Lots of little bubbles...

Ok so I just got my rig all hooked up and filled and I turn on the pump and watch the water circulate through and then turn cloudy white. I thought I bled most of the bubbles out but now there are lots of little bubbles that look like foam in my tubing. How do I get these out? Will they just bleed off my T line eventually or should I not run the pump and let them settle then try to bleed them myself? Thanks...

takes about 2h to get them out........ even overnight~

Try shaking the block and the rad.
Rob

just pretend its not there.. the tee will do all the work

Take the system and fill it in a bucket of water. You wont get very many bubbles.