Live Benching - Get Your Session on the Front Page!

Convicted1 · 05-01-12, 06:39 PM

Well... Gonna have to cancel for tonight...

Nothing but air in the LN2 tank.... I figured since the gauge still showed pressure that there would be some left in it... But evidently not.

Sorry guys... I'll try to get some LN2 tomorrow.

I.M.O.G. · 05-01-12, 09:19 PM

I should be up in about ten minutes...

Convicted1 · 05-01-12, 09:22 PM

Sweet!

I.M.O.G. · 05-01-12, 09:22 PM

www.livestream.com/overclockers

Going to come back at the coldbug issues I had yesterday, messing with bclk and CPU PLL to see if I can work things out.

I.M.O.G. · 05-01-12, 11:44 PM

Done for the night, grabbed a couple quick wprime runs, but couldn't work around cold bug issues at all, so I didn't press the chip any harder:
http://hwbot.org/submission/2279684_
http://hwbot.org/submission/2279683_

Brolloks · 05-02-12, 08:35 AM

Good work Matt, how did you overcome the CB?

I.M.O.G. · 05-02-12, 09:10 AM

I didn't. I just booted warmer than -75C, and I didn't let the chip get colder than -100C. Nothing I did that is recommended commonly out there had any impact on the CB/CBB... I didn't bother to run any more benches, as I plan to find a better (full pot) IB. I was pretty conservative with the voltages and trying stuff, wanted to sell it without it being all beat up, but I posted what I tried in the other thread:

Quote:

Originally Posted by I.M.O.G.

SR0PL Batch# L206A973 5.72GHz at 1.75V would do wp32 and wp1024:
http://hwbot.org/submission/2279683_
http://hwbot.org/submission/2279684_

Cold boot bugs at -75C, cold bugs around -105C. Tested CPU PLL from 1.7V to 1.95V (default read 1.812 in BIOS). Tested bclk from 105-110, trouble getting higher bclk to post. Tested CPU voltage from 1.0V to 1.75V. None of these items, with or without LN2 mode enabled on the MVG, made any difference at all upon the cold bug behavior of the chip from what I found.

I did not test RAM. Really only tested cold bug behavior, and once I found I couldn't work around it with anything I was trying, I didn't want to press the chip any harder.

Looking to get another from a different store (and hopefully different batch) in the next week or two and will report back.

Janus67 · 05-02-12, 09:39 AM

@IMOG just saw this posted this morning by Shammy

Quote:

Originally Posted by Shammy

BIOS 0074:
http://www.datafilehost.com/download-76359c05.html

Updates dram tuning, memory presets
fix 6950 flash to 6970 bootup issue
fix rog connect show dram voltage wrongly
adds cpu ratio adjust to rog connect

pending fix: high Frequency 2Dimm/Chanel with Command Rate 1T

Maybe that will help.

TURN & BURN · 05-04-12, 12:54 PM

Going LIVE again tonight should be around 7PM EST or so this time w Gig UD5H WB 3770K different chipper

Hope to get over the 6.0 stable to do some 3D work with 2x7970 Gig OC cards.

T&B

SF101 · 05-04-12, 02:11 PM

nice I'm excited for this!

moocow · 05-04-12, 11:33 PM

Wheres the link?!

SF101 · 05-04-12, 11:49 PM

its the same one imog used.. but hes gone already suposed to come back? i hopes

I.M.O.G. · 05-05-12, 01:08 PM

Live tonight, I believe at 8pm eastern. WWW.livestream.com/overclockers

Should be going up against convicted on a Pentium 641. Head to head for CPU freq, wprime32, and superpi32m.

dejo · 05-05-12, 01:09 PM

boing. will try to show up

TURN & BURN · 05-05-12, 02:48 PM

I think I got the UD5H running right and have 10LT or so LN2 left so I will be going back at it again but you guys are going live so maybe ill run late or just bench.

Convicted1 · 05-05-12, 02:57 PM

Quote:

Originally Posted by I.M.O.G.

Live tonight, I believe at 8pm eastern. WWW.livestream.com/overclockers

Should be going up against convicted on a Pentium 641. Head to head for CPU freq, wprime32, and superpi32m.

Yep!

And I'll be on my stream @ www.livestream.com/convicted1

T&B... Might go ahead and sign up for a Livestream account!... It'd be a new record to have 3 Livestreams going at once I think! LOL

Convicted1 · 05-05-12, 03:06 PM

I'll actually be live in about 30 minutes for anybody who wants to watch the boring OS install and such.

Convicted1 · 05-05-12, 05:01 PM

That went quicker than I thought it would...

So I'll prolly end up taking a break here and getting dinner out the way.

I'll be back at 7 Central though!

See ya'll then.

BTW Matt.... P4 is a completely different animal than C2D... You may want to take a few minutes to get familiar with the BIOS... I had to just to do my OS install.

I.M.O.G. · 05-05-12, 05:19 PM

I am gonna get something going here shortly, make sure the OS still works and stuff on the Rex.

I don't know what I am doing on p4 or c2d hardly, so its all the same to me!

TURN & BURN · 05-05-12, 06:17 PM

Quote:

Originally Posted by Convicted1

Yep!

And I'll be on my stream @ www.livestream.com/convicted1

T&B... Might go ahead and sign up for a Livestream account!... It'd be a new record to have 3 Livestreams going at once I think! LOL

New Livestream Producer Account is this the type acct you have?

05-01-12, 06:39 PM	#301
Convicted1 Premium Member #2 Join Date: Jul 2011 Location: Lake of the Ozarks, Mo	Well... Gonna have to cancel for tonight... Nothing but air in the LN2 tank.... I figured since the gauge still showed pressure that there would be some left in it... But evidently not. Sorry guys... I'll try to get some LN2 tomorrow. __________________ xXSebaSXx: "Fan reviews are easy. Spin up to full speed, stick finger into spinning blades. If blades break and finger remains the fan is no good; if the other way around happens then fan is a keeper." Bobnova: "I went squeeeeee like a teenager with the new muave Pokemon when I saw that foam..." I.M.O.G.: "CPU and GPU are at -10C, and there's water everywhere. Meh, windows updates are slightly less boring when done underwater." My Heat My HWBOT
	QUOTE Thanks

05-01-12, 09:19 PM	#302
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	I should be up in about ten minutes...
	QUOTE Thanks

05-01-12, 09:22 PM	#303
Convicted1 Premium Member #2 Join Date: Jul 2011 Location: Lake of the Ozarks, Mo	Sweet! __________________ xXSebaSXx: "Fan reviews are easy. Spin up to full speed, stick finger into spinning blades. If blades break and finger remains the fan is no good; if the other way around happens then fan is a keeper." Bobnova: "I went squeeeeee like a teenager with the new muave Pokemon when I saw that foam..." I.M.O.G.: "CPU and GPU are at -10C, and there's water everywhere. Meh, windows updates are slightly less boring when done underwater." My Heat My HWBOT
	QUOTE Thanks

05-01-12, 09:22 PM	#304
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	www.livestream.com/overclockers Going to come back at the coldbug issues I had yesterday, messing with bclk and CPU PLL to see if I can work things out. __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

05-01-12, 11:44 PM	#305
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	Done for the night, grabbed a couple quick wprime runs, but couldn't work around cold bug issues at all, so I didn't press the chip any harder: http://hwbot.org/submission/2279684_ http://hwbot.org/submission/2279683_ __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

Live Benching - Get Your Session on the Front Page!

Internet Services

Website Development

Tech Hardware

05-02-12, 08:35 AM	#306
Brolloks Benching Senior on Siesta Premium Member #8 Join Date: Dec 2006 Location: Land of Long Horns	Good work Matt, how did you overcome the CB? __________________ Should I get a Quad- or Dual-Core? - How about joining us in the Benching Lounge for some secrets - Want to bench sub-zero...take a look. Heatware 280-0-0 HWBOT Profile
	QUOTE Thanks

05-04-12, 12:54 PM	#309
TURN & BURN Member Join Date: Jan 2006 Location: Florida	LIVE LN2 3770K w GIG UD5H WB 7PM EST or so Going LIVE again tonight should be around 7PM EST or so this time w Gig UD5H WB 3770K different chipper Hope to get over the 6.0 stable to do some 3D work with 2x7970 Gig OC cards. T&B __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller
	QUOTE Thanks

05-04-12, 02:11 PM	#310
SF101 The Printer Guru Join Date: Feb 2002 Location: canada alberta	nice I'm excited for this! __________________ My 3 Current Rigs-Guest-Main-Work I7930@4.0ghz 3770K@ 4.8ghz 2500k @ 4.7ghz SF101 HW BOT Join the Bench Team!
	QUOTE Thanks

05-04-12, 11:33 PM	#311
moocow Join Date: May 2003 Location: Texas State	Wheres the link?! __________________ YAY HWBOT! [heatware]
	QUOTE Thanks

05-04-12, 11:49 PM	#312
SF101 The Printer Guru Join Date: Feb 2002 Location: canada alberta	its the same one imog used.. but hes gone already suposed to come back? i hopes __________________ My 3 Current Rigs-Guest-Main-Work I7930@4.0ghz 3770K@ 4.8ghz 2500k @ 4.7ghz SF101 HW BOT Join the Bench Team!
	QUOTE Thanks

05-05-12, 01:08 PM	#313
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	Live tonight, I believe at 8pm eastern. WWW.livestream.com/overclockers Should be going up against convicted on a Pentium 641. Head to head for CPU freq, wprime32, and superpi32m.
	QUOTE Thanks

05-05-12, 01:09 PM	#314
dejo Senior Moment Senior Member Join Date: Nov 2001 Location: Tyler, Texas	boing. will try to show up __________________ if it screams, crank it. if it cries, kill it Asrock z77 ex6 2600k @4.8ghz Samsung 2x4gb rams OCZ Vertex4 256gb ssd EVGA GTX480 Sparkle 1250 gold PSU Arc Midi case
	QUOTE Thanks

05-05-12, 02:48 PM	#315
TURN & BURN Member Join Date: Jan 2006 Location: Florida	I think I got the UD5H running right and have 10LT or so LN2 left so I will be going back at it again but you guys are going live so maybe ill run late or just bench. __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller
	QUOTE Thanks

05-05-12, 03:06 PM	#317
Convicted1 Premium Member #2 Join Date: Jul 2011 Location: Lake of the Ozarks, Mo	I'll actually be live in about 30 minutes for anybody who wants to watch the boring OS install and such. __________________ xXSebaSXx: "Fan reviews are easy. Spin up to full speed, stick finger into spinning blades. If blades break and finger remains the fan is no good; if the other way around happens then fan is a keeper." Bobnova: "I went squeeeeee like a teenager with the new muave Pokemon when I saw that foam..." I.M.O.G.: "CPU and GPU are at -10C, and there's water everywhere. Meh, windows updates are slightly less boring when done underwater." My Heat My HWBOT
	QUOTE Thanks

05-05-12, 05:01 PM	#318
Convicted1 Premium Member #2 Join Date: Jul 2011 Location: Lake of the Ozarks, Mo	That went quicker than I thought it would... So I'll prolly end up taking a break here and getting dinner out the way. I'll be back at 7 Central though! See ya'll then. BTW Matt.... P4 is a completely different animal than C2D... You may want to take a few minutes to get familiar with the BIOS... I had to just to do my OS install. __________________ xXSebaSXx: "Fan reviews are easy. Spin up to full speed, stick finger into spinning blades. If blades break and finger remains the fan is no good; if the other way around happens then fan is a keeper." Bobnova: "I went squeeeeee like a teenager with the new muave Pokemon when I saw that foam..." I.M.O.G.: "CPU and GPU are at -10C, and there's water everywhere. Meh, windows updates are slightly less boring when done underwater." My Heat My HWBOT
	QUOTE Thanks

05-05-12, 05:19 PM	#319
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	I am gonna get something going here shortly, make sure the OS still works and stuff on the Rex. I don't know what I am doing on p4 or c2d hardly, so its all the same to me!
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search