- Joined
- Oct 18, 2002
- Location
- Sweden
CG7 won't even boot!
HI there fellows!
Need help really badly !
I bought myself a new IC7 and P4 2.6c with some RAM and set it up. It wasn't a great o/c so I thought of flashing a BIOS to improve on stability perhaps.
Well you know the rest... Something went wrong.
First thing I didn't set my old BIOS to defaults before... Flashing past like a charm, no problems no errors nothing. It flashed it great. I read on ABIT homepage that you should clear the CMOS after you flash BIOS. So after a reboot I held the power button for 5 sec to turn off the computer.
I cleared the CMOS turned my comp on...
Everything is turning on, fans, CD-Drives, Harddrive ( not floppy, I can't hear it or see the diod flash ), but my monitor stays black
and the diod on monitor is the one flashing ( like when you leave your comp for a 20 min and monitor goes black )
Then I tried something else:
I took out battery, all the ATX cables and waited for 2-3 min and put in battery and then cables
( didn't touch CMOS jumper )
but nothing happened =(
Comp doesn't respond to anything ( pressing buttons and stuff ) not even Ctrl+Alt+Del. You can open and close CD-drives ( didn't try putting any CD in them ).
After I hear HD work at the startup its diod will stay litted for a few minutes and first then it will turn off.
Well this is all. I sure hope someone can be able to help me put with something! I really am desperate right now =(
Any help would be greatly appreciated!
Thanks in advance!
P.S. I forgot to add that tere are no beeps at all.
HI there fellows!
Need help really badly !
I bought myself a new IC7 and P4 2.6c with some RAM and set it up. It wasn't a great o/c so I thought of flashing a BIOS to improve on stability perhaps.
Well you know the rest... Something went wrong.
First thing I didn't set my old BIOS to defaults before... Flashing past like a charm, no problems no errors nothing. It flashed it great. I read on ABIT homepage that you should clear the CMOS after you flash BIOS. So after a reboot I held the power button for 5 sec to turn off the computer.
I cleared the CMOS turned my comp on...
Everything is turning on, fans, CD-Drives, Harddrive ( not floppy, I can't hear it or see the diod flash ), but my monitor stays black
and the diod on monitor is the one flashing ( like when you leave your comp for a 20 min and monitor goes black )
Then I tried something else:
I took out battery, all the ATX cables and waited for 2-3 min and put in battery and then cables
( didn't touch CMOS jumper )
but nothing happened =(
Comp doesn't respond to anything ( pressing buttons and stuff ) not even Ctrl+Alt+Del. You can open and close CD-drives ( didn't try putting any CD in them ).
After I hear HD work at the startup its diod will stay litted for a few minutes and first then it will turn off.
Well this is all. I sure hope someone can be able to help me put with something! I really am desperate right now =(
Any help would be greatly appreciated!
Thanks in advance!
P.S. I forgot to add that tere are no beeps at all.
Last edited: