Need Assistance If Possible Please.

PoisonXA · 07-15-12, 07:43 PM

i just got a x7dca-l with two e5405 processors ive tried to get setfsb to change the clock speed but with no avail is there something im doing wrong maybe? is there a flash anyone knows of to unlock the pll? im lost since i dont think i can do a tape mod on this board because it doesnt suppot 1600 fsb

Shelnutt2 · 07-15-12, 08:15 PM

According to XS the only thing to do is pin mod the cpus.

PoisonXA · 07-15-12, 08:32 PM

Quote:

Originally Posted by Shelnutt2

According to XS the only thing to do is pin mod the cpus.

but that mobo doesnt suppot 1600fsb itll crap out

Shelnutt2 · 07-15-12, 08:37 PM

Quote:

Originally Posted by PoisonXA

but that mobo doesnt suppot 1600fsb itll crap out

Only one way to find out if it can support it, or if it won't boot.

http://www.xtremesystems.org/forums/...-mod-Xeon-54xx!

Worst case just take the tape off the pins.

I don't find any other way to overclock the board besides pin mod.

PoisonXA · 07-15-12, 08:38 PM

i know i have a x7dcu that ive taken to 1589 almost 1600 but ive heard some boards can go over it all depends on ur luck so ill see

~

DaveB · 07-17-12, 08:08 AM

Back in 2008 I built a nice little 8-core setup around Supermicro X7DCA-L Micro ATX in a Lian Li PC-V350B SFF Cube Case. I used a pair of quad core E5340 ES 1066 FSB Clovertowns, tape modded to 3 GHz @ 1333 FSB with 12GB (6 x 2GB) DDR2-667 Reg/ECC RAM. The video card was an eVGA 9800 GX2 1GB Dual GPU which just fit in thal Lian Li cube case. The Lian Li came with dual 120mm inlet fans at the front which were right next to the Xeons, providing fresh cool air for the HS/Fans. A couple of slot coolers cleared out any heat from either side of the 9800 GX2 although it did have a fan between the two cards that exhausts heat out the back also. The power supply was an Antec Earth Watts 650W which did a nice job of powering everything nice and stable.

07-15-12, 07:43 PM	Thread Starter #1
PoisonXA New Member Join Date: Jul 2012	Need Assistance If Possible Please. i just got a x7dca-l with two e5405 processors ive tried to get setfsb to change the clock speed but with no avail is there something im doing wrong maybe? is there a flash anyone knows of to unlock the pll? im lost since i dont think i can do a tape mod on this board because it doesnt suppot 1600 fsb
	QUOTE Thanks

07-15-12, 08:15 PM	#2
Shelnutt2 Overclockers Team Content Editor Join Date: Jun 2005 Location: /home/	According to XS the only thing to do is pin mod the cpus. __________________ Build!.Borg!.Recruit!.Folding.for.Team.32! Gigabyte P35-DS3R, E6300, 2x512MB Team Group DDR2 667, EVGA 7800GT Heat Want to run the folding@home gpu client in linux? www.linuxfah.info Your teacher is a dumbass. The equation is exact. ~Frodo Baggins Damn....It's 12:00 AM and I thought my 805 would be a magic pumkin and turn into a conroe.........boy was I fooled:) ~Stilletto This is what I get for not only being a newb, but also disregarding instructions! ~ShadowPho I hate women... but im not gay lol. ~MrCrowley Love can fade but knowledge stays forever (unless you develop alzheimers). ~Constantinos
	QUOTE Thanks

07-15-12, 08:38 PM	Thread Starter #5
PoisonXA New Member Join Date: Jul 2012	i know i have a x7dcu that ive taken to 1589 almost 1600 but ive heard some boards can go over it all depends on ur luck so ill see ~
	QUOTE Thanks

07-17-12, 08:08 AM	#6
DaveB Senior Member Join Date: Dec 2000 Location: Gainesville, VA	Back in 2008 I built a nice little 8-core setup around Supermicro X7DCA-L Micro ATX in a Lian Li PC-V350B SFF Cube Case. I used a pair of quad core E5340 ES 1066 FSB Clovertowns, tape modded to 3 GHz @ 1333 FSB with 12GB (6 x 2GB) DDR2-667 Reg/ECC RAM. The video card was an eVGA 9800 GX2 1GB Dual GPU which just fit in thal Lian Li cube case. The Lian Li came with dual 120mm inlet fans at the front which were right next to the Xeons, providing fresh cool air for the HS/Fans. A couple of slot coolers cleared out any heat from either side of the 9800 GX2 although it did have a fan between the two cards that exhausts heat out the back also. The power supply was an Antec Earth Watts 650W which did a nice job of powering everything nice and stable. __________________ 1. MSI Z87-G41, i5 4670K, 8GB Kingston HyperX DDR3-1600, Kingston HyperX 128GB SATA III SSD, Galaxy GTX 650 TI 2. Xigmatek GIGAS mATX Case, Supermicro X7DCA-L, 2 x L5408 Xeons @ 2.66 GHz, 24GB Crucial DDR2-667 Reg/ECC, Intel 80GB SSD, PowerColor HD 7750 Video 3. Acer AS5750-9422, 15.6", Core i7-2670QM Laptop, 4GB DDR3-1333, HD 3000 Graphic 4. Old Antec Case, Asus PC-DL, 2 x 1.6 LV D1 Xeons @ 3 GHz, 2GB Corsair PC3200 (4x512MB) @ 200 MHz, Chaintech 6800 128MB AGP Video
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Need Assistance If Possible Please.

Internet Services

Website Development

Tech Hardware