Whats the best configuration Reservior, T, Y

COuld someone point me which of these are the nest configurations, and give me some links with pinctures of these setups?

Thanks

I prefer a submerged pump because it is queiter and easier to fill/bleed than an inline pump. Inline pumps take up less space inside your case. I'll post a few links. The search button is your friend. That's where I found these links, and there's tons more.

http://forum.oc-forums.com/vb/showthread.php?s=&threadid=139004&highlight=picture

http://forum.oc-forums.com/vb/showthread.php?s=&threadid=126270&highlight=picture
http://forum.oc-forums.com/vb/showthread.php?s=&threadid=119808&highlight=picture

OK, let me see if i understud. The T should be located at a top point i nthe case and should be used with an inline pump. Also that the "I" of the "T" should hace a very small hose going up and sealed.

A'm i in a good direction here?

yeah, it sounds like you've got it. Here's another good link for you. http://www.wc101.com/guides/t-line/

Thanks Neomoses. One more quick question. DO i have to seal the hose going up? What waterlblock would you recommend mine is not good or a need a new clip to holding it sonce my board dosent have holes?

Thanks Again

I would recommend sealing the T-Line, as if the computer gets bumped it may splash water. A stopcock would be ideal, but if you cannot readily find one a bolt will work. Simply find a bolt that fits snugly in your tubing, thread it into the line and seal with a hose clamp. You shouldn't have any problems.

What waterblock do you have now? I would probably recommend a Maze3 or TC-4 if you are buying a new block. If buying new, get a metal top. It'll save you some hassle later.

Thanks Neo. I got my block from sysfx.net. It has a good finish but the clip they send you eith the block sucks. It just a hard wired bended to the need. I'll try to do some socket handling to test and see if it works.

Thanks again for all your help!!