dxiw
Disabled
- Joined
- Feb 7, 2002
on my A7V333 the 4:5 only goes to 145 fsb. I can do 13x140=1820mhz 4:5 (ddr350) and cas2 perfect. I can also do 13x145=1885mhz 1:1 (ddr290) and cas2 perfect. I can't do anything above 141 with 4:5 on. Is it worth to go 145 fsb or 140? benchmarks seem higher at 145 fsb even the memory is higher i sandra which is weird. At 146 fsb it hangs after going into windows because my network card can't take 37pci. If i take it out I can get to 150fsb or so with 1:1. My ultimate goals are: watercooling, overvolt mobo to 2.1V, 160fsb (new divider only 32pci), 1:1 320mhz, and cas2. I think 13x160 is attainable with the volts as I've done it before but the temps were enomrously high so I had to back off. It's only 2080 mhz.