3770K GIGABYTE UD5H WB 4.7OC 1.21v H-100

TURN & BURN · 04-28-12, 10:48 AM

Hi all my ambient temps were 82F when I did these runs but more so I want to say the UD5H is a rock solid board with simple OC and would recomend it. I will be running either DICE or LN2 as well to see what I can get out of it. Also there are screens of the BIOS settings below benching

Specs
Gigabyte Z77X UD5H WB
3770K@4.7 1.21v draw
Corsair H-100
Team Extreme 2400 LV
7970 stock
open bench

BIOS SETTING SCREENS

Will get back with more but like with the Z77 UD3H this board is rock solid as well easy stable OC nd would recomend it!!

T&B

diaz · 04-28-12, 11:17 AM

Sweet! Will read later.. temps looking good stresstest vs 3d test..

Don Karnage · 04-28-12, 03:26 PM

Very nice. My 3570K is a horrible overclocker. Needs 1.36v for 4.7. I'll probably order another one from the egg tomorrow

Robmoo · 04-28-12, 05:37 PM

If only I could get my hands on a IB. :-(

Rattle · 04-28-12, 06:02 PM

nice chip i hope I get one like that, I have the same mobo does that count?

watchthisspace · 04-28-12, 06:04 PM

I'm thinking of the UD3H as the price for a UD5H is waaaay out of my budget. But I've got one question;

How fast does the post?? I have a friend with an old P45 Gigabyte board and it goes through bios and then all these other things before Windows will finally load. Where as my current Asus P45 board only has to post, the old BIOS hard drive detection and then that's it.

TURN & BURN · 04-28-12, 06:28 PM

Quote:

Originally Posted by watchthisspace

I'm thinking of the UD3H as the price for a UD5H is waaaay out of my budget. But I've got one question;

How fast does the post?? I have a friend with an old P45 Gigabyte board and it goes through bios and then all these other things before Windows will finally load. Where as my current Asus P45 board only has to post, the old BIOS hard drive detection and then that's it.

How fast can you BLINK?

watchthisspace · 04-28-12, 06:33 PM

Quote:

Originally Posted by TURN & BURN

How fast can you BLINK?

I'm a pretty fast blinker

TURN & BURN · 04-28-12, 06:38 PM

Quote:

Originally Posted by watchthisspace

I'm a pretty fast blinker

Then you might catch the pretty little colors for a nano second

all aside it boots within 15 seconds or so and I like both the UD3H and UD5H the point being Gigabyte has returned in force with very stable boards!!

I should have the G1 Sniper next week I hope and see how the 2x16 fairs....

T&B

TURN & BURN · 04-29-12, 06:15 AM

Did a quick LINX

Bobnova · 04-29-12, 09:13 AM

I've found Z77 boards in general to POST very fast.

diaz · 04-29-12, 10:37 AM

Quote:

Originally Posted by Bobnova

I've found Z77 boards in general to POST very fast.

About dang time. How long has post been around? My P55 takes forever, its a super PITA for boot times especially when I have an SSD.

TURN & BURN · 04-29-12, 11:48 AM

yes all my Z77 boards post fast about 15 seconds or so!

Koler69 · 04-29-12, 04:22 PM

Turn and Burn, are you gonna test the sniper 3? If so where are you getting your board from? I can't find the sniper 3 in stock anywhere. Newegg does have the M3 in stock though. But I don't want micro atx.

TURN & BURN · 04-29-12, 04:51 PM

Quote:

Originally Posted by Koler69

Turn and Burn, are you gonna test the sniper 3? If so where are you getting your board from? I can't find the sniper 3 in stock anywhere. Newegg does have the M3 in stock though. But I don't want micro atx.

Boards are coming from Gigabyte

hope to have it this week early!!! I want to see how the 2x16 lanes run.

TURN & BURN · 05-01-12, 05:27 AM

Seems to be a lot of ppl running the 3770K up to about 5 GHz on water and xtreme cooling I hear cold bugs? I ran on DICE and manage 5.7 stable, I did post on my UD3H thread that above 68c I was running into a CB on and off, as long as I didnt get into a freeze screen, not a issue but if you do or like I did I would have to scrapo the OC and start from 4.5 working back up just a FYI if your having issues with LN2 ect.

I will be going LN2 Thursday or Friday try to run stable 6GHz up.

Melhisedek · 05-04-12, 04:42 PM

Quote:

Originally Posted by Don Karnage

Very nice. My 3570K is a horrible overclocker. Needs 1.36v for 4.7. I'll probably order another one from the egg tomorrow

Mate, I need 1.32 for 4.5

xympa · 06-12-12, 10:56 AM

I'm planning on running a setup like this (UD5H + 3770k + H100)... My question is whether this chip is special or should all 3770ks handle like this? I'm still undecided whether to get a 3770k or a 2700k...

Bobnova · 06-12-12, 11:10 AM

My 3770k certainly won't. 4.5GHz takes 1.3v, 4.7 takes almost 1.4v.

xympa · 06-12-12, 11:14 AM

Whats the limit if I want to keep it running for a few more years?

Too much voltage will degrade the cpu or is it only heat that cause the degradation? (By degradation I mean loss of life expectancy)

04-28-12, 10:48 AM	Thread Starter #1
TURN & BURN Member Join Date: Jan 2006 Location: Florida	3770K GIGABYTE UD5H WB 4.7OC 1.21v H-100 Hi all my ambient temps were 82F when I did these runs but more so I want to say the UD5H is a rock solid board with simple OC and would recomend it. I will be running either DICE or LN2 as well to see what I can get out of it. Also there are screens of the BIOS settings below benching Specs Gigabyte Z77X UD5H WB 3770K@4.7 1.21v draw Corsair H-100 Team Extreme 2400 LV 7970 stock open bench BIOS SETTING SCREENS Will get back with more but like with the Z77 UD3H this board is rock solid as well easy stable OC nd would recomend it!! T&B __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller
	QUOTE Thanks

04-28-12, 11:17 AM	#2
diaz Member Join Date: Aug 2007 Location: Canada	Sweet! Will read later.. temps looking good stresstest vs 3d test.. __________________ \m/ OverClockers mATX L33T Club \m/ >>>JOIN NOW<<< Main Rig i5 3570k EVGA GTX 680 Asus Maximus V Gene mATX Silverstone TJ08E mATX 16G Corsair Vengeance Corsair H80 Silverstone Strider Plus 850 Crucial M4 256G SSD // Seagate 750G 7200.12 Storage Recommended PSU's - True/Tested/***/Intel C2D/Q/X Thermal Designs Explained Heatware
	QUOTE Thanks

04-28-12, 03:26 PM	#3
Don Karnage Member Join Date: Apr 2012	Very nice. My 3570K is a horrible overclocker. Needs 1.36v for 4.7. I'll probably order another one from the egg tomorrow __________________ Core I5 3570K @ 4.5Ghz 1.26v Asus Z77 Maximus V G.Skill 8GB DDR3 2800 10-11-11-31 1.60v MCW82 WaterCooled Vanilla EVGA GTX 670 Intel 320 120GB SSD Corsair AX1200 Venom X
	QUOTE Thanks

04-28-12, 05:37 PM	#4
Robmoo Member Join Date: Aug 2005	If only I could get my hands on a IB. :-(
	QUOTE Thanks

04-28-12, 06:02 PM	#5
Rattle Member Join Date: May 2005 Location: Home... again	nice chip i hope I get one like that, I have the same mobo does that count? __________________ Mpower Max \| 4770k \| H100 \| 16gb Sammy 30nm 1866 \| GTX780 SC \| Xonar Essence Stx \| BIC DV62si \| ATH AD700 \| 550d \| AX850 \| VG24QE \| 840pro 256gb \| 640black \| 2tb \| CherryReds \| m60 \| Func1030 \| HEAT
	QUOTE Thanks

3770K GIGABYTE UD5H WB 4.7OC 1.21v H-100

Internet Services

Website Development

Tech Hardware

04-28-12, 06:04 PM	#6
watchthisspace Member Join Date: Jun 2006 Location: Christchurch, New Zealand	I'm thinking of the UD3H as the price for a UD5H is waaaay out of my budget. But I've got one question; How fast does the post?? I have a friend with an old P45 Gigabyte board and it goes through bios and then all these other things before Windows will finally load. Where as my current Asus P45 board only has to post, the old BIOS hard drive detection and then that's it. __________________ Cpu:Intel Q6600 @ 3.2ghz - Thermalright Ultima-90 Motherboard:Asus P5Q Pro RAM:Corsair 2X2g + 2x1G 1066mhz Video:Gigabyte 560 ti OC
	QUOTE Thanks

04-29-12, 06:15 AM	Thread Starter #10
TURN & BURN Member Join Date: Jan 2006 Location: Florida	Did a quick LINX __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller
	QUOTE Thanks

04-29-12, 09:13 AM	#11
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	I've found Z77 boards in general to POST very fast. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

04-29-12, 11:48 AM	Thread Starter #13
TURN & BURN Member Join Date: Jan 2006 Location: Florida	yes all my Z77 boards post fast about 15 seconds or so! __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller
	QUOTE Thanks

04-29-12, 04:22 PM	#14
Koler69 New Member Join Date: Apr 2011	Turn and Burn, are you gonna test the sniper 3? If so where are you getting your board from? I can't find the sniper 3 in stock anywhere. Newegg does have the M3 in stock though. But I don't want micro atx.
	QUOTE Thanks

05-01-12, 05:27 AM	Thread Starter #16
TURN & BURN Member Join Date: Jan 2006 Location: Florida	Seems to be a lot of ppl running the 3770K up to about 5 GHz on water and xtreme cooling I hear cold bugs? I ran on DICE and manage 5.7 stable, I did post on my UD3H thread that above 68c I was running into a CB on and off, as long as I didnt get into a freeze screen, not a issue but if you do or like I did I would have to scrapo the OC and start from 4.5 working back up just a FYI if your having issues with LN2 ect. I will be going LN2 Thursday or Friday try to run stable 6GHz up. __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller
	QUOTE Thanks

06-12-12, 10:56 AM	#18
xympa Registered Join Date: Jun 2012	I'm planning on running a setup like this (UD5H + 3770k + H100)... My question is whether this chip is special or should all 3770ks handle like this? I'm still undecided whether to get a 3770k or a 2700k... Last edited by xympa; 06-12-12 at 11:03 AM.
	QUOTE Thanks

06-12-12, 11:10 AM	#19
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	My 3770k certainly won't. 4.5GHz takes 1.3v, 4.7 takes almost 1.4v. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

06-12-12, 11:14 AM	#20
xympa Registered Join Date: Jun 2012	Whats the limit if I want to keep it running for a few more years? Too much voltage will degrade the cpu or is it only heat that cause the degradation? (By degradation I mean loss of life expectancy) Last edited by xympa; 06-12-12 at 11:30 AM.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search