once over for parts list please

3 x Yate Loon 140mm Medium Speed Silent Case Fan - D14SM-12 - Sleeved
- Cable: Convert to 3-Pin only (Cut off extra connectors) - Sleeved
- Sleeve Color: Black
- Heatshrink Color: Black $26.85
1 x Koolance QDC (High Flow) Shutoff Nozzle, Male Compression [13mm, 1/2”] $8.99
1 x Koolance QDC (Low Profile) Shutoff Nozzle, Female Threaded G 1/4 $7.49
1 x *** NEW *** Alphacool NexXxoS XT45 Full Copper 420mm $83.99
1 x *** NEW *** Swiftech Maelstrom 5 1/4" Dual Bay w/ Single MCP35X Pump
- Fitting Size: No Fittings $179.95
1 x *** HOT *** Koolance CPU-380I Water Block (Intel Processor)
- Nozzles: No Nozzles $74.95
7 x *** NEW *** PrimoFlex Advanced LRT Tubing - 1/2in. ID X 3/4in. OD - Bloodshed Red



I already have fittings and pt nuke so don't need those. I was originally going to use the swiftech drive II pump/block but decided to go a different route as much as I wanted to try it.

Thanks!

Your QDCs won't match. They need to be the same type (either both low profile or both high flow)

Also, from your other thread, the male QDC you have listed is for 1/2" ID 5/8" OD. Your tubing is 1/2" ID 3/4" OD so that won't work either.

Thank you for catching that!

Anytime I went through the process of picking out QDCs for my PS3 loop a while back, so I'm glad I can put my research to good use now

Yeah qdc are new ground for me.

I'm still not sure where I'll put it but I was thinking the res outlet.

Put it towards the bottom of your loop so you can use it for draining.

Modz

As Modz said, lowest part of the loop. Let gravity do the work for you.