Frosty Pics

David · 03-20-12, 04:51 PM

Yeah, I was struggling to find enough bench space in the lab. to be honest. I was planning on using a spare fume hood to keep the thing really well vented, but one had P₂S₅/alumina in it (fatal by inhalation; 100 ppm causes pulmonary embolism) and the other had dimethyl sulfate in it (a known carcinogen and mutagen) so I didn't go there ...

Bobnova · 03-20-12, 05:16 PM

mmph, 100ppm isn't exactly a lot. I think you made the right choice.

I.M.O.G. · 03-20-12, 05:34 PM

Quote:

Originally Posted by TsunamiJuan

i like that shelf setup for the power supply

I see you like danger. I could see that falling, ouch.

Dolk · 03-21-12, 09:39 AM

Quote:

Originally Posted by David

Yeah, I was struggling to find enough bench space in the lab. to be honest. I was planning on using a spare fume hood to keep the thing really well vented, but one had P₂S₅/alumina in it (fatal by inhalation; 100 ppm causes pulmonary embolism) and the other had dimethyl sulfate in it (a known carcinogen and mutagen) so I didn't go there ...

sometimes you have to risk death to get be the best

Dolk · 03-22-12, 09:23 PM

Janus67 · 03-22-12, 09:38 PM

Venom pot strikes again!

TsunamiJuan · 03-23-12, 12:25 AM

yeah thats what i am talking about

If its not under ice, its not being done right

JJJC · 04-08-12, 10:11 AM

First post. Thought it would be fitting that I introduce myself with some frosty pics.

The board wasn't powered on here, but I do love that shot.

Janus67 · 04-08-12, 10:14 AM

I love a good frozen board in the morning

I.M.O.G. · 04-08-12, 04:24 PM

Nice shots jjjc!

legoz_mighty · 04-26-12, 02:29 PM

Quote:

Originally Posted by Dolk

Does this make the motherboard dead?
I'm quite noob at extreme cooling

Janus67 · 04-26-12, 02:35 PM

Quote:

Originally Posted by legoz_mighty

Does this make the motherboard dead?
I'm quite noob at extreme cooling

Everything was unplugged, it should be fine

Bobnova · 04-26-12, 02:46 PM

Water + electron movement = death.
Water + no electron movement = non-death.

Just have to be really sure it is dry before you fire it up again.
I usually do that by heating the board up to 140-170*f for a while, water doesn't stick around at those temps very long.

Janus67 · 06-06-12, 08:11 AM

From the weekend of May 20th:

3770k + 580 Matrix

Couple pics from last night (3770k + MSI 7970 Lightning):

Conformaled motherboard (drying outside)

Work in progress!

Will hopefully have the GPU under LN2 either tonight or tomorrow. I think I have about 20-25L left.

gregmacknass · 06-21-12, 07:27 PM

Here's a few of my money shots. Some very heavy ice buildup for just dry ice.

manu2b · 06-21-12, 07:42 PM

Did you save some D-Ice for the Vodka?

Janus67 · 06-21-12, 07:54 PM

or did you run out of acetone at the last minute?

ballsy putting the vodka on your PSU!

gregmacknass · 06-21-12, 08:22 PM

Quote:

Originally Posted by Janus67

or did you run out of acetone at the last minute?

ballsy putting the vodka on your PSU!

It was only sitting there for a minute or so, and the psu doesn't run hot anyway.

Bobnova · 06-21-12, 09:55 PM

Crazy amount of ice there for DIce.
You need better vodka :P

gregmacknass · 06-21-12, 10:19 PM

Quote:

Originally Posted by Bobnova

Crazy amount of ice there for DIce.
You need better vodka :P

Yeah, I couldn't believe how much ice built up on the pot. Yeah the psu has a drinking problem, so we buy it the cheapest stuff we can. I keep telling it that it's not safe for it to be drinking, but it just can't seem to put the bottle down. It's actually my roommates, I am a whiskey guy myself.

03-20-12, 04:51 PM	#481
David Forums Super Moderator Overclockers.com Lead Editor Join Date: Feb 2001 Location: Hiding from Americans and making pretty colours in a drybox in St Andrews	Yeah, I was struggling to find enough bench space in the lab. to be honest. I was planning on using a spare fume hood to keep the thing really well vented, but one had P₂S₅/alumina in it (fatal by inhalation; 100 ppm causes pulmonary embolism) and the other had dimethyl sulfate in it (a known carcinogen and mutagen) so I didn't go there ... __________________ David J. Nelson MChem(Edin) PhD(Strath) AMRSC [Academia Profile] OC Forums Super Moderator // Overclockers.com Editor The Workhorse: [Lenovo W510] Intel Core i7-720QM / 8 GB DDR3 / nVidia Quadro FX880M / Crucial M4 256 GB SSD / Windows 7 The HTPC/Server: AMD Phenom X4 9650 / 6 GB DDR2 / nVidia 8300 / 5 TB of HDDs / Antec Solo II Case / Windows 7 The Gaming Rig: AMD Llano A6-3650 / 4 GB DDR3 / nVidia GTX260 / 2x 500 GB HDD in RAID0 / Antec Dark Fleet DF-85 Case / Windows 7 The Benchmarking Setup: Various LGA775 chips / Asus Rampage Formula / 2 GB OCZ 1066 MHz DDR2 / nVidia Quadro NVS 285 / 320 GB HDD / Windows 7 My research fellowship is eating all my time, so I may be slow to reply to emails and private messages.
	QUOTE Thanks

03-20-12, 05:16 PM	#482
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	mmph, 100ppm isn't exactly a lot. I think you made the right choice. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

03-22-12, 09:23 PM	#485
Dolk I once overclocked an Intel in a nightmare and it was HORRIBLE Senior OCF's Plaything Join Date: Mar 2008 Location: St. Louis MO	__________________ （╯°v°）╯︵ ┻━┻ currently has .2738428927348 internets create your own rules to find the answer be proud of the pink stars Earthdog: New codename for SB for extreme overclockers... BLEH. Phenom II Result Thread Phenom II Guide Llano Result Thread
	QUOTE Thanks

03-22-12, 09:38 PM	#486
Janus67 Benching Team Leader Wannabe Admin Senior Join Date: May 2005 Location: Ohio State	Venom pot strikes again! __________________ Ivy Bridge Benching and Gaming: Asus Maximus V Extreme 0010 BIOS : Intel i7 3770k w/ Phanteks PH-TC14 : 8GB 2x4GB G.Skill TridentX DDR3-2666 : MSI 7970 Lightning Edition Other Benched Hardware: GA-EX58a-UD3R; Rampage Extreme; Rampage Formula; GA-EP45-UD3R; P5K-Deluxe; MIVE -- 2500k; 2600k; 920; E6300; E6550; E6600; E8400; Q6600 -- 6950; 4870; 8800GTS Other Components: Crucial M4 128GB SSD : 2x1TB Samsung F3 in Raid0 : Silverstone Strider Gold 1250W : Auria EQ276W 27'' & Dell 2407FPW : KPC Tek9 Fat and Gemini LN2 Pots Benchmark, Win Prizes - In the Overclocktagon!
	QUOTE Thanks

03-23-12, 12:25 AM	#487
TsunamiJuan Member Join Date: Mar 2011 Location: Soviet Mexico	yeah thats what i am talking about If its not under ice, its not being done right __________________ Get the hot dogs out, this baby's going up in Flames!!! Keeper Of The VaseAtone™ Bobnova: humans need SMART functionality Deanzo: Matts hat is too high a res for the video feed, that is the issue Currently Doing Stupid OC tricks with A10 5800k @ A85X chipset Asus M4N82 nforce980a mb, Phenom II 940 be @ 6000.1mhz (Bobnova'd) , 4gb DDR2 1066 Gigabyte a75-ud4h , 3870k @ 6016.7mhz, 2.358vcore Asus MIVE, i7 2600k @ 5899.7mhz Benching Rig RIP Died doing what it did best ASUS MIVE, i7 2600k @ 5.2ghz 1.49vcore, noctua NH-D14 2000 AMD e350 Cold Fusion - IceCream Special Ln2 Pot (the most fun you can have 130$ and ln2)
	QUOTE Thanks

Frosty Pics

Internet Services

Website Development

Tech Hardware

04-08-12, 10:11 AM	#488
JJJC New Member Join Date: Nov 2011 Location: Perth, Australia	First post. Thought it would be fitting that I introduce myself with some frosty pics. The board wasn't powered on here, but I do love that shot.
	QUOTE Thanks

04-08-12, 10:14 AM	#489
Janus67 Benching Team Leader Wannabe Admin Senior Join Date: May 2005 Location: Ohio State	I love a good frozen board in the morning __________________ Ivy Bridge Benching and Gaming: Asus Maximus V Extreme 0010 BIOS : Intel i7 3770k w/ Phanteks PH-TC14 : 8GB 2x4GB G.Skill TridentX DDR3-2666 : MSI 7970 Lightning Edition Other Benched Hardware: GA-EX58a-UD3R; Rampage Extreme; Rampage Formula; GA-EP45-UD3R; P5K-Deluxe; MIVE -- 2500k; 2600k; 920; E6300; E6550; E6600; E8400; Q6600 -- 6950; 4870; 8800GTS Other Components: Crucial M4 128GB SSD : 2x1TB Samsung F3 in Raid0 : Silverstone Strider Gold 1250W : Auria EQ276W 27'' & Dell 2407FPW : KPC Tek9 Fat and Gemini LN2 Pots Benchmark, Win Prizes - In the Overclocktagon!
	QUOTE Thanks

04-08-12, 04:24 PM	#490
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	Nice shots jjjc!
	QUOTE Thanks

04-26-12, 02:46 PM	#493
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	Water + electron movement = death. Water + no electron movement = non-death. Just have to be really sure it is dry before you fire it up again. I usually do that by heating the board up to 140-170f for a while, water doesn't stick around at those temps very long. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter.* 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

06-06-12, 08:11 AM	#494
Janus67 Benching Team Leader Wannabe Admin Senior Join Date: May 2005 Location: Ohio State	From the weekend of May 20th: 3770k + 580 Matrix Couple pics from last night (3770k + MSI 7970 Lightning): Conformaled motherboard (drying outside) Work in progress! Will hopefully have the GPU under LN2 either tonight or tomorrow. I think I have about 20-25L left. __________________ Ivy Bridge Benching and Gaming: Asus Maximus V Extreme 0010 BIOS : Intel i7 3770k w/ Phanteks PH-TC14 : 8GB 2x4GB G.Skill TridentX DDR3-2666 : MSI 7970 Lightning Edition Other Benched Hardware: GA-EX58a-UD3R; Rampage Extreme; Rampage Formula; GA-EP45-UD3R; P5K-Deluxe; MIVE -- 2500k; 2600k; 920; E6300; E6550; E6600; E8400; Q6600 -- 6950; 4870; 8800GTS Other Components: Crucial M4 128GB SSD : 2x1TB Samsung F3 in Raid0 : Silverstone Strider Gold 1250W : Auria EQ276W 27'' & Dell 2407FPW : KPC Tek9 Fat and Gemini LN2 Pots Benchmark, Win Prizes - In the Overclocktagon!
	QUOTE Thanks

06-21-12, 07:27 PM	#495
gregmacknass Member Join Date: Feb 2010 Location: Indiana	Here's a few of my money shots. Some very heavy ice buildup for just dry ice. Attached Images __________________ Gigabyte GA-Z77X-UD5H I7 3770K 4.8 1.42v on water D-TEK Fusion V2 4x2GB OCZ EVGA GTX 295 CO-OP 1.21v 800/1250/1600 EK full cover front and back block Antec EA750 55" Toshiba 55WX800U LED 1080P monitor
	QUOTE Thanks

06-21-12, 07:42 PM	#496
manu2b Join Date: Feb 2011 Location: Brussels	Did you save some D-Ice for the Vodka? __________________ MSI 990FXA-GD65 PhenomII x6 1075t 4.2GHz/1.56v Noctua NH-D14 2x4GB Corsair Vengeance 1866/Cl9/1.57v Sapphire 7970 Dual-x@1225(1.32v)/1800(1.6v) BeQuiet Pure Power 530W Crucial M4 256GB Samsung SyncMaster BX2450 24"
	QUOTE Thanks

06-21-12, 07:54 PM	#497
Janus67 Benching Team Leader Wannabe Admin Senior Join Date: May 2005 Location: Ohio State	or did you run out of acetone at the last minute? ballsy putting the vodka on your PSU! __________________ Ivy Bridge Benching and Gaming: Asus Maximus V Extreme 0010 BIOS : Intel i7 3770k w/ Phanteks PH-TC14 : 8GB 2x4GB G.Skill TridentX DDR3-2666 : MSI 7970 Lightning Edition Other Benched Hardware: GA-EX58a-UD3R; Rampage Extreme; Rampage Formula; GA-EP45-UD3R; P5K-Deluxe; MIVE -- 2500k; 2600k; 920; E6300; E6550; E6600; E8400; Q6600 -- 6950; 4870; 8800GTS Other Components: Crucial M4 128GB SSD : 2x1TB Samsung F3 in Raid0 : Silverstone Strider Gold 1250W : Auria EQ276W 27'' & Dell 2407FPW : KPC Tek9 Fat and Gemini LN2 Pots Benchmark, Win Prizes - In the Overclocktagon!
	QUOTE Thanks

06-21-12, 09:55 PM	#499
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	Crazy amount of ice there for DIce. You need better vodka :P __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search