- Joined
- May 27, 2009
Okay iv been looking for a few weeks for ways to overclock my board, the bios dont offer anything and i cant find new bios for my board as well. My comp runs 20C on idle and 35 at full as well.
Heres my comp specs.
Mainboard : ECS 945GCT-NM
Manufacturer : ECS
Product : 945GCT-NM
Version : 1.0
Serial Number : 00000000
Support MP : Yes, 2 CPU(s)
Version MPS : 1.4
Chipset : Intel i945G/GZ
Processor : Intel Pentium E2160 @ 1800 MHz
Physical Memory : 5120 MB
Memory Controller : DIMM, SDRAM
Number of connectors : 4
Supported Speed : Unspecified
Supported Voltages : 3.3v
Error Detection Method : 64-bit ECC
Error Correction Capability : None
Current/Supported Interleave : 1-way/1-way
Video Card : NVIDIA GeForce 9600 GSO
Hard Disk : WDC (400 GB)
DVD-Rom Drive : Optiarc DVD RW AD-7173A
Monitor Type : Gateway FPD1975W - 19 inches
Network Card : Realtek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3
DirectX : Version 9.0c (September 2009)
Heres my comp specs.
Mainboard : ECS 945GCT-NM
Manufacturer : ECS
Product : 945GCT-NM
Version : 1.0
Serial Number : 00000000
Support MP : Yes, 2 CPU(s)
Version MPS : 1.4
Chipset : Intel i945G/GZ
Processor : Intel Pentium E2160 @ 1800 MHz
Physical Memory : 5120 MB
Memory Controller : DIMM, SDRAM
Number of connectors : 4
Supported Speed : Unspecified
Supported Voltages : 3.3v
Error Detection Method : 64-bit ECC
Error Correction Capability : None
Current/Supported Interleave : 1-way/1-way
Video Card : NVIDIA GeForce 9600 GSO
Hard Disk : WDC (400 GB)
DVD-Rom Drive : Optiarc DVD RW AD-7173A
Monitor Type : Gateway FPD1975W - 19 inches
Network Card : Realtek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3
DirectX : Version 9.0c (September 2009)