Old Skool Q- Thumb Drives

WarriorII · May 16, 2012

Ok, the CC is upon us.

Borging is always on my mind and it's been a while since I've done this.

Fold from a Thumb drive.

Anyone currently doing this?

Client version?

I think what I did before, was to install it, then shut it down (off)
and cut and paste the files onto a thumb drive.

Then run it from the thumb drive on what ever pc I using at the time.
When I was done I could remove the drive and take it with me.

Having FULL ADMIN rights and permission on the PC of course.

Anyone currently Borging machines?

Shelnutt2 · May 16, 2012

If you mean to take the same drive from computer to computer, with smp clients you must run the same # of threads or it'll restart the work unit. So if you go from a 4 core machine to a 2 core machine. You still need to run -smp 4 if you started the workunit with that.

WarriorII · May 16, 2012

Just a 2 core machine is all.

No SMP on a daily basis for me.

Rpkole · May 16, 2012

WarriorII said:
Anyone currently Borging machines?

i think this counts as a borg cube that is sitting in my office :clap:

Fever · May 16, 2012

Very nice!! What's in the boxes? Must generate a lot of heat.

WarriorII · May 17, 2012

RpK!!!!!

long time no see !!!!!!!!!

Nice Room Heater !

dark bishop · May 18, 2012

any info about a notfred type usb client?

WarriorII · May 18, 2012

dark bishop said:
any info about a notfred type usb client?

I never could get that one to work for me for some reason.

Could have been the ID -10T error I encountered.

Might try the 6.34 install, and transfer the files over to a usb from there.

dark bishop · May 18, 2012

might work

Old Skool Q- Thumb Drives

WarriorII

Moderator #666

Shelnutt2

Overclockers Team Content Editor

WarriorII

Moderator #666

Rpkole

Member

Fever

Member

WarriorII

Moderator #666

dark bishop

Member

WarriorII

Moderator #666

dark bishop

Member

Similar threads