- Joined
- Jul 14, 2002
- Location
- Royal oak, Mi
So I've had the chance to play around with a SD 4000, and this is what i've come up with.
Spec
DFI lanparty NF4 ultra D
Athlon SD 4000
2gbs od corsair value ram (I have some Corsair XMS ddr550) but it doesn't do 1T timing, and th board autosets it as 1t and for the life of me i can't find a way to change it. tons of timing options but no 1t or 2t.) end rant
Li lian 65b case
antec smartpower 2.0 500 watt psu
ATI x700
XP-90 with a vantec stealth 92mm fan
Maxtor 250gb sata 16mb cache.
Note this is a workstation computer. For word Processing and Cad work.
So far, i've gotten this computer to boot at 2.88 ghz 240x12, But it wasn't very stable. THe highest stable speed i've found so far is 230x12 2.76 ghz at 1.525 vcore.
The chip doesn't run too hot. But gets up there running prime. idle is about 29 degs at stock speeds and 33 at 2.76. load makes it all the way up to 48 when overclocked.
Overall it's a fast chip, and i'm looking forward to being able to get it stable above 2.8
Spec
DFI lanparty NF4 ultra D
Athlon SD 4000
2gbs od corsair value ram (I have some Corsair XMS ddr550) but it doesn't do 1T timing, and th board autosets it as 1t and for the life of me i can't find a way to change it. tons of timing options but no 1t or 2t.) end rant
Li lian 65b case
antec smartpower 2.0 500 watt psu
ATI x700
XP-90 with a vantec stealth 92mm fan
Maxtor 250gb sata 16mb cache.
Note this is a workstation computer. For word Processing and Cad work.
So far, i've gotten this computer to boot at 2.88 ghz 240x12, But it wasn't very stable. THe highest stable speed i've found so far is 230x12 2.76 ghz at 1.525 vcore.
The chip doesn't run too hot. But gets up there running prime. idle is about 29 degs at stock speeds and 33 at 2.76. load makes it all the way up to 48 when overclocked.
Overall it's a fast chip, and i'm looking forward to being able to get it stable above 2.8