AD700 - DT770 pro Corsair 750 - HAF 932 7G KB - G9 - func 1030 HEAT

09-10-06, 04:50 PM	#4
Rattle Member Join Date: May 2005 Location: Home... again	i wonder if that bitch gets hot I am to lazy to mess with it now __________________ i5 750 @ 4.0 1.25v - P55 UD6 4gb RipJaws 1600 7-7-7-20 eVGA gtx 470 800/1600/1800 - G2400WD 300 Vraptor - 640 Black Forte - ATH-AD700 - DT770 pro Corsair 750 - HAF 932 7G KB - G9 - func 1030 HEAT

09-10-06, 05:49 PM	#6
gixxer420 Member Join Date: Mar 2003 Location: USA	^ \| \| lol __________________ :: 8400 @ 4.2 :: Giga Ud3p :: Ballistix Tracer 2gb :: Evga GTX 260 / 216 :: CM 690 :: OCZ GameXstream 600

10-22-06, 04:48 PM	#8
dominick32 Senior Solid State Aficionado Join Date: Dec 2005 Location: New York	bump for recent inquiry on this issue... __________________ Next Level Hardware Solid State Drive Technology Discussion Thread ...i7-920 D0@ 4.59 GHz...6GB Dom GT's Cas7...TRUE...4870X2...Asus P6TD...Corsair HX1000...Intel X25-M G2...2 X 1TB Blacks in Raid1... Dominick32 states "Bow down to your SSD god dominick32 and kiss my feet which are actually made of pure light. Jason4207 Responds: "Upon closer inspection to go in for that foot kiss I'm noticing that the 'light' isn't doing you any justice. This should help. :) Circa 2010

Overclockers

Internet Services

Website Development

Tech Hardware

09-10-06, 05:27 PM	#5
d94 $30 a phone Join Date: Sep 2004 Location: 48302	guys try this out! if this turns out to work ill switch back to my p5b-d...