Notices

Overclockers Forums > Hardware > Video Cards > General GPU
General GPU
Forum Jump

broke 10k but...

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 08-05-02, 08:39 PM Thread Starter   #1
KCN
Registered



Join Date: Jun 2002
Location: London, UK

 
broke 10k but...


ok tonight i broke 10000 in 3dmk 2001 but had to go to the extreme of visibility to get it (wasn't pretty at all) has anyone had problems with a kr7a above 157Mhz fsb? i'm sure that my system can go further but i don't know where to start. i have mem at most aggressive timings, my vid card was clockrd to near death and i was running a minimal istal of 98se. what more can i try?
any suggestion is welcome.
KCN is offline   QUOTE Thanks
Old 08-05-02, 08:44 PM   #2
Yodums
Senior Member

 
Yodums's Avatar 

Join Date: Oct 2001
Location: Ottawa, Canada

 
What is your voltage? What are your full system specs? You might want to try better northbridge cooling + 3.65 VIO on it. Perhaps your memory is crapping out, try a higher vdimm, or maybe your chip needs more voltage.

__________________
Peter Gibbons: Let me ask you something. When you come in on Monday, and you're not feelin' real well, does anyone ever say to you, 'Sounds like someone has a case of the Mondays'?

Lawrence: No. No, man. ****, no, man. I believe you'd get your ass kicked sayin' something like that, man.
Yodums is offline   QUOTE Thanks
Old 08-05-02, 10:20 PM   #3
Illah
Member

 
Illah's Avatar 

Join Date: Mar 2002
Location: San Francisco

 
Re: broke 10k but...


Quote:
Originally posted by KCN
ok tonight i broke 10000 in 3dmk 2001 but had to go to the extreme of visibility to get it (wasn't pretty at all)
What do you mean by that? You mean there was garbage on screen or something? If so you went too far on the video overclock. If you mean you had to run it on the lowest settings and no AA and stuff that's a common practice for getting the higest possible score.

--Illah
Illah is offline   QUOTE Thanks
Old 08-06-02, 05:02 AM Thread Starter   #4
KCN
Registered



Join Date: Jun 2002
Location: London, UK

 
northbridge cooling is stock,
full specks,
kr7a-r, xp1800@1806, corsair xms2700, rad 8500, 2xmaxtor 740s in raid 0, diva isdncard, soundbalster audigy, hauppauge win tv pci
voltages are maxed out on the bo0ard temps for the cpu are good (about 40c but thats in a quiet power case if i push the cpu 1 mhz higher the bench just freezes at a random point (no bsod just stops on one frame of the bench)
card was clocked too much so output was garbage just did it to see if i could break 10k,
my normal compare is: http://service.madonion.com/compare?2k1=4117416
and with pushing it to far: http://service.madonion.com/compare?2k1=4126523
KCN is offline   QUOTE Thanks
Old 08-06-02, 12:23 PM   #5
EclipseJP
Member



Join Date: Nov 2001
Location: In front of my Computer

 
Wow. I cant even get 10k. My system specs are below. Is windows 98 faster for doing 3dmark then XP. I can get my fsb to 180 and beond and my Radeon to 305/305. Radeon and CPU are watercooled so I dont have probs with that. What am I doin wrong?
EclipseJP is offline   QUOTE Thanks
Old 08-06-02, 12:52 PM   #6
Nikoror
Member

 
Nikoror's Avatar 

Join Date: Jul 2002
Location: Sofia, Bulgaria

 
Probably radeon is wrong just kidding. what's your ram type. I get about 100 more points under XP
Nikoror is offline   QUOTE Thanks
Old 08-06-02, 03:08 PM   #7
Dieni
Member

 
Dieni's Avatar 

Join Date: Jul 2001
Location: Malta

 
With an Athlon XP 1600+ @ 1670MHz (Agoia) ASUS A7V333 and Radeon 8500 LE @ 300/620, the highest I got was http://service.madonion.com/compare?2k1=3801949

Now with a P4 1.8A @ 2.4Ghz and an ASUS P4S533, this is the score I got http://service.madonion.com/compare?2k1=3928433
Dieni is offline   QUOTE Thanks
Old 08-06-02, 10:38 PM   #8
gotey
Registered

 
gotey's Avatar 

Join Date: Aug 2001
Location: State of Confusion

 
EclipseJP,
have you tried running at 166/166? that should put you ~9700. a boost of FSB to 175 leaving the memory at 166 will get you over 10000. I have to set my memory to 2.5 3-6-3 on "fastest" setting

I have a unlocked xp1600 on the 8K3A mobo using 256mb of Samsung PC2100. I also use winXP (not that I am proud of that or anything)

I get 10021 3dmarks2k1
gotey is offline   QUOTE Thanks
Old 08-07-02, 12:16 PM   #9
EclipseJP
Member



Join Date: Nov 2001
Location: In front of my Computer

 
Maybe my Radeon has some slow memory. Ill try the 166 thing.
EclipseJP is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Video Cards > General GPU
General GPU
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 02:40 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?