- Joined
- Dec 10, 2011
- Location
- Cádiz (Spain)
Any store that sells them in Europe?
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
Stock can be 1.5v or 1.35v. I currently have it running 24/7 crunching Rosetta at stock speed and timing with 1.35v. Sorry for the confusion.maybe i missed something, in your review you show 1.5v needed for stock speed/timings. however newegg shows 1.35v needed for stock speed/timings. running 1.6 or 1.65v for a short period of time is not going to hurt the ram. it is nice to see budget ram kicking *** agian for price/gb and for its ocing ability.
i should have asked this the first time, can you post the IC info?
You can read what is on the IC's in a picture in the article.. at least in the featured image on the front page you can clearly read the numbers... is that what you are looking for?
These remind me of the old BH-5 budget ram days. I hope they live up to it for sure.maybe i missed something, in your review you show 1.5v needed for stock speed/timings. however newegg shows 1.35v needed for stock speed/timings. running 1.6 or 1.65v for a short period of time is not going to hurt the ram. it is nice to see budget ram kicking *** agian for price/gb and for its ocing ability.
@Mattno5ss
Can you put this in your very first post. since it will then be visible under the article on the frontpage?
yea if sammy specc'd it for 1.35v that would explain how they clock so well. it has been a while since i have seen sammy make good IC's for ocing.
thanks for the review on them, should have said that before. got caught up in the specs and make sure i was looking at the right ram on newegg. work computer blocks redirects. :X
yea most of the pics i looked at in the article were to small for me to make anything out. as in the resolution was to small and some of the numbers ect were fuzzy in the image.You can read what is on the IC's in a picture in the article.. at least in the featured image on the front page you can clearly read the numbers... is that what you are looking for?
accorind to the JEDEC specs from CPUz these are actually rated for 1.28v @1600mhz.
View attachment 102450
I am unfortunately unable to test and see if they work since 1.3v is as low as my bios goes on DRAM voltages. they did post @ 1.3v for stock speeds but I didn't test since there is no point really on undervolting your ram.
I'll wait to see how it goes and then pull the trigger.I'll be your huckleberry. A set is on the way and I'll post as I play with them.
They arrive on Monday. I was hoping to get them today but no luck.I'll wait to see how it goes and then pull the trigger.