Official: What Have I Killed Benching Thread!

I.M.O.G. · 05-23-12, 02:10 PM

Good luck Greg, hope you figure it out... If the board might be wet, maybe give it extra time to dry out.

gregmacknass · 05-23-12, 02:20 PM

Quote:

Originally Posted by txus.palacios

What a pity.... did moocow have something to do with this?

Nope, not this time. This was all me. I previously had problems getting a good mount and finally got a good one, I finished benching one night and flipped the board and let the ice melt. I did a general looksee and didn't see any water anywhere so I went ahead with another session (had done so previously with no problems). I had all sorts of problems like freezes, bios lockup, failed boots, blue screens. I called it a night and tore it down only to find some moisture hiding on the board where I couldn't see it. I put it back together and it was working fine after the water was dried. I ran it last night and it just said

I tore it down today and tested on air, and it was doing the same thing. Not a very happy camper right now, but it's not the end of the world. It was bound to happen eventually I guess.

keny · 05-23-12, 02:46 PM

That sucks man ! Atleast now you have an excuse to buy another

gregmacknass · 05-23-12, 06:20 PM

Well it's official, I do believe I am the first one to kill a 3770k here.

wingman99 · 05-23-12, 08:06 PM

Is your motherboard ok?

jameseboy · 05-23-12, 08:30 PM

Quote:

Originally Posted by gregmacknass

Well it's official, I do believe I am the first one to kill a 3770k here.

was it the one from your sig system?

gregmacknass · 05-23-12, 08:54 PM

Yeah the motherboard is ok. Yeah it's the one in my sig. It's a shame because that was a fairly good chip. Oh well, hope the next one is better.

Bobnova · 05-23-12, 09:05 PM

Ahh that sucks. I've only killed one chip, I wasn't best pleased by that though.

I.M.O.G. · 05-23-12, 09:06 PM

Bummer greg, hope the next one is better!

And congrats on being first!

Tech Tweaker · 06-02-12, 05:20 PM

Well, I think I have my first official kill.

Athlon 64 4000+ Clawhammer (CG) CAA2C 0452CPMW ADA4000DEP5AS

Not sure what happened, it was still working the last time I ran it and when I pulled it out of the computer. It could have something to do with the fact that I pumped 1.8V of Vcore through it while air benching though. I put it in my new (to me) board today though and it wouldn't run, just kept putting out a beep code for a memory error even after I tried multiple sets of memory.

May it rest in peace. It died doing something it was probably never meant to do, try to run at 3GHz with 1.8V and air cooling. It was a fairly good chip I suppose, max stable overclock was 2.8GHz up from the stock 2.4GHz with 1.6V.

I'll have to find another one of them now, because someone beat one of my scores on this chip.

Bobnova · 06-02-12, 06:17 PM

Quote:

Originally Posted by Tech Tweaker

I'll have to find another one of them now, because someone beat one of my scores on this chip.

That's the spirit

xsuperbgx · 06-03-12, 01:01 PM

My 3770k is dead.
Too bad, I thought we would have a long and prosperous relationship.

Bobnova · 06-03-12, 01:02 PM

Ouch. You have my sympathies.
The chip... not so much, it has my annoyance. Thing was supposed to do 7GHz and live for years!

keny · 06-03-12, 10:50 PM

Did you buy the intel increased warranty to cover overclocking ?

I.M.O.G. · 06-03-12, 11:02 PM

Crap super. Do you know if the board lives?

Sorry man, that could have been the best one around here.

TsunamiJuan · 06-11-12, 05:31 AM

Chalk another one up to INSANITY... Well I guess we will call it a sacrifice for the team but we can blame it on stupidity and rushing things.

P8p67 -- borked 8 wires under the cpu socket, have to look them up, if they are just pcie lines they can be worked around, if not its relegated to parts.

This is what i get for rushing a socket removal, Cause I set off the smoke alarm in the process at 3am

can;t say that one went over well with anyone.

Plus someone ate my hot dogs... I was gonna use them to absorb the magic smoke and consume its powers...

Bobnova · 06-16-12, 11:47 PM

Dead 9800GTX+ is dead.
Died somewhere in the process of adding caps and mounting the pot. Don't know what died.
Memory power now has a dead short to GND somewhere post-inductor.

I.M.O.G. · 06-17-12, 12:55 AM

At least ed and Juan have creative stories. Most all others, myself included, are one of two things... I overclocked it and it died, or it worked fine last time I shut down and now something is dead.

BTW, happy fathers day to all our dads subscribed to this thread. Hope you enjoy some time with loved ones.

Spending this weekend with family, and its been a good fathers day so far for me... Spent the night by the camp fire ring with my dad, brother in law, and grandpa. Got my grandpa a new fire ring, got my dad a new cooler (he put about 30 years on his last one)... Got use out of both tonight.

Bobnova · 06-17-12, 02:29 AM

I have vague intentions in the direction of finding the short by supplying it with Plenty of Amps and seeing what explodes.
Doing so without frying any/all working ram (which I might want to have TJuan put on another GDDR3 card) means convincing a PSU that 2v is the new 3.3v and SCP is for suckers. Totally doable, just a question of whether I'm dedicated enough.

TJuan has a better story than I do this round.

TsunamiJuan · 06-17-12, 02:38 AM

I almost setup the video camera for that to, Would of had my fail recorded (again) thats okay i am sure i will get plenty of other fail on film for you all to point and laugh at

05-23-12, 02:10 PM	#421
I.M.O.G. Glorious Leader Join Date: Nov 2002 Location: Rootstown, OH	Good luck Greg, hope you figure it out... If the board might be wet, maybe give it extra time to dry out. __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

05-23-12, 02:46 PM	#423
keny Member Join Date: Jan 2011 Location: England	That sucks man ! Atleast now you have an excuse to buy another
	QUOTE Thanks

05-23-12, 06:20 PM	#424
gregmacknass Member Join Date: Feb 2010 Location: Indiana	Well it's official, I do believe I am the first one to kill a 3770k here. __________________ Gigabyte GA-Z77X-UD5H I7 3770K 4.8 1.42v on water D-TEK Fusion V2 4x2GB OCZ EVGA GTX 295 CO-OP 1.21v 800/1250/1600 EK full cover front and back block Antec EA750 55" Toshiba 55WX800U LED 1080P monitor
	QUOTE Thanks

05-23-12, 08:06 PM	#425
wingman99 Member Join Date: Dec 2003	Is your motherboard ok? __________________ i5 2500K @5.0 GHz Motherboard Gigabyte Z68A-D3-B3 G.SKILL RipjawsX X.M.P. 1600MHz EVGA SuperClocked GTX 570 SOLD Ivy bridge i5 3570k
	QUOTE Thanks

05-23-12, 08:54 PM	#427
gregmacknass Member Join Date: Feb 2010 Location: Indiana	Yeah the motherboard is ok. Yeah it's the one in my sig. It's a shame because that was a fairly good chip. Oh well, hope the next one is better. __________________ Gigabyte GA-Z77X-UD5H I7 3770K 4.8 1.42v on water D-TEK Fusion V2 4x2GB OCZ EVGA GTX 295 CO-OP 1.21v 800/1250/1600 EK full cover front and back block Antec EA750 55" Toshiba 55WX800U LED 1080P monitor
	QUOTE Thanks

Official: What Have I Killed Benching Thread!

Internet Services

Website Development

Tech Hardware

05-23-12, 09:05 PM	#428
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	Ahh that sucks. I've only killed one chip, I wasn't best pleased by that though. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

05-23-12, 09:06 PM	#429
I.M.O.G. Glorious Leader Join Date: Nov 2002 Location: Rootstown, OH	Bummer greg, hope the next one is better! And congrats on being first! __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

06-02-12, 05:20 PM	#430
Tech Tweaker Member Join Date: Dec 2010 Location: Springfield, Ohio	Well, I think I have my first official kill. Athlon 64 4000+ Clawhammer (CG) CAA2C 0452CPMW ADA4000DEP5AS Not sure what happened, it was still working the last time I ran it and when I pulled it out of the computer. It could have something to do with the fact that I pumped 1.8V of Vcore through it while air benching though. I put it in my new (to me) board today though and it wouldn't run, just kept putting out a beep code for a memory error even after I tried multiple sets of memory. May it rest in peace. It died doing something it was probably never meant to do, try to run at 3GHz with 1.8V and air cooling. It was a fairly good chip I suppose, max stable overclock was 2.8GHz up from the stock 2.4GHz with 1.6V. I'll have to find another one of them now, because someone beat one of my scores on this chip. __________________ \m/ OverClockers mATX L33T Club \m/ Main Rig: Socket 775 system\|Case: Cooler Master 690 II Advanced\|Power Supply: Corsair HX620W\|Motherboard: Gigabyte GA-G33M-DS2R\|CPU: Intel Q6600 SLACR C2Q@stock\|RAM: 4GB G.Skill DDR2-1066@stock\|Video: EVGA GTX 260 Core 216\|HDD: Western Digital 160GB Caviar SataII\|DVD: Lite-on DVDRW LH-20A1S\|OS: Windows 7 Professional 64-bit Test Rig: Socket 939 system\|Case: Cooler Master HAF 922\|Power Supply: Corsair HX520W\|Motherboard: DFI UT LP nF4 SLI-DR Expert\|CPU: (varies) A64 3200+ Venice, 3700+ San Diego, 3800+ Venice, 4000+ Clawhammer/San Diego (E4 & E6), A64 X2 4200+ (Manchester & Toledo)\|RAM: (varies) Corsair VS2GB400C3, XL, XLPro, OCZ PC4800 Elite Platinum Edition\|Video Card: eVGA 9800GT\|HDD: Hitachi 80GB Sata II Drive\|DVD: not sure\|OS: Windows XP Home 32-bit/Pro 32-bit My Heat
	QUOTE Thanks

06-03-12, 01:01 PM	#432
xsuperbgx Benching Team Leader Join Date: Dec 2006 Location: Ut.	My 3770k is dead. Too bad, I thought we would have a long and prosperous relationship. __________________ Come join in on the benching fun! Competitions, contests, prizes. + Learn tips and tricks to get a better score. Benching:3570K.................................................. ......................................... Asus Rampage V Gene.................................................. ......................................Join us in the "OVERCLOCKTAGON"!!! Gaming: Intel 2500K...............................Htpc: Silverstone GD05B HD7970.................................................Pentium G840 Z68X-UD3H-B3.......................................H67M-D2-B3 Vertex 3..................................................Hd5450, Lenovo N5902 heat..................................................BF3/origin= Circling_Urubu
	QUOTE Thanks

06-03-12, 01:02 PM	#433
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	Ouch. You have my sympathies. The chip... not so much, it has my annoyance. Thing was supposed to do 7GHz and live for years! __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

06-03-12, 10:50 PM	#434
keny Member Join Date: Jan 2011 Location: England	Did you buy the intel increased warranty to cover overclocking ?
	QUOTE Thanks

06-03-12, 11:02 PM	#435
I.M.O.G. Glorious Leader Join Date: Nov 2002 Location: Rootstown, OH	Crap super. Do you know if the board lives? Sorry man, that could have been the best one around here. __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

06-11-12, 05:31 AM	#436
TsunamiJuan Member Join Date: Mar 2011 Location: Soviet Mexico	Chalk another one up to INSANITY... Well I guess we will call it a sacrifice for the team but we can blame it on stupidity and rushing things. P8p67 -- borked 8 wires under the cpu socket, have to look them up, if they are just pcie lines they can be worked around, if not its relegated to parts. This is what i get for rushing a socket removal, Cause I set off the smoke alarm in the process at 3am can;t say that one went over well with anyone. Plus someone ate my hot dogs... I was gonna use them to absorb the magic smoke and consume its powers... __________________ Get the hot dogs out, this baby's going up in Flames!!! Keeper Of The VaseAtone™ Bobnova: humans need SMART functionality Deanzo: Matts hat is too high a res for the video feed, that is the issue Currently Doing Stupid OC tricks with A10 5800k @ A85X chipset Asus M4N82 nforce980a mb, Phenom II 940 be @ 6000.1mhz (Bobnova'd) , 4gb DDR2 1066 Gigabyte a75-ud4h , 3870k @ 6016.7mhz, 2.358vcore Asus MIVE, i7 2600k @ 5899.7mhz Benching Rig RIP Died doing what it did best ASUS MIVE, i7 2600k @ 5.2ghz 1.49vcore, noctua NH-D14 2000 AMD e350 Cold Fusion - IceCream Special Ln2 Pot (the most fun you can have 130$ and ln2)
	QUOTE Thanks

06-16-12, 11:47 PM	#437
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	Dead 9800GTX+ is dead. Died somewhere in the process of adding caps and mounting the pot. Don't know what died. Memory power now has a dead short to GND somewhere post-inductor. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

06-17-12, 12:55 AM	#438
I.M.O.G. Glorious Leader Join Date: Nov 2002 Location: Rootstown, OH	At least ed and Juan have creative stories. Most all others, myself included, are one of two things... I overclocked it and it died, or it worked fine last time I shut down and now something is dead. BTW, happy fathers day to all our dads subscribed to this thread. Hope you enjoy some time with loved ones. Spending this weekend with family, and its been a good fathers day so far for me... Spent the night by the camp fire ring with my dad, brother in law, and grandpa. Got my grandpa a new fire ring, got my dad a new cooler (he put about 30 years on his last one)... Got use out of both tonight.
	QUOTE Thanks

06-17-12, 02:29 AM	#439
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	I have vague intentions in the direction of finding the short by supplying it with Plenty of Amps and seeing what explodes. Doing so without frying any/all working ram (which I might want to have TJuan put on another GDDR3 card) means convincing a PSU that 2v is the new 3.3v and SCP is for suckers. Totally doable, just a question of whether I'm dedicated enough. TJuan has a better story than I do this round. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

06-17-12, 02:38 AM	#440
TsunamiJuan Member Join Date: Mar 2011 Location: Soviet Mexico	I almost setup the video camera for that to, Would of had my fail recorded (again) thats okay i am sure i will get plenty of other fail on film for you all to point and laugh at __________________ Get the hot dogs out, this baby's going up in Flames!!! Keeper Of The VaseAtone™ Bobnova: humans need SMART functionality Deanzo: Matts hat is too high a res for the video feed, that is the issue Currently Doing Stupid OC tricks with A10 5800k @ A85X chipset Asus M4N82 nforce980a mb, Phenom II 940 be @ 6000.1mhz (Bobnova'd) , 4gb DDR2 1066 Gigabyte a75-ud4h , 3870k @ 6016.7mhz, 2.358vcore Asus MIVE, i7 2600k @ 5899.7mhz Benching Rig RIP Died doing what it did best ASUS MIVE, i7 2600k @ 5.2ghz 1.49vcore, noctua NH-D14 2000 AMD e350 Cold Fusion - IceCream Special Ln2 Pot (the most fun you can have 130$ and ln2)
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search