[valinos]

I've got a stick of Mushkin 512MB PC2700 with the timings listed in the pic. I'm running an Athlon 1600+ AROIA oc'ed to a 151 FSb (Sandra reports 152) on a Soltek 75drv5 mobo (KT333). What's the deal with these low ass scores? Shouldn't I be getting something like 2500 on the Int score at least? Higher? I can't go beyond the SPD setings on the memory (166) with this mobo either, which is kind of a bummer...but still shouldn't I be getting better results for PC2700 memory?

[OnDborder]

I started testing mine at 9x166, it was 2357/2170.
The highest was 9x200, it was 2750/2522.
My SamieDTL 2700 256 at 9x166 was 2305/2164.

I'm not an expert but @ 151fsb that's about right..

[texasfit]

The following tests were with a P4 1.6A so there will be some variation, but maybe you can use them to compare:
SiSoft Sandra

Memory set to 3:4 Cas2-3-6-3 with PCI locked at 75/37

. . . . . . . . . . . . . . . . . . . Memory . . . . . . . CPU . . . . . . . . Media . . . . . vcore . . . . Mem Mhz
2136mhz 133fsb = . . 2670 / 2671 . . 4109 / 2595 . . . 8374 / 10507 . . . 1.46v . . . . 356mhz . . . . 1.6A
2248mhz 140fsb = . . 2826 / 2826 . . 4338 / 2743 . . . 8839 / 11093 . . . 1.46v . . . . 376mhz . . . . 1.6A
2328mhz 145fsb = . . 2923 / 2918 . . 4562 / 2837 . . . 9138 / 11472 . . . 1.54v . . . . 387mhz . . . . 1.6A
2408mhz 150fsb = . . 3024 / 2928 . . 4494 / 2928 . . . . . skipped. . . . . . 1.60v . . . . 400mhz . . . . 1.6A

Memory set to 1:1 Cas2-2-6-2

2488mhz 155fsb = . . 2323 / 2323 . . 4882 / 3026 . . . 9768 / 12261 . . . 1.60v . . . . 310mhz . . . . 1.6A
2540mhz 160fsb = . . 2395 / 2392 . . 5024 / 3101 . . 10021 / 12576 . . . 1.68v . . . . 320mhz . . . . 1.6A

[OnDborder]

Originally posted by texasfit
The following tests were with a P4 1.6A so there will be some variation, but maybe you can use them to compare:
SiSoft Sandra

Memory set to 3:4 Cas2-3-6-3 with PCI locked at 75/37

. . . . . . . . . . . . . . . . . . . Memory . . . . . . . CPU . . . . . . . . Media . . . . . vcore . . . . Mem Mhz
2136mhz 133fsb = . . 2670 / 2671 . . 4109 / 2595 . . . 8374 / 10507 . . . 1.46v . . . . 356mhz . . . . 1.6A
2248mhz 140fsb = . . 2826 / 2826 . . 4338 / 2743 . . . 8839 / 11093 . . . 1.46v . . . . 376mhz . . . . 1.6A
2328mhz 145fsb = . . 2923 / 2918 . . 4562 / 2837 . . . 9138 / 11472 . . . 1.54v . . . . 387mhz . . . . 1.6A
2408mhz 150fsb = . . 3024 / 2928 . . 4494 / 2928 . . . . . skipped. . . . . . 1.60v . . . . 400mhz . . . . 1.6A

Memory set to 1:1 Cas2-2-6-2

2488mhz 155fsb = . . 2323 / 2323 . . 4882 / 3026 . . . 9768 / 12261 . . . 1.60v . . . . 310mhz . . . . 1.6A
2540mhz 160fsb = . . 2395 / 2392 . . 5024 / 3101 . . 10021 / 12576 . . . 1.68v . . . . 320mhz . . . . 1.6A

I don't think my board can adjust the memory to 3:4..

How do you "lock" the PCI?

[texasfit]

Originally posted by OnDborder


I don't think my board can adjust the memory to 3:4..

How do you "lock" the PCI?

I don't believe any Athlon boards have a PCI lock or a 3:4 memory timing ratio.

Ignore everything except the Memory Mhz speed and the Benchmark for that speed as comparisons.