[O/C] Futuremark Release 3DMark 11

Brolloks · 12-09-10, 06:47 PM

Figured it out
W3680 at 4.5 Ghz
GTX 580 at 910
http://3dmark.com/3dm11/99576

TomPC3 · 12-09-10, 06:54 PM

Got SLI going this evening.....

dejo · 12-09-10, 06:59 PM

Ed, what did you have to change to get it to come around?

and my card wont run the same settings as vantage.

Brolloks · 12-09-10, 07:01 PM

It did not like increased PCIE at all, had it at 104, lowered it to 100 and ran OK, yeah I cannot do 950 like on Vantage either

dejo · 12-09-10, 07:23 PM

I never could do vantage at 950 all mine would do is about 935 or sometimes 940 and then 2250 on mem but 3d11 I have to stop mem at 2230. but whats wierd is that I ran my 3d11 runs with pci at 115

Brolloks · 12-09-10, 11:15 PM

HD 5870 (1000/1200) and i7-920 at 4.2 Ghz
P5044 3DMarks
http://3dmark.com/3dm11/101868

vixro · 12-09-10, 11:30 PM

Quote:

Originally Posted by Brolloks

I must be doing wrong, even the 920/5870 sucks
5870 at 950/1300
920 is at 4.2 Ghz

http://3dmark.com/3dm11/86306

You score is low I think for the 920 and your cpu clocks.

Quote:

Originally Posted by Brolloks

HD 5870 (1000/1200) and i7-920 at 4.2 Ghz
P5044 3DMarks
http://3dmark.com/3dm11/101868

With Brolloks posting a similar system you should be more in the 4800-5000 range.

My score was only 43xx partly because I had all of my apps still open, including anti-virus and other cpu related programs. A couple more runs on a clean system and no oc on my 5870 (875/1225) put me closer to 4400 @ 3.6ghz.

m0r7if3r · 12-09-10, 11:37 PM

man...just watching this bench (frickin finals...keepin me from benchin) I can tell it's gonna take some time to get it hammered down. Wonder if the bot will adopt it or not...

thobel · 12-09-10, 11:41 PM

I7 980 @ 4.4GHz GTX 480 Tri Sli @ 905/2200 ----- P15384 Score

http://3dmark.com/3dm11/101640

lolwut · 12-10-10, 12:56 AM

http://3dmark.com/3dm11/102915

4724

i7 920 @ 4ghz / Radeon 5870 900/1300

Woomack · 12-10-10, 03:27 AM

P6170
http://3dmark.com/3dm11/97312

single GTX470@915/2060MHz , i7 950@4.2GHz
260.99 driver / all auto settings with performance profile

sandyduff · 12-10-10, 03:37 AM

Does anyone else have problems running the physics test...?

I get through all the graphics tests no problem but after it loads the first physics test, the screen just goes blank and nothing happens... I've tried downclocking my cpu slightly, turning off HT, bumping vcore a notch... nothing works....

Fixed... oddly enough it was a driver issue, updated to 10.11 and can run the cpu tests while overclocked... but the dreaded overclocked GPU dual screen flicker is back!! C'mon AMD!!

Anyway...

P7802

http://3dmark.com/3dm11/106391;jsess...v8Bt5jDtpp2bEt

Increased to 4GHz, P7891... not a very big jump... 5970 is at 900/1200

http://3dmark.com/3dm11/106879;jsess...pcm05Results=0

Bumped my core clock to 950MHz and got a bigger jump... P8329 (i7 920@4GHz with HT on, 5970 @950MHz core and 1200MHz RAM)

http://3dmark.com/3dm11/107398;jsess...pcm05Results=0

Angry · 12-10-10, 06:22 AM

Athlon II 630 X4 @ 3.3ghz DDR3 @ 1500 w/ 5770 = 2325
Athlon II 620 x4 @ 3.2ghz DDR2 @ 1000 w/ 5830 = 2653

Just playing with it, and a system I built for a family member.

:edit:
Wow...
Oc'ed my 5830 to 900/1200 and got 2856.

Man, too bad I cant crossfire the 5770 with my 5830 for a bit of more fun.

Hardass · 12-10-10, 10:09 AM

I7 950 @4.4 GTX 480 @ 880/2000
P6464
http://3dmark.com/3dm11/110809

cold.nut · 12-10-10, 10:39 AM

need 3DMark 11!

christmas presents put me all out of my money

EarthDog · 12-10-10, 10:48 AM

Benching the other free ones to get your 10 in are free!!!

cold.nut · 12-10-10, 10:50 AM

don't tempt me Earth..

nah, pot comes in for christmas. so christmas break i will officially join!

bunkachunk · 12-10-10, 11:28 AM

Quote:

Originally Posted by David

Read More
p2477- x4 635 @ 3.192/ HD5770 stock
Score List
P3594 - W3680 @ 4.5GHz | GTX 580 @ stock
P3600 - Q9300 @ 3.33 GHz | GTX 460 @ 900/1800/2200
P4353 - Q9550 @ 3.6GHz | HD 5870 @ stock
P4523 - C2Q @ 2740 | HD 5970 @ 850/1100
P4731 - x6 1100T @ 4.26GHz | HD 5870 @ 975/1225
P4908 - i7 870 @ 4.4GHz | HD 6870 @ 1025/1175
P5636 - W3570 @ 4GHz | GTX 470 @ 850/1700/1800
P6034 - i7 980x @ 4.39GHz | GTX 480 @ 829/1658/1900
P6061 - i7 920 @ 4.2GHz | GTX 470 @ 920/1050

To have your score added, please list your score, CPU @ [clocks] & GPU @ [clocks]. Thanks!

eva2000 · 12-10-10, 12:20 PM

Interesting no cpu scaling and no tri-crossfire scaling yet it seems

First time retail 980X 3013A489 clocks with single HD5870 at 4.0Ghz vs 4.2Ghz @1025/1263 - 6pts diff LOL

2x HD5870 CFX

@1025/1250 = 9,055 http://3dmark.com/3dm11/89609
@1030/1250 = 9,081 http://3dmark.com/3dm11/89972

Tried 3x HD5870 @1000/1250 at 4.2ghz first

Extreme Preset

dejo · 12-10-10, 01:34 PM

very nice Eva. been a while since I seen you around. how ya been.

12-09-10, 06:47 PM	#81
Brolloks Benching Senior on Siesta Premium Member #8 Join Date: Dec 2006 Location: Land of Long Horns	Figured it out W3680 at 4.5 Ghz GTX 580 at 910 http://3dmark.com/3dm11/99576 __________________ Should I get a Quad- or Dual-Core? - How about joining us in the Benching Lounge for some secrets - Want to bench sub-zero...take a look. Heatware 280-0-0 HWBOT Profile Last edited by Brolloks; 12-09-10 at 11:16 PM.
	QUOTE Thanks

12-09-10, 06:54 PM	#82
TomPC3 Member Join Date: Sep 2005	Got SLI going this evening..... __________________ Play Rig Lian-Li PC-A70B / PCP&C 1200 TC EVGA780i FTW E8600 @ 4.42Ghz 1.35v TRUE 120 Corsair Dominator 4G DDR2 1080 2.2V 5,5,5,15 2T 2X 150G WD Raptors in RAID 0 SLI EVGA 580GTX's Dell 3007WFP-HC Win7 64bit
	QUOTE Thanks

12-09-10, 06:59 PM	#83
dejo Senior Moment Senior Member Join Date: Nov 2001 Location: Tyler, Texas	Ed, what did you have to change to get it to come around? and my card wont run the same settings as vantage. __________________ if it screams, crank it. if it cries, kill it Asrock z77 ex6 2600k @4.8ghz Samsung 2x4gb rams OCZ Vertex4 256gb ssd EVGA GTX480 Sparkle 1250 gold PSU Arc Midi case
	QUOTE Thanks

12-09-10, 07:01 PM	#84
Brolloks Benching Senior on Siesta Premium Member #8 Join Date: Dec 2006 Location: Land of Long Horns	It did not like increased PCIE at all, had it at 104, lowered it to 100 and ran OK, yeah I cannot do 950 like on Vantage either __________________ Should I get a Quad- or Dual-Core? - How about joining us in the Benching Lounge for some secrets - Want to bench sub-zero...take a look. Heatware 280-0-0 HWBOT Profile
	QUOTE Thanks

12-09-10, 07:23 PM	#85
dejo Senior Moment Senior Member Join Date: Nov 2001 Location: Tyler, Texas	I never could do vantage at 950 all mine would do is about 935 or sometimes 940 and then 2250 on mem but 3d11 I have to stop mem at 2230. but whats wierd is that I ran my 3d11 runs with pci at 115 __________________ if it screams, crank it. if it cries, kill it Asrock z77 ex6 2600k @4.8ghz Samsung 2x4gb rams OCZ Vertex4 256gb ssd EVGA GTX480 Sparkle 1250 gold PSU Arc Midi case
	QUOTE Thanks

[O/C] Futuremark Release 3DMark 11

Internet Services

Website Development

Tech Hardware

12-09-10, 11:15 PM	#86
Brolloks Benching Senior on Siesta Premium Member #8 Join Date: Dec 2006 Location: Land of Long Horns	HD 5870 (1000/1200) and i7-920 at 4.2 Ghz P5044 3DMarks http://3dmark.com/3dm11/101868 __________________ Should I get a Quad- or Dual-Core? - How about joining us in the Benching Lounge for some secrets - Want to bench sub-zero...take a look. Heatware 280-0-0 HWBOT Profile
	QUOTE Thanks

12-09-10, 11:37 PM	#88
m0r7if3r Member Water Cooling Sticky Reading Enforcement Official Join Date: Jun 2010 Location: Marietta, GA	man...just watching this bench (frickin finals...keepin me from benchin) I can tell it's gonna take some time to get it hammered down. Wonder if the bot will adopt it or not... __________________ If years were seasons, this December would be the December of our December. -Abed #sixseasonsandamovie Heat
	QUOTE Thanks

12-09-10, 11:41 PM	#89
thobel Member Join Date: May 2010 Location: NYC	I7 980 @ 4.4GHz GTX 480 Tri Sli @ 905/2200 ----- P15384 Score http://3dmark.com/3dm11/101640 __________________ CPU: I7 3960X @5000 H2O MOBO: ASUS Rampage 4 Extream H20 RAM: Corsair Dominator 4x2GB 2133 Cl8 (Hypers) Video: Evga Titan Tri Sli H20 Case: Danger Den Custom DoubleWide PSU: Silverstone 1500 LCD: Dell 30" 3007 SSD: 4x Ocz Vertex 4 120 Raid 0 H20: Dual D5 Pumps, EK SLi Serial, BP Pump Top, BP Pump Cover, Frozen Q Reservoir, Lamptron FC2, 3x Blackice GTX 480's 2x Blackice GTX 360's
	QUOTE Thanks

12-10-10, 12:56 AM	#90
lolwut Member Join Date: Jan 2009 Location: Exeter, NH	http://3dmark.com/3dm11/102915 4724 i7 920 @ 4ghz / Radeon 5870 900/1300 __________________ cpu: i7 980x @ 4.2ghz mobo: asus rampage iii extreme ram: 6gb corsair dominator gt @ 2080mhz gpu: 2x evga gtx580 hydro copper 2 storage: 2x ocz vertex 120gb raid0 sound: soundblaster x-fi fatal1ty psu: corsair hx850w case: corsair 800d cooling: 2x custom water loops HEATWARE
	QUOTE Thanks

12-10-10, 03:27 AM	#91
Woomack Senior Memory Guru Premium Member #19 Join Date: Jul 2007 Location: Poznan, Poland	P6170 http://3dmark.com/3dm11/97312 single GTX470@915/2060MHz , i7 950@4.2GHz 260.99 driver / all auto settings with performance profile __________________ Memory tests and reviews Guides: Ivy Bridge Memory Overclocking Guide, GTX400 Bios Mod, How to fix ME in Z77 Other: Biostar I45@600MHz+ FSB, G.Skill/PSC @1523MHz/AMD, 1539MHz/Intel, P6X58D-E@248bclk Last edited by Woomack; 12-10-10 at 03:35 AM.
	QUOTE Thanks

12-10-10, 03:37 AM	#92
sandyduff Great Scot! Member Join Date: Apr 2008 Location: Inverkeithing, SCOTLAND!!!	Does anyone else have problems running the physics test...? I get through all the graphics tests no problem but after it loads the first physics test, the screen just goes blank and nothing happens... I've tried downclocking my cpu slightly, turning off HT, bumping vcore a notch... nothing works.... Fixed... oddly enough it was a driver issue, updated to 10.11 and can run the cpu tests while overclocked... but the dreaded overclocked GPU dual screen flicker is back!! C'mon AMD!! Anyway... P7802 http://3dmark.com/3dm11/106391;jsess...v8Bt5jDtpp2bEt Increased to 4GHz, P7891... not a very big jump... 5970 is at 900/1200 http://3dmark.com/3dm11/106879;jsess...pcm05Results=0 Bumped my core clock to 950MHz and got a bigger jump... P8329 (i7 920@4GHz with HT on, 5970 @950MHz core and 1200MHz RAM) http://3dmark.com/3dm11/107398;jsess...pcm05Results=0 __________________ i7 920 D0 @ 4GHz XSPC Delta V3 Gigabyte x58-UD4 6GB Corsair DDR3 1600MHz 8-8-7-20 Gainward GTX 580 1KW Enermax Galaxy 500GB Samsung Spinpoint F1 and 750GB WD Cavier Green Samdung SA700D 1920x1080 @ 120Hz My steam name is "Sandy Ravage" feel free to add me "we should team up... dandy duff `n double bluff?" Bobbybubblehead Last edited by sandyduff; 12-10-10 at 12:28 PM.
	QUOTE Thanks

12-10-10, 06:22 AM	#93
Angry Join Date: Feb 2001 Location: Bluefield, WV	Athlon II 630 X4 @ 3.3ghz DDR3 @ 1500 w/ 5770 = 2325 Athlon II 620 x4 @ 3.2ghz DDR2 @ 1000 w/ 5830 = 2653 Just playing with it, and a system I built for a family member. :edit: Wow... Oc'ed my 5830 to 900/1200 and got 2856. Man, too bad I cant crossfire the 5770 with my 5830 for a bit of more fun. __________________ Main Rig.......................Game Server.........................Media Server..............Untangle Core i3 2100 ....... ........Phenom II X4 965...................Athlon II X4 620....... Athlon X2 2350-BE 2.1ghz MSI P67A-GD65 ..............Asus M4A79XTD........................GA-890GX.................MSI 785GTM-45 G.Skill 1333 4x2gb............16gb Partriot S5 DDR3 1333.......4gb DDR3 1600...........4gb OCZ DDR2 1066 EVGA GTX 670 FTW SLI........2x EVGA GTX 550Ti.........................Onboard 890gx 60gb OCZ Summit.................4x250gb WD RE Raid0 ViewSonic VX2453mh-LED Last edited by Angry; 12-10-10 at 06:33 AM.
	QUOTE Thanks

12-10-10, 10:09 AM	#94
Hardass Senior Member Join Date: Nov 2001 Location: S.W. Florida.	I7 950 @4.4 GTX 480 @ 880/2000 P6464 http://3dmark.com/3dm11/110809 __________________
	QUOTE Thanks

12-10-10, 10:39 AM	#95
cold.nut Member Join Date: Sep 2009 Location: Utah	need 3DMark 11! christmas presents put me all out of my money __________________ HeatWare "If you aren't having fun, then you're doing it wrong!"
	QUOTE Thanks

12-10-10, 10:48 AM	#96
EarthDog Senior PITA Member Overclockers.com Editor Join Date: Dec 2008 Location: Stuck in Maryland...	Benching the other free ones to get your 10 in are free!!! __________________ Should I R0 my SSD? / SandyBridge / Ivybridge Overclocking Guide / AMD Overclocking Guide / Power Supply Guide SSD Reliability/Write Endurance / JOIN THE BENCHING TEAM! / Bulldozer Overclocking Guide / Forum Etiquette Want to see your writing featured on the overclockers.com Front Page? PM me, I can help! "We have more information and more ways of accessing it than ever, yet seem increasingly less inclined to do so."- Michael Wilbon
	QUOTE Thanks

12-10-10, 10:50 AM	#97
cold.nut Member Join Date: Sep 2009 Location: Utah	don't tempt me Earth.. nah, pot comes in for christmas. so christmas break i will officially join! __________________ HeatWare "If you aren't having fun, then you're doing it wrong!"
	QUOTE Thanks

12-10-10, 12:20 PM	#99
eva2000 Member Join Date: Aug 2002 Location: Brisbane, Australia	Interesting no cpu scaling and no tri-crossfire scaling yet it seems First time retail 980X 3013A489 clocks with single HD5870 at 4.0Ghz vs 4.2Ghz @1025/1263 - 6pts diff LOL 2x HD5870 CFX @1025/1250 = 9,055 http://3dmark.com/3dm11/89609 @1030/1250 = 9,081 http://3dmark.com/3dm11/89972 Tried 3x HD5870 @1000/1250 at 4.2ghz first Extreme Preset __________________ Memory Addict
	QUOTE Thanks

12-10-10, 01:34 PM	#100
dejo Senior Moment Senior Member Join Date: Nov 2001 Location: Tyler, Texas	very nice Eva. been a while since I seen you around. how ya been. __________________ if it screams, crank it. if it cries, kill it Asrock z77 ex6 2600k @4.8ghz Samsung 2x4gb rams OCZ Vertex4 256gb ssd EVGA GTX480 Sparkle 1250 gold PSU Arc Midi case
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search