- Joined
- Jun 29, 2008
- Location
- Crewe, U.K
- Thread Starter
- #21
Finlay got my camera working. Some pics of the set-up so far.
You'll see I've got zip ties on the chiller in/out pipes. These aren't permanent! I hate using ties and wouldn't use them inside the case. I'm due to get a handful more of the plastic XSPC clips I'm already using. The inside of the flash cooler's not to pretty either. It was in a shed for 2 years covered in crap! Still needs a proper clean.
The thermometer inside the case is a from the brewery too. That's why it says Cellar on it with an arrow for recomended room temperature of beer barrel storage. It's not to easy to see but it's showing about 19C. It reads a fair bit colder when the case side is closed.
The temperature gage in the cooler is from one of the larger chillers so it sticks out from the case a bit! Still works well though. The chiller had only been on 10 minutes when I took the pics, showing 0C. It usually drops to about -3C.
You'll see I've got zip ties on the chiller in/out pipes. These aren't permanent! I hate using ties and wouldn't use them inside the case. I'm due to get a handful more of the plastic XSPC clips I'm already using. The inside of the flash cooler's not to pretty either. It was in a shed for 2 years covered in crap! Still needs a proper clean.
The thermometer inside the case is a from the brewery too. That's why it says Cellar on it with an arrow for recomended room temperature of beer barrel storage. It's not to easy to see but it's showing about 19C. It reads a fair bit colder when the case side is closed.
The temperature gage in the cooler is from one of the larger chillers so it sticks out from the case a bit! Still works well though. The chiller had only been on 10 minutes when I took the pics, showing 0C. It usually drops to about -3C.
Last edited: